git.sur5r.net Git - openocd/blob - src/jtag/drivers/buspirate.c

   1 /***************************************************************************
   2  *   Copyright (C) 2010 by Michal Demin                                    *
   3  *   based on usbprog.c and arm-jtag-ew.c                                  *
   4  *                                                                         *
   5  *   This program is free software; you can redistribute it and/or modify  *
   6  *   it under the terms of the GNU General Public License as published by  *
   7  *   the Free Software Foundation; either version 2 of the License, or     *
   8  *   (at your option) any later version.                                   *
   9  *                                                                         *
  10  *   This program is distributed in the hope that it will be useful,       *
  11  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  12  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  13  *   GNU General Public License for more details.                          *
  14  *                                                                         *
  15  *   You should have received a copy of the GNU General Public License     *
  16  *   along with this program; if not, write to the                         *
  17  *   Free Software Foundation, Inc.,                                       *
  18  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  19  ***************************************************************************/
  20
  21 #ifdef HAVE_CONFIG_H
  22 #include "config.h"
  23 #endif
  24
  25 #include <jtag/interface.h>
  26 #include <jtag/commands.h>
  27
  28 #include <termios.h>
  29 #include <fcntl.h>
  30 #include <sys/ioctl.h>
  31
  32 #undef DEBUG_SERIAL
  33 /*#define DEBUG_SERIAL */
  34 static int buspirate_execute_queue(void);
  35 static int buspirate_speed(int speed);
  36 static int buspirate_khz(int khz, int *jtag_speed);
  37 static int buspirate_init(void);
  38 static int buspirate_quit(void);
  39
  40 static void buspirate_end_state(tap_state_t state);
  41 static void buspirate_state_move(void);
  42 static void buspirate_path_move(int num_states, tap_state_t *path);
  43 static void buspirate_runtest(int num_cycles);
  44 static void buspirate_scan(bool ir_scan, enum scan_type type,
  45         uint8_t *buffer, int scan_size, struct scan_command *command);
  46
  47
  48 #define CMD_UNKNOWN       0x00
  49 #define CMD_PORT_MODE     0x01
  50 #define CMD_FEATURE       0x02
  51 #define CMD_READ_ADCS     0x03
  52 /*#define CMD_TAP_SHIFT     0x04 // old protocol */
  53 #define CMD_TAP_SHIFT     0x05
  54 #define CMD_ENTER_OOCD    0x06
  55 #define CMD_UART_SPEED    0x07
  56 #define CMD_JTAG_SPEED    0x08
  57
  58 enum {
  59         MODE_HIZ = 0,
  60         MODE_JTAG = 1,          /* push-pull outputs */
  61         MODE_JTAG_OD = 2,       /* open-drain outputs */
  62 };
  63
  64 enum {
  65         FEATURE_LED = 0x01,
  66         FEATURE_VREG = 0x02,
  67         FEATURE_TRST = 0x04,
  68         FEATURE_SRST = 0x08,
  69         FEATURE_PULLUP = 0x10
  70 };
  71
  72 enum {
  73         ACTION_DISABLE = 0,
  74         ACTION_ENABLE = 1
  75 };
  76
  77 enum {
  78         SERIAL_NORMAL = 0,
  79         SERIAL_FAST = 1
  80 };
  81
  82
  83 static int buspirate_fd = -1;
  84 static int buspirate_pinmode = MODE_JTAG_OD;
  85 static int buspirate_baudrate = SERIAL_NORMAL;
  86 static int buspirate_vreg;
  87 static int buspirate_pullup;
  88 static char *buspirate_port;
  89
  90
  91 /* TAP interface */
  92 static void buspirate_tap_init(void);
  93 static int buspirate_tap_execute(void);
  94 static void buspirate_tap_append(int tms, int tdi);
  95 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
  96                 struct scan_command *command);
  97 static void buspirate_tap_make_space(int scan, int bits);
  98
  99 static void buspirate_reset(int trst, int srst);
 100
 101 /* low level interface */
 102 static void buspirate_jtag_reset(int);
 103 static void buspirate_jtag_enable(int);
 104 static unsigned char buspirate_jtag_command(int, char *, int);
 105 static void buspirate_jtag_set_speed(int, char);
 106 static void buspirate_jtag_set_mode(int, char);
 107 static void buspirate_jtag_set_feature(int, char, char);
 108 static void buspirate_jtag_get_adcs(int);
 109
 110 /* low level HW communication interface */
