1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
25 #include <helper/time_support.h>
26 #include "target_type.h"
28 #include "arm_opcodes.h"
32 * For information about the ARM920T, see ARM DDI 0151C especially
33 * Chapter 9 about debug support, which shows how to manipulate each
34 * of the different scan chains:
36 * 0 ... ARM920 signals, e.g. to rest of SOC (unused here)
37 * 1 ... debugging; watchpoint and breakpoint status, etc; also
38 * MMU and cache access in conjunction with scan chain 15
40 * 3 ... external boundary scan (SoC-specific, unused here)
41 * 4 ... access to cache tag RAM
43 * 15 ... access coprocessor 15, "physical" or "interpreted" modes
44 * "interpreted" works with a few actual MRC/MCR instructions
45 * "physical" provides register-like behaviors. Section 9.6.7
46 * covers these details.
48 * The ARM922T is similar, but with smaller caches (8K each, vs 16K).
52 #define _DEBUG_INSTRUCTION_EXECUTION_
55 /* Table 9-8 shows scan chain 15 format during physical access mode, using a
56 * dedicated 6-bit address space (encoded in bits 33:38). Writes use one
57 * JTAG scan, while reads use two.
59 * Table 9-9 lists the thirteen registers which support physical access.
60 * ARM920T_CP15_PHYS_ADDR() constructs the 6-bit reg_addr parameter passed
61 * to arm920t_read_cp15_physical() and arm920t_write_cp15_physical().
67 #define ARM920T_CP15_PHYS_ADDR(x, y, z) ((x << 5) | (y << 1) << (z))
69 /* Registers supporting physical Read access (from table 9-9) */
70 #define CP15PHYS_CACHETYPE ARM920T_CP15_PHYS_ADDR(0, 0x0, 1)
71 #define CP15PHYS_ICACHE_IDX ARM920T_CP15_PHYS_ADDR(1, 0xd, 1)
72 #define CP15PHYS_DCACHE_IDX ARM920T_CP15_PHYS_ADDR(1, 0xe, 1)
73 /* NOTE: several more registers support only physical read access */
75 /* Registers supporting physical Read/Write access (from table 9-9) */
76 #define CP15PHYS_CTRL ARM920T_CP15_PHYS_ADDR(0, 0x1, 0)
77 #define CP15PHYS_PID ARM920T_CP15_PHYS_ADDR(0, 0xd, 0)
78 #define CP15PHYS_TESTSTATE ARM920T_CP15_PHYS_ADDR(0, 0xf, 0)
79 #define CP15PHYS_ICACHE ARM920T_CP15_PHYS_ADDR(1, 0x1, 1)
80 #define CP15PHYS_DCACHE ARM920T_CP15_PHYS_ADDR(1, 0x2, 1)
82 static int arm920t_read_cp15_physical(struct target *target,
83 int reg_addr, uint32_t *value)
85 struct arm920t_common *arm920t = target_to_arm920(target);
86 struct arm_jtag *jtag_info;
87 struct scan_field fields[4];
88 uint8_t access_type_buf = 1;
89 uint8_t reg_addr_buf = reg_addr & 0x3f;
92 jtag_info = &arm920t->arm7_9_common.jtag_info;
94 jtag_set_end_state(TAP_IDLE);
95 arm_jtag_scann(jtag_info, 0xf);
96 arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
98 fields[0].tap = jtag_info->tap;
99 fields[0].num_bits = 1;
100 fields[0].out_value = &access_type_buf;
101 fields[0].in_value = NULL;
103 fields[1].tap = jtag_info->tap;
104 fields[1].num_bits = 32;
105 fields[1].out_value = NULL;
106 fields[1].in_value = NULL;
108 fields[2].tap = jtag_info->tap;
109 fields[2].num_bits = 6;
110 fields[2].out_value = ®_addr_buf;
111 fields[2].in_value = NULL;
113 fields[3].tap = jtag_info->tap;
114 fields[3].num_bits = 1;
115 fields[3].out_value = &nr_w_buf;
116 fields[3].in_value = NULL;
118 jtag_add_dr_scan(4, fields, jtag_get_end_state());
120 fields[1].in_value = (uint8_t *)value;
122 jtag_add_dr_scan(4, fields, jtag_get_end_state());
124 jtag_add_callback(arm_le_to_h_u32, (jtag_callback_data_t)value);
126 #ifdef _DEBUG_INSTRUCTION_EXECUTION_
127 jtag_execute_queue();
128 LOG_DEBUG("addr: 0x%x value: %8.8x", reg_addr, *value);
134 static int arm920t_write_cp15_physical(struct target *target,
135 int reg_addr, uint32_t value)
137 struct arm920t_common *arm920t = target_to_arm920(target);
138 struct arm_jtag *jtag_info;
139 struct scan_field fields[4];
