]> git.sur5r.net Git - openocd/blob - src/jtag/commands.h
interface: define TMS sequence command
[openocd] / src / jtag / commands.h
1 /***************************************************************************
2  *   Copyright (C) 2005 by Dominic Rath                                    *
3  *   Dominic.Rath@gmx.de                                                   *
4  *                                                                         *
5  *   Copyright (C) 2007,2008 Ã˜yvind Harboe                                 *
6  *   oyvind.harboe@zylin.com                                               *
7  *                                                                         *
8  *   Copyright (C) 2009 Zachary T Welch                                    *
9  *   zw@superlucidity.net                                                  *
10  *                                                                         *
11  *   This program is free software; you can redistribute it and/or modify  *
12  *   it under the terms of the GNU General Public License as published by  *
13  *   the Free Software Foundation; either version 2 of the License, or     *
14  *   (at your option) any later version.                                   *
15  *                                                                         *
16  *   This program is distributed in the hope that it will be useful,       *
17  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
18  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
19  *   GNU General Public License for more details.                          *
20  *                                                                         *
21  *   You should have received a copy of the GNU General Public License     *
22  *   along with this program; if not, write to the                         *
23  *   Free Software Foundation, Inc.,                                       *
24  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
25  ***************************************************************************/
26 #ifndef JTAG_COMMANDS_H
27 #define JTAG_COMMANDS_H
28
29 /**
30  * The inferred type of a scan_command_s structure, indicating whether
31  * the command has the host scan in from the device, the host scan out
32  * to the device, or both.
33  */
34 enum scan_type {
35         /// From device to host,
36         SCAN_IN = 1,
37         /// From host to device,
38         SCAN_OUT = 2,
39         /// Full-duplex scan.
40         SCAN_IO = 3
41 };
42
43 /**
44  * The scan_command provide a means of encapsulating a set of scan_field_s
45  * structures that should be scanned in/out to the device.
46  */
47 struct scan_command {
48         /// instruction/not data scan
49         bool ir_scan;
50         /// number of fields in *fields array
51         int num_fields;
52         /// pointer to an array of data scan fields
53         struct scan_field* fields;
54         /// state in which JTAG commands should finish
55         tap_state_t end_state;
56 };
57
58 struct statemove_command {
59         /// state in which JTAG commands should finish
60         tap_state_t end_state;
61 };
62
63 struct pathmove_command {
64         /// number of states in *path
65         int num_states;
66         /// states that have to be passed
67         tap_state_t* path;
68 };
69
70 struct runtest_command {
71         /// number of cycles to spend in Run-Test/Idle state
72         int num_cycles;
73         /// state in which JTAG commands should finish
74         tap_state_t end_state;
75 };
76
77
78 struct stableclocks_command {
79         /// number of clock cycles that should be sent
80         int num_cycles;
81 };
82
83
84 struct reset_command {
85         /// Set TRST output: 0 = deassert, 1 = assert, -1 = no change
86         int trst;
87         /// Set SRST output: 0 = deassert, 1 = assert, -1 = no change
88         int srst;
89 };
90
91 struct end_state_command {
92         /// state in which JTAG commands should finish
93         tap_state_t end_state;
94 };
95
96 struct sleep_command {
97         /// number of microseconds to sleep
98         uint32_t us;
99 };
100
101 /**
102  * Encapsulates a series of bits to be clocked out, affecting state
103  * and mode of the interface.
104  *
105  * In JTAG mode these are clocked out on TMS, using TCK.  They may be
106  * used for link resets, transitioning between JTAG and SWD modes, or
107  * to implement JTAG state machine transitions (implementing pathmove
108  * or statemove operations).
109  *
110  * In SWD mode these are clocked out on SWDIO, using SWCLK, and are
111  * used for link resets and transitioning between SWD and JTAG modes.
112  */
113 struct tms_command {
114         /** How many bits should be clocked out. */
115         unsigned        num_bits;
116         /** The bits to clock out; the LSB is bit 0 of bits[0].  */
117         const uint8_t           *bits;
118 };
119
120 /**
121  * Defines a container type that hold a pointer to a JTAG command
122  * structure of any defined type.
123  */
124 union jtag_command_container {
125         struct scan_command             *scan;
126         struct statemove_command        *statemove;
127         struct pathmove_command         *pathmove;
128         struct runtest_command          *runtest;
129         struct stableclocks_command     *stableclocks;
130         struct reset_command            *reset;
131         struct end_state_command        *end_state;
132         struct sleep_command            *sleep;
133         struct tms_command              *tms;
134 };
135
136 /**
137  * The type of the @c jtag_command_container contained by a
138  * @c jtag_command_s structure.
139  */
140 enum jtag_command_type {
141         JTAG_SCAN         = 1,
142         JTAG_STATEMOVE    = 2,
143         JTAG_RUNTEST      = 3,
144         JTAG_RESET        = 4,
145         JTAG_PATHMOVE     = 6,
146         JTAG_SLEEP        = 7,
147         JTAG_STABLECLOCKS = 8,
148         JTAG_TMS          = 9,
149 };
150
151 struct jtag_command {
152         union jtag_command_container cmd;
153         enum jtag_command_type   type;
154         struct jtag_command *next;
155 };
156
157 /// The current queue of jtag_command_s structures.
158 extern struct jtag_command* jtag_command_queue;
159
160 void* cmd_queue_alloc(size_t size);
161 void cmd_queue_free(void);
162
163 void jtag_queue_command(struct jtag_command *cmd);
164 void jtag_command_queue_reset(void);
165
166 enum scan_type jtag_scan_type(const struct scan_command* cmd);
167 int jtag_scan_size(const struct scan_command* cmd);
168 int jtag_read_buffer(uint8_t* buffer, const struct scan_command* cmd);
169 int jtag_build_buffer(const struct scan_command* cmd, uint8_t** buffer);
170
171 #endif // JTAG_COMMANDS_H