 111 static int buspirate_serial_open(char *port);
 112 static int buspirate_serial_setspeed(int fd, char speed);
 113 static int buspirate_serial_write(int fd, char *buf, int size);
 114 static int buspirate_serial_read(int fd, char *buf, int size);
 115 static void buspirate_serial_close(int fd);
 116 static void buspirate_print_buffer(char *buf, int size);
 117
 118 static int buspirate_speed(int speed)
 119 {
 120         /* TODO */
 121         LOG_INFO("Want to set speed to %dkHz, but not implemented yet", speed);
 122         return ERROR_OK;
 123 }
 124
 125 static int buspirate_khz(int khz, int *jtag_speed)
 126 {
 127         *jtag_speed = khz;
 128         return ERROR_OK;
 129 }
 130
 131 static int buspirate_execute_queue(void)
 132 {
 133         /* currently processed command */
 134         struct jtag_command *cmd = jtag_command_queue;
 135         int scan_size;
 136         enum scan_type type;
 137         uint8_t *buffer;
 138
 139         while (cmd) {
 140                 switch (cmd->type) {
 141                 case JTAG_RUNTEST:
 142                         DEBUG_JTAG_IO("runtest %i cycles, end in %s",
 143                                 cmd->cmd.runtest->num_cycles,
 144                                 tap_state_name(cmd->cmd.runtest
 145                                         ->end_state));
 146                         buspirate_end_state(cmd->cmd.runtest
 147                                         ->end_state);
 148                         buspirate_runtest(cmd->cmd.runtest
 149                                         ->num_cycles);
 150                         break;
 151                 case JTAG_TLR_RESET:
 152                         DEBUG_JTAG_IO("statemove end in %s",
 153                                 tap_state_name(cmd->cmd.statemove
 154                                                 ->end_state));
 155                         buspirate_end_state(cmd->cmd.statemove
 156                                         ->end_state);
 157                         buspirate_state_move();
 158                         break;
 159                 case JTAG_PATHMOVE:
 160                         DEBUG_JTAG_IO("pathmove: %i states, end in %s",
 161                                 cmd->cmd.pathmove->num_states,
 162                                 tap_state_name(cmd->cmd.pathmove
 163                                         ->path[cmd->cmd.pathmove
 164                                                 ->num_states - 1]));
 165                         buspirate_path_move(cmd->cmd.pathmove
 166                                         ->num_states,
 167                                         cmd->cmd.pathmove->path);
 168                         break;
 169                 case JTAG_SCAN:
 170                         DEBUG_JTAG_IO("scan end in %s",
 171                                 tap_state_name(cmd->cmd.scan
 172                                         ->end_state));
 173
 174                         buspirate_end_state(cmd->cmd.scan
 175                                         ->end_state);
 176
 177                         scan_size = jtag_build_buffer(cmd->cmd.scan,
 178                                         &buffer);
 179                         type = jtag_scan_type(cmd->cmd.scan);
 180                         buspirate_scan(cmd->cmd.scan->ir_scan, type,
 181                                 buffer, scan_size, cmd->cmd.scan);
 182
 183                         break;
 184                 case JTAG_RESET:
 185                         DEBUG_JTAG_IO("reset trst: %i srst %i",
 186                                 cmd->cmd.reset->trst, cmd->cmd.reset->srst);
 187
 188                         /* flush buffers, so we can reset */
 189                         buspirate_tap_execute();
 190
 191                         if (cmd->cmd.reset->trst == 1)
 192                                 tap_set_state(TAP_RESET);
 193                         buspirate_reset(cmd->cmd.reset->trst,
 194                                         cmd->cmd.reset->srst);
 195                         break;
 196                 case JTAG_SLEEP:
 197                         DEBUG_JTAG_IO("sleep %i", cmd->cmd.sleep->us);
 198                         buspirate_tap_execute();
 199                         jtag_sleep(cmd->cmd.sleep->us);
 200                                 break;
 201                 default:
 202                         LOG_ERROR("BUG: unknown JTAG command type encountered");
 203                         exit(-1);