140 uint8_t access_type_buf = 1;
141 uint8_t reg_addr_buf = reg_addr & 0x3f;
142 uint8_t nr_w_buf = 1;
143 uint8_t value_buf[4];
145 jtag_info = &arm920t->arm7_9_common.jtag_info;
147 buf_set_u32(value_buf, 0, 32, value);
149 jtag_set_end_state(TAP_IDLE);
150 arm_jtag_scann(jtag_info, 0xf);
151 arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
153 fields[0].tap = jtag_info->tap;
154 fields[0].num_bits = 1;
155 fields[0].out_value = &access_type_buf;
156 fields[0].in_value = NULL;
158 fields[1].tap = jtag_info->tap;
159 fields[1].num_bits = 32;
160 fields[1].out_value = value_buf;
161 fields[1].in_value = NULL;
163 fields[2].tap = jtag_info->tap;
164 fields[2].num_bits = 6;
165 fields[2].out_value = ®_addr_buf;
166 fields[2].in_value = NULL;
168 fields[3].tap = jtag_info->tap;
169 fields[3].num_bits = 1;
170 fields[3].out_value = &nr_w_buf;
171 fields[3].in_value = NULL;
173 jtag_add_dr_scan(4, fields, jtag_get_end_state());
175 #ifdef _DEBUG_INSTRUCTION_EXECUTION_
176 LOG_DEBUG("addr: 0x%x value: %8.8x", reg_addr, value);
182 /* See table 9-10 for scan chain 15 format during interpreted access mode.
183 * If the TESTSTATE register is set for interpreted access, certain CP15
184 * MRC and MCR instructions may be executed through scan chain 15.
186 * Tables 9-11, 9-12, and 9-13 show which MRC and MCR instructions can be
187 * executed using scan chain 15 interpreted mode.
189 static int arm920t_execute_cp15(struct target *target, uint32_t cp15_opcode,
193 struct arm920t_common *arm920t = target_to_arm920(target);
194 struct arm_jtag *jtag_info;
195 struct scan_field fields[4];
196 uint8_t access_type_buf = 0; /* interpreted access */
197 uint8_t reg_addr_buf = 0x0;
198 uint8_t nr_w_buf = 0;
199 uint8_t cp15_opcode_buf[4];
201 jtag_info = &arm920t->arm7_9_common.jtag_info;
203 jtag_set_end_state(TAP_IDLE);
204 arm_jtag_scann(jtag_info, 0xf);
205 arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
207 buf_set_u32(cp15_opcode_buf, 0, 32, cp15_opcode);
209 fields[0].tap = jtag_info->tap;
210 fields[0].num_bits = 1;
211 fields[0].out_value = &access_type_buf;
212 fields[0].in_value = NULL;
214 fields[1].tap = jtag_info->tap;
215 fields[1].num_bits = 32;
216 fields[1].out_value = cp15_opcode_buf;
217 fields[1].in_value = NULL;
219 fields[2].tap = jtag_info->tap;
220 fields[2].num_bits = 6;
221 fields[2].out_value = ®_addr_buf;
222 fields[2].in_value = NULL;
224 fields[3].tap = jtag_info->tap;
225 fields[3].num_bits = 1;
226 fields[3].out_value = &nr_w_buf;
227 fields[3].in_value = NULL;
229 jtag_add_dr_scan(4, fields, jtag_get_end_state());
231 arm9tdmi_clock_out(jtag_info, arm_opcode, 0, NULL, 0);
232 arm9tdmi_clock_out(jtag_info, ARMV4_5_NOP, 0, NULL, 1);
233 retval = arm7_9_execute_sys_speed(target);
234 if (retval != ERROR_OK)
237 if ((retval = jtag_execute_queue()) != ERROR_OK)
239 LOG_ERROR("failed executing JTAG queue");
246 static int arm920t_read_cp15_interpreted(struct target *target,
247 uint32_t cp15_opcode, uint32_t address, uint32_t *value)
249 struct arm *armv4_5 = target_to_arm(target);
252 uint32_t cp15c15 = 0x0;
253 struct reg *r = armv4_5->core_cache->reg_list;
255 /* load address into R1 */
257 arm9tdmi_write_core_regs(target, 0x2, regs);
259 /* read-modify-write CP15 test state register
260 * to enable interpreted access mode */
261 arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
262 jtag_execute_queue();
263 cp15c15 |= 1; /* set interpret mode */
264 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
266 /* execute CP15 instruction and ARM load (reading from coprocessor) */
267 arm920t_execute_cp15(target, cp15_opcode, ARMV4_5_LDR(0, 1));
269 /* disable interpreted access mode */
270 cp15c15 &= ~1U; /* clear interpret mode */