 204                 }
 205
 206                 cmd = cmd->next;
 207         }
 208
 209         return buspirate_tap_execute();
 210 }
 211
 212 static int buspirate_init(void)
 213 {
 214         if (buspirate_port == NULL) {
 215                 LOG_ERROR("You need to specify port !");
 216                 return ERROR_JTAG_INIT_FAILED;
 217         }
 218
 219         buspirate_fd = buspirate_serial_open(buspirate_port);
 220         if (buspirate_fd == -1) {
 221                 LOG_ERROR("Could not open serial port.");
 222                 return ERROR_JTAG_INIT_FAILED;
 223         }
 224
 225         buspirate_serial_setspeed(buspirate_fd, SERIAL_NORMAL);
 226
 227         buspirate_jtag_enable(buspirate_fd);
 228
 229         if (buspirate_baudrate != SERIAL_NORMAL)
 230                 buspirate_jtag_set_speed(buspirate_fd, SERIAL_FAST);
 231
 232         LOG_INFO("Buspirate Interface ready!");
 233
 234         buspirate_tap_init();
 235         buspirate_jtag_set_mode(buspirate_fd, buspirate_pinmode);
 236         buspirate_jtag_set_feature(buspirate_fd, FEATURE_VREG,
 237                 (buspirate_vreg == 1) ? ACTION_ENABLE : ACTION_DISABLE);
 238         buspirate_jtag_set_feature(buspirate_fd, FEATURE_PULLUP,
 239                 (buspirate_pullup == 1) ? ACTION_ENABLE : ACTION_DISABLE);
 240         buspirate_reset(0, 0);
 241
 242         return ERROR_OK;
 243 }
 244
 245 static int buspirate_quit(void)
 246 {
 247         LOG_INFO("Shuting down buspirate ");
 248         buspirate_jtag_set_mode(buspirate_fd, MODE_HIZ);
 249
 250         buspirate_jtag_set_speed(buspirate_fd, SERIAL_NORMAL);
 251         buspirate_jtag_reset(buspirate_fd);
 252
 253         buspirate_serial_close(buspirate_fd);
 254
 255         if (buspirate_port) {
 256                 free(buspirate_port);
 257                 buspirate_port = NULL;
 258         }
 259         return ERROR_OK;
 260 }
 261
 262 /* openocd command interface */
 263 COMMAND_HANDLER(buspirate_handle_adc_command)
 264 {
 265         if (buspirate_fd == -1)
 266                 return ERROR_OK;
 267
 268         /* send the command */
 269         buspirate_jtag_get_adcs(buspirate_fd);
 270
 271         return ERROR_OK;
 272
 273 }
 274
 275 COMMAND_HANDLER(buspirate_handle_vreg_command)
 276 {
 277         if (CMD_ARGC < 1) {
 278                 LOG_ERROR("usage: buspirate_vreg <1|0>");
 279                 return ERROR_OK;
 280         }
 281
 282         if (atoi(CMD_ARGV[0]) == 1)
 283                 buspirate_vreg = 1;
 284         else if (atoi(CMD_ARGV[0]) == 0)
 285                 buspirate_vreg = 0;
 286         else
 287                 LOG_ERROR("usage: buspirate_vreg <1|0>");
 288
 289         return ERROR_OK;
 290
 291 }
 292
 293 COMMAND_HANDLER(buspirate_handle_pullup_command)
 294 {
 295         if (CMD_ARGC < 1) {
 296                 LOG_ERROR("usage: buspirate_pullup <1|0>");
 297                 return ERROR_OK;
 298         }
 299
 300         if (atoi(CMD_ARGV[0]) == 1)
 301                 buspirate_pullup = 1;
 302         else if (atoi(CMD_ARGV[0]) == 0)
 303                 buspirate_pullup = 0;
 304         else
 305                 LOG_ERROR("usage: buspirate_pullup <1|0>");
 306
 307         return ERROR_OK;
 308
 309 }
 310
 311 COMMAND_HANDLER(buspirate_handle_led_command)
 312 {
 313         if (CMD_ARGC < 1) {
 314                 LOG_ERROR("usage: buspirate_led <1|0>");
 315                 return ERROR_OK;
 316         }
 317
 318         if (atoi(CMD_ARGV[0]) == 1) {
 319                 /* enable led */
 320                 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
 321                                 ACTION_ENABLE);
 322         } else if (atoi(CMD_ARGV[0]) == 0) {
 323                 /* disable led */
 324                 buspirate_jtag_set_feature(buspirate_fd, FEATURE_LED,
 325                                 ACTION_DISABLE);
 326         } else {
 327                 LOG_ERROR("usage: buspirate_led <1|0>");
 328         }
 329
 330         return ERROR_OK;
 331
 332 }
 333
 334 COMMAND_HANDLER(buspirate_handle_mode_command)
 335 {
 336         if (CMD_ARGC < 1) {
 337                 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
 338                 return ERROR_OK;
 339         }
 340
 341         if (CMD_ARGV[0][0] == 'n')
 342                 buspirate_pinmode = MODE_JTAG;
 343         else if (CMD_ARGV[0][0] == 'o')
 344                 buspirate_pinmode = MODE_JTAG_OD;
 345         else
 346                 LOG_ERROR("usage: buspirate_mode <normal|open-drain>");
 347
 348         return ERROR_OK;
 349
 350 }
 351
 352 COMMAND_HANDLER(buspirate_handle_speed_command)
 353 {
 354         if (CMD_ARGC < 1) {
 355                 LOG_ERROR("usage: buspirate_speed <normal|fast>");
 356                 return ERROR_OK;
 357         }
 358
 359         if (CMD_ARGV[0][0] == 'n')
 360                 buspirate_baudrate = SERIAL_NORMAL;
 361         else if (CMD_ARGV[0][0] == 'f')
 362                 buspirate_baudrate = SERIAL_FAST;
 363         else
 364                 LOG_ERROR("usage: buspirate_speed <normal|fast>");
 365
 366         return ERROR_OK;
 367
 368 }
 369
 370 COMMAND_HANDLER(buspirate_handle_port_command)
 371 {
 372         if (CMD_ARGC < 1) {
 373                 LOG_ERROR("usage: buspirate_port /dev/ttyUSB0");
 374                 return ERROR_OK;
 375         }
 376
 377         if (buspirate_port == NULL)
 378                 buspirate_port = strdup(CMD_ARGV[0]);
 379
 380         return ERROR_OK;
 381
 382 }
 383
 384 static const struct command_registration buspirate_command_handlers[] = {
 385         {
 386                 .name = "buspirate_adc",
 387                 .handler = &buspirate_handle_adc_command,
 388                 .mode = COMMAND_EXEC,
 389                 .help = "reads voltages on adc pins",
 390         },
 391         {
 392                 .name = "buspirate_vreg",
 393                 .handler = &buspirate_handle_vreg_command,
 394                 .mode = COMMAND_CONFIG,
 395                 .help = "changes the state of voltage regulators",
 396         },
 397         {
 398                 .name = "buspirate_pullup",
 399                 .handler = &buspirate_handle_pullup_command,
 400                 .mode = COMMAND_CONFIG,
 401                 .help = "changes the state of pullup",
 402         },
 403         {
 404                 .name = "buspirate_led",
 405                 .handler = &buspirate_handle_led_command,
 406                 .mode = COMMAND_EXEC,
 407                 .help = "changes the state of led",
 408         },
 409         {
 410                 .name = "buspirate_speed",
 411                 .handler = &buspirate_handle_speed_command,
 412                 .mode = COMMAND_CONFIG,
 413                 .help = "speed of the interface",
 414         },
 415         {
 416                 .name = "buspirate_mode",
 417                 .handler = &buspirate_handle_mode_command,
 418                 .mode = COMMAND_CONFIG,
 419                 .help = "pin mode of the interface",
 420         },
 421         {
 422                 .name = "buspirate_port",
 423                 .handler = &buspirate_handle_port_command,
 424                 .mode = COMMAND_CONFIG,
 425                 .help = "name of the serial port to open",
 426         },
 427         COMMAND_REGISTRATION_DONE
 428 };
 429
 430 struct jtag_interface buspirate_interface = {
 431         .name = "buspirate",
 432         .execute_queue = buspirate_execute_queue,
 433         .speed = buspirate_speed,
 434         .khz = buspirate_khz,
 435         .commands = buspirate_command_handlers,
 436         .init = buspirate_init,
 437         .quit = buspirate_quit
 438 };
 439
 440 /*************** jtag execute commands **********************/
 441 static void buspirate_end_state(tap_state_t state)
 442 {
 443         if (tap_is_state_stable(state))
 444                 tap_set_end_state(state);
 445         else {
 446                 LOG_ERROR("BUG: %i is not a valid end state", state);
 447                 exit(-1);
 448         }
 449 }
 450
 451 static void buspirate_state_move(void)
 452 {
 453         int i = 0, tms = 0;
 454         uint8_t tms_scan = tap_get_tms_path(tap_get_state(),
 455                         tap_get_end_state());
 456         int tms_count = tap_get_tms_path_len(tap_get_state(),
 457                         tap_get_end_state());
 458
 459         for (i = 0; i < tms_count; i++) {
 460                 tms = (tms_scan >> i) & 1;
 461                 buspirate_tap_append(tms, 0);
 462         }
 463
 464         tap_set_state(tap_get_end_state());
 465 }
 466
 467 static void buspirate_path_move(int num_states, tap_state_t *path)
 468 {
 469         int i;
 470
 471         for (i = 0; i < num_states; i++) {
 472                 if (tap_state_transition(tap_get_state(), false) == path[i]) {