271 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
273 /* retrieve value from R0 */
275 arm9tdmi_read_core_regs(target, 0x1, regs_p);
276 jtag_execute_queue();
278 #ifdef _DEBUG_INSTRUCTION_EXECUTION_
279 LOG_DEBUG("cp15_opcode: %8.8x, address: %8.8x, value: %8.8x", cp15_opcode, address, *value);
282 if (!is_arm_mode(armv4_5->core_mode))
292 int arm920t_write_cp15_interpreted(struct target *target,
293 uint32_t cp15_opcode, uint32_t value, uint32_t address)
295 uint32_t cp15c15 = 0x0;
296 struct arm *armv4_5 = target_to_arm(target);
298 struct reg *r = armv4_5->core_cache->reg_list;
300 /* load value, address into R0, R1 */
303 arm9tdmi_write_core_regs(target, 0x3, regs);
305 /* read-modify-write CP15 test state register
306 * to enable interpreted access mode */
307 arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
308 jtag_execute_queue();
309 cp15c15 |= 1; /* set interpret mode */
310 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
312 /* execute CP15 instruction and ARM store (writing to coprocessor) */
313 arm920t_execute_cp15(target, cp15_opcode, ARMV4_5_STR(0, 1));
315 /* disable interpreted access mode */
316 cp15c15 &= ~1U; /* set interpret mode */
317 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
319 #ifdef _DEBUG_INSTRUCTION_EXECUTION_
320 LOG_DEBUG("cp15_opcode: %8.8x, value: %8.8x, address: %8.8x", cp15_opcode, value, address);
323 if (!is_arm_mode(armv4_5->core_mode))
333 uint32_t arm920t_get_ttb(struct target *target)
338 if ((retval = arm920t_read_cp15_interpreted(target, 0xeebf0f51, 0x0, &ttb)) != ERROR_OK)
345 void arm920t_disable_mmu_caches(struct target *target, int mmu, int d_u_cache, int i_cache)
347 uint32_t cp15_control;
349 /* read cp15 control register */
350 arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_control);
351 jtag_execute_queue();
354 cp15_control &= ~0x1U;
357 cp15_control &= ~0x4U;
360 cp15_control &= ~0x1000U;
362 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_control);
366 void arm920t_enable_mmu_caches(struct target *target, int mmu, int d_u_cache, int i_cache)
368 uint32_t cp15_control;
370 /* read cp15 control register */
371 arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_control);
372 jtag_execute_queue();
375 cp15_control |= 0x1U;
378 cp15_control |= 0x4U;
381 cp15_control |= 0x1000U;
383 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_control);
387 void arm920t_post_debug_entry(struct target *target)
390 struct arm920t_common *arm920t = target_to_arm920(target);
392 /* examine cp15 control reg */
393 arm920t_read_cp15_physical(target,
394 CP15PHYS_CTRL, &arm920t->cp15_control_reg);
395 jtag_execute_queue();
396 LOG_DEBUG("cp15_control_reg: %8.8" PRIx32 "", arm920t->cp15_control_reg);
398 if (arm920t->armv4_5_mmu.armv4_5_cache.ctype == -1)
400 uint32_t cache_type_reg;
401 /* identify caches */
402 arm920t_read_cp15_physical(target,
403 CP15PHYS_CACHETYPE, &cache_type_reg);
404 jtag_execute_queue();
405 armv4_5_identify_cache(cache_type_reg, &arm920t->armv4_5_mmu.armv4_5_cache);
408 arm920t->armv4_5_mmu.mmu_enabled = (arm920t->cp15_control_reg & 0x1U) ? 1 : 0;
409 arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = (arm920t->cp15_control_reg & 0x4U) ? 1 : 0;
410 arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled = (arm920t->cp15_control_reg & 0x1000U) ? 1 : 0;
412 /* save i/d fault status and address register */
413 arm920t_read_cp15_interpreted(target, 0xee150f10, 0x0, &arm920t->d_fsr);
414 arm920t_read_cp15_interpreted(target, 0xee150f30, 0x0, &arm920t->i_fsr);
415 arm920t_read_cp15_interpreted(target, 0xee160f10, 0x0, &arm920t->d_far);
416 arm920t_read_cp15_interpreted(target, 0xee160f30, 0x0, &arm920t->i_far);