 473                         buspirate_tap_append(0, 0);
 474                 } else if (tap_state_transition(tap_get_state(), true)
 475                                 == path[i]) {
 476                         buspirate_tap_append(1, 0);
 477                 } else {
 478                         LOG_ERROR("BUG: %s -> %s isn't a valid "
 479                                 "TAP transition",
 480                                 tap_state_name(tap_get_state()),
 481                                 tap_state_name(path[i]));
 482                         exit(-1);
 483                 }
 484
 485                 tap_set_state(path[i]);
 486         }
 487
 488         tap_set_end_state(tap_get_state());
 489 }
 490
 491 static void buspirate_runtest(int num_cycles)
 492 {
 493         int i;
 494
 495         tap_state_t saved_end_state = tap_get_end_state();
 496
 497         /* only do a state_move when we're not already in IDLE */
 498         if (tap_get_state() != TAP_IDLE) {
 499                 buspirate_end_state(TAP_IDLE);
 500                 buspirate_state_move();
 501         }
 502
 503         for (i = 0; i < num_cycles; i++)
 504                 buspirate_tap_append(0, 0);
 505
 506         DEBUG_JTAG_IO("runtest: cur_state %s end_state %s",
 507                         tap_state_name(tap_get_state()),
 508                         tap_state_name(tap_get_end_state()));
 509
 510         /* finish in end_state */
 511         buspirate_end_state(saved_end_state);
 512         if (tap_get_state() != tap_get_end_state())
 513                 buspirate_state_move();
 514 }
 515
 516 static void buspirate_scan(bool ir_scan, enum scan_type type,
 517         uint8_t *buffer, int scan_size, struct scan_command *command)
 518 {
 519         tap_state_t saved_end_state;
 520
 521         buspirate_tap_make_space(1, scan_size+8);
 522         /* is 8 correct ? (2 moves = 16) */
 523
 524         saved_end_state = tap_get_end_state();
 525
 526         buspirate_end_state(ir_scan ? TAP_IRSHIFT : TAP_DRSHIFT);
 527         buspirate_state_move();
 528
 529         buspirate_tap_append_scan(scan_size, buffer, command);
 530
 531         /* move to PAUSE */
 532         buspirate_tap_append(0, 0);
 533
 534         /* restore the saved state */
 535         buspirate_end_state(saved_end_state);
 536         tap_set_state(ir_scan ? TAP_IRPAUSE : TAP_DRPAUSE);
 537
 538         if (tap_get_state() != tap_get_end_state())
 539                 buspirate_state_move();
 540 }
 541
 542
 543 /************************* TAP related stuff **********/
 544
 545 #define BUSPIRATE_BUFFER_SIZE 1024
 546 #define BUSPIRATE_MAX_PENDING_SCANS 32
 547
 548 static char tms_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
 549 static char tdi_chain[BUSPIRATE_BUFFER_SIZE]; /* send */
 550 static int tap_chain_index;
 551
 552 struct pending_scan_result /* this was stolen from arm-jtag-ew */
 553 {
 554         int first; /* First bit position in tdo_buffer to read */
 555         int length; /* Number of bits to read */
 556         struct scan_command *command; /* Corresponding scan command */
 557         uint8_t *buffer;
 558 };
 559
 560 static struct pending_scan_result
 561 tap_pending_scans[BUSPIRATE_MAX_PENDING_SCANS];
 562 static int tap_pending_scans_num;
 563
 564 static void buspirate_tap_init(void)
 565 {
 566         tap_chain_index = 0;
 567         tap_pending_scans_num = 0;
 568 }
 569
 570 static int buspirate_tap_execute(void)
 571 {
 572         char tmp[4096];
 573         uint8_t *in_buf;
 574         int i;
 575         int fill_index = 0;
 576         int ret;
 577         int bytes_to_send;
 578
 579         if (tap_chain_index <= 0)
 580                 return ERROR_OK;
 581
 582         LOG_DEBUG("executing tap num bits = %i scans = %i",
 583                         tap_chain_index, tap_pending_scans_num);
 584
 585         bytes_to_send = (tap_chain_index+7) / 8;
 586
 587         tmp[0] = CMD_TAP_SHIFT; /* this command expects number of bits */
 588         tmp[1] = (char)(tap_chain_index >> 8);  /* high */
 589         tmp[2] = (char)(tap_chain_index);  /* low */
 590
 591         fill_index = 3;
 592         for (i = 0; i < bytes_to_send; i++) {
 593                 tmp[fill_index] = tdi_chain[i];
 594                 fill_index++;
 595                 tmp[fill_index] = tms_chain[i];
 596                 fill_index++;
 597         }
 598