418 LOG_DEBUG("D FSR: 0x%8.8" PRIx32 ", D FAR: 0x%8.8" PRIx32 ", I FSR: 0x%8.8" PRIx32 ", I FAR: 0x%8.8" PRIx32 "",
419 arm920t->d_fsr, arm920t->d_far, arm920t->i_fsr, arm920t->i_far);
421 if (arm920t->preserve_cache)
423 /* read-modify-write CP15 test state register
424 * to disable I/D-cache linefills */
425 arm920t_read_cp15_physical(target,
426 CP15PHYS_TESTSTATE, &cp15c15);
427 jtag_execute_queue();
429 arm920t_write_cp15_physical(target,
430 CP15PHYS_TESTSTATE, cp15c15);
435 void arm920t_pre_restore_context(struct target *target)
438 struct arm920t_common *arm920t = target_to_arm920(target);
440 /* restore i/d fault status and address register */
441 arm920t_write_cp15_interpreted(target, 0xee050f10, arm920t->d_fsr, 0x0);
442 arm920t_write_cp15_interpreted(target, 0xee050f30, arm920t->i_fsr, 0x0);
443 arm920t_write_cp15_interpreted(target, 0xee060f10, arm920t->d_far, 0x0);
444 arm920t_write_cp15_interpreted(target, 0xee060f30, arm920t->i_far, 0x0);
446 /* read-modify-write CP15 test state register
447 * to reenable I/D-cache linefills */
448 if (arm920t->preserve_cache)
450 arm920t_read_cp15_physical(target,
451 CP15PHYS_TESTSTATE, &cp15c15);
452 jtag_execute_queue();
454 arm920t_write_cp15_physical(target,
455 CP15PHYS_TESTSTATE, cp15c15);
459 static const char arm920_not[] = "target is not an ARM920";
461 static int arm920t_verify_pointer(struct command_context *cmd_ctx,
462 struct arm920t_common *arm920t)
464 if (arm920t->common_magic != ARM920T_COMMON_MAGIC) {
465 command_print(cmd_ctx, arm920_not);
466 return ERROR_TARGET_INVALID;
472 /** Logs summary of ARM920 state for a halted target. */
473 int arm920t_arch_state(struct target *target)
475 static const char *state[] =
477 "disabled", "enabled"
480 struct arm920t_common *arm920t = target_to_arm920(target);
483 if (arm920t->common_magic != ARM920T_COMMON_MAGIC)
485 LOG_ERROR("BUG: %s", arm920_not);
486 return ERROR_TARGET_INVALID;
489 armv4_5 = &arm920t->arm7_9_common.armv4_5_common;
491 arm_arch_state(target);
492 LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s",
493 state[arm920t->armv4_5_mmu.mmu_enabled],
494 state[arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
495 state[arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
500 static int arm920_mmu(struct target *target, int *enabled)
502 if (target->state != TARGET_HALTED) {
503 LOG_ERROR("%s: target not halted", __func__);
504 return ERROR_TARGET_INVALID;
507 *enabled = target_to_arm920(target)->armv4_5_mmu.mmu_enabled;
511 static int arm920_virt2phys(struct target *target,
512 uint32_t virt, uint32_t *phys)
518 struct arm920t_common *arm920t = target_to_arm920(target);
520 uint32_t ret = armv4_5_mmu_translate_va(target, &arm920t->armv4_5_mmu, virt, &type, &cb, &domain, &ap);
529 /** Reads a buffer, in the specified word size, with current MMU settings. */
530 int arm920t_read_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
534 retval = arm7_9_read_memory(target, address, size, count, buffer);
540 static int arm920t_read_phys_memory(struct target *target,
541 uint32_t address, uint32_t size,
542 uint32_t count, uint8_t *buffer)
544 struct arm920t_common *arm920t = target_to_arm920(target);
546 return armv4_5_mmu_read_physical(target, &arm920t->armv4_5_mmu,
547 address, size, count, buffer);
550 static int arm920t_write_phys_memory(struct target *target,
551 uint32_t address, uint32_t size,
552 uint32_t count, uint8_t *buffer)
554 struct arm920t_common *arm920t = target_to_arm920(target);
556 return armv4_5_mmu_write_physical(target, &arm920t->armv4_5_mmu,
557 address, size, count, buffer);
561 /** Writes a buffer, in the specified word size, with current MMU settings. */
562 int arm920t_write_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