 599         ret = buspirate_serial_write(buspirate_fd, tmp, 3 + bytes_to_send*2);
 600         if (ret != bytes_to_send*2+3) {
 601                 LOG_ERROR("error writing :(");
 602                 return ERROR_JTAG_DEVICE_ERROR;
 603         }
 604
 605         ret = buspirate_serial_read(buspirate_fd, tmp, bytes_to_send + 3);
 606         in_buf = (uint8_t *)(&tmp[3]);
 607
 608         /* parse the scans */
 609         for (i = 0; i < tap_pending_scans_num; i++) {
 610                 uint8_t *buffer = tap_pending_scans[i].buffer;
 611                 int length = tap_pending_scans[i].length;
 612                 int first = tap_pending_scans[i].first;
 613                 struct scan_command *command = tap_pending_scans[i].command;
 614
 615                 /* copy bits from buffer */
 616                 buf_set_buf(in_buf, first, buffer, 0, length);
 617
 618                 /* return buffer to higher level */
 619                 if (jtag_read_buffer(buffer, command) != ERROR_OK) {
 620                         buspirate_tap_init();
 621                         return ERROR_JTAG_QUEUE_FAILED;
 622                 }
 623
 624                 free(buffer);
 625         }
 626         tap_pending_scans_num = 0;
 627         tap_chain_index = 0;
 628         return ERROR_OK;
 629 }
 630
 631 static void buspirate_tap_make_space(int scans, int bits)
 632 {
 633         int have_scans = BUSPIRATE_MAX_PENDING_SCANS - tap_pending_scans_num;
 634         int have_bits = BUSPIRATE_BUFFER_SIZE * 8 - tap_chain_index;
 635
 636         if ((have_scans < scans) || (have_bits < bits))
 637                 buspirate_tap_execute();
 638 }
 639
 640 static void buspirate_tap_append(int tms, int tdi)
 641 {
 642         int chain_index;
 643
 644         buspirate_tap_make_space(0, 1);
 645         chain_index = tap_chain_index / 8;
 646
 647         if (chain_index < BUSPIRATE_BUFFER_SIZE) {
 648                 int bit_index = tap_chain_index % 8;
 649                 uint8_t bit = 1 << bit_index;
 650
 651                 if (tms)
 652                         tms_chain[chain_index] |= bit;
 653                 else
 654                         tms_chain[chain_index] &= ~bit;
 655
 656                 if (tdi)
 657                         tdi_chain[chain_index] |= bit;
 658                 else
 659                         tdi_chain[chain_index] &= ~bit;
 660
 661                 tap_chain_index++;
 662         } else
 663                 LOG_ERROR("tap_chain overflow, Bad things will happen");
 664
 665 }
 666
 667 static void buspirate_tap_append_scan(int length, uint8_t *buffer,
 668                 struct scan_command *command)
 669 {
 670         int i;
 671         tap_pending_scans[tap_pending_scans_num].length = length;
 672         tap_pending_scans[tap_pending_scans_num].buffer = buffer;
 673         tap_pending_scans[tap_pending_scans_num].command = command;
 674         tap_pending_scans[tap_pending_scans_num].first = tap_chain_index;
 675
 676         for (i = 0; i < length; i++) {
 677                 int tms = (i < length-1 ? 0 : 1);
 678                 int tdi = (buffer[i/8] >> (i%8)) & 1;
 679                 buspirate_tap_append(tms, tdi);
 680         }
 681         tap_pending_scans_num++;
 682 }
 683
 684 /*************** jtag wrapper functions *********************/
 685
 686 /* (1) assert or (0) deassert reset lines */
 687 static void buspirate_reset(int trst, int srst)
 688 {
 689         LOG_DEBUG("trst: %i, srst: %i", trst, srst);
 690
 691         if (trst)
 692                 buspirate_jtag_set_feature(buspirate_fd,
 693                                 FEATURE_TRST, ACTION_DISABLE);
 694         else
 695                 buspirate_jtag_set_feature(buspirate_fd,
 696                                 FEATURE_TRST, ACTION_ENABLE);
 697
 698         if (srst)
 699                 buspirate_jtag_set_feature(buspirate_fd,
 700                                 FEATURE_SRST, ACTION_DISABLE);
 701         else
 702                 buspirate_jtag_set_feature(buspirate_fd,
 703                                 FEATURE_SRST, ACTION_ENABLE);
 704 }
 705
 706 /*************** jtag lowlevel functions ********************/
 707 static void buspirate_jtag_enable(int fd)
 708 {
 709         int ret;
 710         char tmp[21] = { [0 ... 20] = 0x00 };
 711         int done = 0;
 712         int cmd_sent = 0;
 713
 714         LOG_DEBUG("Entering binary mode");
 715         buspirate_serial_write(fd, tmp, 20);
 716         usleep(10000);
 717
 718         /* reads 1 to n "BBIO1"s and one "OCD1" */
 719         while (!done) {
 720                 ret = buspirate_serial_read(fd, tmp, 4);
 721                 if (ret != 4) {
 722                         LOG_ERROR("Buspirate error. Is is binary/"
 723                                 "/OpenOCD support enabled?");
 724                         exit(-1);
 725                 }
 726                 if (strncmp(tmp, "BBIO", 4) == 0) {
 727                         ret = buspirate_serial_read(fd, tmp, 1);
 728                         if (ret != 1) {
 729                                 LOG_ERROR("Buspirate did not correctly! "
 730                                         "Do you have correct firmware?");
 731                                 exit(-1);
 732                         }
 733                         if (tmp[0] != '1') {
 734                                 LOG_ERROR("Unsupported binary protocol ");
 735                                 exit(-1);
 736                         }
 737                         if (cmd_sent == 0) {
 738                                 cmd_sent = 1;
 739                                 tmp[0] = CMD_ENTER_OOCD;
 740                                 ret = buspirate_serial_write(fd, tmp, 1);
 741                         }
 742                 } else if (strncmp(tmp, "OCD1", 4) == 0)
 743                         done = 1;
 744                 else {
 745                         LOG_ERROR("Buspirate did not correctly! "
 746                                 "Do you have correct firmware?");
 747                         exit(-1);
 748                 }
 749         }
 750
 751 }
 752
 753 static void buspirate_jtag_reset(int fd)
 754 {
 755         int ret;
 756         char tmp[5];
 757
 758         tmp[0] = 0x00; /* exit OCD1 mode */
 759         buspirate_serial_write(fd, tmp, 1);
 760         usleep(10000);
 761         ret = buspirate_serial_read(fd, tmp, 5);
 762         if (strncmp(tmp, "BBIO1", 5) == 0) {
 763                 tmp[0] = 0x0F; /*  reset BP */
 764                 buspirate_serial_write(fd, tmp, 1);
 765         } else
 766                 LOG_ERROR("Unable to restart buspirate!");
 767 }
 768
 769 static void buspirate_jtag_set_speed(int fd, char speed)
 770 {
 771         int ret;
 772         char tmp[2];
 773         char ack[2];
 774
 775         ack[0] = 0xAA;
 776         ack[1] = 0x55;
 777
 778         tmp[0] = CMD_UART_SPEED;
 779         tmp[1] = speed;
 780         buspirate_jtag_command(fd, tmp, 2);
 781
 782         /* here the adapter changes speed, we need follow */
 783         buspirate_serial_setspeed(fd, speed);
 784
 785         buspirate_serial_write(fd, ack, 2);
 786         ret = buspirate_serial_read(fd, tmp, 2);
 787         if (ret != 2) {
 788                 LOG_ERROR("Buspirate did not ack speed change");
 789                 exit(-1);
 790         }
 791         if ((tmp[0] != CMD_UART_SPEED) || (tmp[1] != speed)) {
 792                 LOG_ERROR("Buspirate didn't reply as expected");
 793                 exit(-1);
 794         }
 795         LOG_INFO("Buspirate switched to %s mode",
 796                 (speed == SERIAL_NORMAL) ? "normal" : "FAST");
 797 }
 798
 799
 800 static void buspirate_jtag_set_mode(int fd, char mode)
 801 {
 802         char tmp[2];
 803         tmp[0] = CMD_PORT_MODE;
 804         tmp[1] = mode;
 805         buspirate_jtag_command(fd, tmp, 2);
 806 }
 807
 808 static void buspirate_jtag_set_feature(int fd, char feat, char action)
 809 {
 810         char tmp[3];
 811         tmp[0] = CMD_FEATURE;
 812         tmp[1] = feat;   /* what */
 813         tmp[2] = action; /* action */
 814         buspirate_jtag_command(fd, tmp, 3);
 815 }
 816
 817 static void buspirate_jtag_get_adcs(int fd)
 818 {
 819         uint8_t tmp[10];
 820         uint16_t a, b, c, d;
 821         tmp[0] = CMD_READ_ADCS;
 822         buspirate_jtag_command(fd, (char *)tmp, 1);
 823         a = tmp[2] << 8 | tmp[3];
 824         b = tmp[4] << 8 | tmp[5];
 825         c = tmp[6] << 8 | tmp[7];
 826         d = tmp[8] << 8 | tmp[9];
 827
 828         LOG_INFO("ADC: ADC_Pin = %.02f VPullup = %.02f V33 = %.02f "
 829                 "V50 = %.02f",
 830                 ((float)a)/155.1515, ((float)b)/155.1515,
 831                 ((float)c)/155.1515, ((float)d)/155.1515);
 832 }
 833
 834 static unsigned char buspirate_jtag_command(int fd,
 835                 char *cmd, int cmdlen)
 836 {