566 if ((retval = arm7_9_write_memory(target, address, size, count, buffer)) != ERROR_OK)
569 /* This fn is used to write breakpoints, so we need to make sure
570 * that the data cache is flushed and the instruction cache is
573 if (((size == 4) || (size == 2)) && (count == 1))
575 struct arm920t_common *arm920t = target_to_arm920(target);
577 if (arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled)
579 LOG_DEBUG("D-Cache enabled, flush and invalidate cache line");
580 /* MCR p15,0,Rd,c7,c10,2 */
581 retval = arm920t_write_cp15_interpreted(target, 0xee070f5e, 0x0, address);
582 if (retval != ERROR_OK)
586 if (arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
588 LOG_DEBUG("I-Cache enabled, invalidating affected I-Cache line");
589 retval = arm920t_write_cp15_interpreted(target, 0xee070f35, 0x0, address);
590 if (retval != ERROR_OK)
599 int arm920t_soft_reset_halt(struct target *target)
601 int retval = ERROR_OK;
602 struct arm920t_common *arm920t = target_to_arm920(target);
603 struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
604 struct arm *armv4_5 = &arm7_9->armv4_5_common;
605 struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
607 if ((retval = target_halt(target)) != ERROR_OK)
612 long long then = timeval_ms();
614 while (!(timeout = ((timeval_ms()-then) > 1000)))
616 if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1) == 0)
618 embeddedice_read_reg(dbg_stat);
619 if ((retval = jtag_execute_queue()) != ERROR_OK)
627 if (debug_level >= 3)
629 /* do not eat all CPU, time out after 1 se*/
638 LOG_ERROR("Failed to halt CPU after 1 sec");
639 return ERROR_TARGET_TIMEOUT;
642 target->state = TARGET_HALTED;
644 /* SVC, ARM state, IRQ and FIQ disabled */
647 cpsr = buf_get_u32(armv4_5->cpsr->value, 0, 32);
650 arm_set_cpsr(armv4_5, cpsr);
651 armv4_5->cpsr->dirty = 1;
653 /* start fetching from 0x0 */
654 buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
655 armv4_5->core_cache->reg_list[15].dirty = 1;
656 armv4_5->core_cache->reg_list[15].valid = 1;
658 arm920t_disable_mmu_caches(target, 1, 1, 1);
659 arm920t->armv4_5_mmu.mmu_enabled = 0;
660 arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = 0;
661 arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled = 0;
663 if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
671 /* FIXME remove forward decls */
672 static int arm920t_mrc(struct target *target, int cpnum,
673 uint32_t op1, uint32_t op2,
674 uint32_t CRn, uint32_t CRm,
676 static int arm920t_mcr(struct target *target, int cpnum,
677 uint32_t op1, uint32_t op2,
678 uint32_t CRn, uint32_t CRm,
681 int arm920t_init_arch_info(struct target *target, struct arm920t_common *arm920t, struct jtag_tap *tap)
683 struct arm7_9_common *arm7_9 = &arm920t->arm7_9_common;
685 arm7_9->armv4_5_common.mrc = arm920t_mrc;
686 arm7_9->armv4_5_common.mcr = arm920t_mcr;
688 /* initialize arm7/arm9 specific info (including armv4_5) */
689 arm9tdmi_init_arch_info(target, arm7_9, tap);
691 arm920t->common_magic = ARM920T_COMMON_MAGIC;
693 arm7_9->post_debug_entry = arm920t_post_debug_entry;
694 arm7_9->pre_restore_context = arm920t_pre_restore_context;
696 arm920t->armv4_5_mmu.armv4_5_cache.ctype = -1;
697 arm920t->armv4_5_mmu.get_ttb = arm920t_get_ttb;
698 arm920t->armv4_5_mmu.read_memory = arm7_9_read_memory;
699 arm920t->armv4_5_mmu.write_memory = arm7_9_write_memory;
700 arm920t->armv4_5_mmu.disable_mmu_caches = arm920t_disable_mmu_caches;
701 arm920t->armv4_5_mmu.enable_mmu_caches = arm920t_enable_mmu_caches;
702 arm920t->armv4_5_mmu.has_tiny_pages = 1;
703 arm920t->armv4_5_mmu.mmu_enabled = 0;
705 /* disabling linefills leads to lockups, so keep them enabled for now
706 * this doesn't affect correctness, but might affect timing issues, if