 837         int res;
 838         int len = 0;
 839
 840         res = buspirate_serial_write(fd, cmd, cmdlen);
 841
 842         if ((cmd[0] == CMD_UART_SPEED)
 843                                 || (cmd[0] == CMD_PORT_MODE)
 844                                 || (cmd[0] == CMD_FEATURE)
 845                                 || (cmd[0] == CMD_JTAG_SPEED))
 846                 return 1;
 847
 848         if (res == cmdlen) {
 849                 switch (cmd[0]) {
 850                 case CMD_READ_ADCS:
 851                         len = 10; /* 2*sizeof(char)+4*sizeof(uint16_t) */
 852                         break;
 853                 case CMD_TAP_SHIFT:
 854                         len = cmdlen;
 855                         break;
 856                 default:
 857                         LOG_INFO("Wrong !");
 858                 }
 859                 res =  buspirate_serial_read(fd, cmd, len);
 860                 if (res > 0)
 861                         return (unsigned char)cmd[1];
 862                 else
 863                         return -1;
 864         } else
 865                 return -1;
 866         return 0;
 867 }
 868
 869 /* low level serial port */
 870 /* TODO add support for WIN32 and others ! */
 871 static int buspirate_serial_open(char *port)
 872 {
 873         int fd;
 874         fd = open(buspirate_port, O_RDWR | O_NOCTTY | O_NDELAY);
 875         return fd;
 876 }
 877
 878 static int buspirate_serial_setspeed(int fd, char speed)
 879 {
 880         struct termios t_opt;
 881         speed_t baud = (speed == SERIAL_FAST) ? B1000000 : B115200;
 882
 883         /* set the serial port parameters */
 884         fcntl(fd, F_SETFL, 0);
 885         tcgetattr(fd, &t_opt);
 886         cfsetispeed(&t_opt, baud);
 887         cfsetospeed(&t_opt, baud);
 888         t_opt.c_cflag |= (CLOCAL | CREAD);
 889         t_opt.c_cflag &= ~PARENB;
 890         t_opt.c_cflag &= ~CSTOPB;
 891         t_opt.c_cflag &= ~CSIZE;
 892         t_opt.c_cflag |= CS8;
 893         t_opt.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
 894         t_opt.c_iflag &= ~(IXON | IXOFF | IXANY);
 895         t_opt.c_oflag &= ~OPOST;
 896         t_opt.c_cc[VMIN] = 0;
 897         t_opt.c_cc[VTIME] = 10;
 898         tcflush(fd, TCIFLUSH);
 899         tcsetattr(fd, TCSANOW, &t_opt);
 900
 901         return 0;
 902 }
 903
 904 static int buspirate_serial_write(int fd, char *buf, int size)
 905 {
 906         int ret = 0;
 907
 908         ret = write(fd, buf, size);
 909
 910         LOG_DEBUG("size = %d ret = %d", size, ret);
 911         buspirate_print_buffer(buf, size);
 912
 913         if (ret != size)
 914                 LOG_ERROR("Error sending data");
 915
 916         return ret;
 917 }
 918
 919 static int buspirate_serial_read(int fd, char *buf, int size)
 920 {
 921         int len = 0;
 922         int ret = 0;
 923         int timeout = 0;
 924
 925         while (len < size) {
 926                 ret = read(fd, buf+len, size-len);
 927                 if (ret == -1)
 928                         return -1;
 929
 930                 if (ret == 0) {
 931                         timeout++;
 932
 933                         if (timeout >= 10)
 934                                 break;
 935
 936                         continue;
 937                 }
 938
 939                 len += ret;
 940         }
 941
 942         LOG_DEBUG("should have read = %d actual size = %d", size, len);
 943         buspirate_print_buffer(buf, len);
 944
 945         if (len != size)
 946                 LOG_ERROR("Error reading data");
 947
 948         return len;
 949 }
 950
 951 static void buspirate_serial_close(int fd)
 952 {
 953         close(fd);
 954 }
 955
 956 #define LINE_SIZE      81
 957 #define BYTES_PER_LINE 16
 958 static void buspirate_print_buffer(char *buf, int size)
 959 {
 960         char line[LINE_SIZE];
 961         char tmp[10];
 962         int offset = 0;
 963
 964         line[0] = 0;
 965         while (offset < size) {
 966                 snprintf(tmp, 5, "%02x ", (uint8_t)buf[offset]);
 967                 offset++;
 968
 969                 strcat(line, tmp);
 970
 971                 if (offset % BYTES_PER_LINE == 0) {
 972                         LOG_DEBUG("%s", line);
 973                         line[0] = 0;
 974                 }
 975         }
 976
 977         if (line[0] != 0) {
 978                 LOG_DEBUG("%s", line);
 979         }
 980 }
 981