707 * important data is evicted from the cache during the debug session
709 arm920t->preserve_cache = 0;
711 /* override hw single-step capability from ARM9TDMI */
712 arm7_9->has_single_step = 1;
717 static int arm920t_target_create(struct target *target, Jim_Interp *interp)
719 struct arm920t_common *arm920t = calloc(1,sizeof(struct arm920t_common));
721 return arm920t_init_arch_info(target, arm920t, target->tap);
724 COMMAND_HANDLER(arm920t_handle_read_cache_command)
726 int retval = ERROR_OK;
727 struct target *target = get_current_target(CMD_CTX);
728 struct arm920t_common *arm920t = target_to_arm920(target);
729 struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
730 struct arm *armv4_5 = &arm7_9->armv4_5_common;
732 uint32_t cp15_ctrl, cp15_ctrl_saved;
734 uint32_t *regs_p[16];
735 uint32_t C15_C_D_Ind, C15_C_I_Ind;
738 struct arm920t_cache_line d_cache[8][64], i_cache[8][64];
742 retval = arm920t_verify_pointer(CMD_CTX, arm920t);
743 if (retval != ERROR_OK)
748 command_print(CMD_CTX, "usage: arm920t read_cache <filename>");
752 if ((output = fopen(CMD_ARGV[0], "w")) == NULL)
754 LOG_DEBUG("error opening cache content file");
758 for (i = 0; i < 16; i++)
759 regs_p[i] = ®s[i];
761 /* disable MMU and Caches */
762 arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_ctrl);
763 if ((retval = jtag_execute_queue()) != ERROR_OK)
767 cp15_ctrl_saved = cp15_ctrl;
768 cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
769 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl);
771 /* read CP15 test state register */
772 arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
773 jtag_execute_queue();
775 /* read DCache content */
776 fprintf(output, "DCache:\n");
778 /* go through segments 0 to nsets (8 on ARM920T, 4 on ARM922T) */
779 for (segment = 0; segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets; segment++)
781 fprintf(output, "\nsegment: %i\n----------", segment);
783 /* Ra: r0 = SBZ(31:8):segment(7:5):SBZ(4:0) */
784 regs[0] = 0x0 | (segment << 5);
785 arm9tdmi_write_core_regs(target, 0x1, regs);
787 /* set interpret mode */
789 arm920t_write_cp15_physical(target,
790 CP15PHYS_TESTSTATE, cp15c15);
792 /* D CAM Read, loads current victim into C15.C.D.Ind */
793 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,6,2), ARMV4_5_LDR(1, 0));
795 /* read current victim */
796 arm920t_read_cp15_physical(target,
797 CP15PHYS_DCACHE_IDX, &C15_C_D_Ind);
799 /* clear interpret mode */
801 arm920t_write_cp15_physical(target,
802 CP15PHYS_TESTSTATE, cp15c15);
804 for (index = 0; index < 64; index++)
806 /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
807 regs[0] = 0x0 | (segment << 5) | (index << 26);
808 arm9tdmi_write_core_regs(target, 0x1, regs);
810 /* set interpret mode */
812 arm920t_write_cp15_physical(target,
813 CP15PHYS_TESTSTATE, cp15c15);
815 /* Write DCache victim */
816 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
819 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,10,2), ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
822 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,6,2), ARMV4_5_LDR(9, 0));
824 /* clear interpret mode */
826 arm920t_write_cp15_physical(target,
827 CP15PHYS_TESTSTATE, cp15c15);
829 /* read D RAM and CAM content */
830 arm9tdmi_read_core_regs(target, 0x3fe, regs_p);
831 if ((retval = jtag_execute_queue()) != ERROR_OK)
836 d_cache[segment][index].cam = regs[9];
839 regs[9] &= 0xfffffffe;
840 fprintf(output, "\nsegment: %i, index: %i, CAM: 0x%8.8" PRIx32 ", content (%s):\n", segment, index, regs[9], (regs[9] & 0x10) ? "valid" : "invalid");
842 for (i = 1; i < 9; i++)
844 d_cache[segment][index].data[i] = regs[i];
845 fprintf(output, "%i: 0x%8.8" PRIx32 "\n", i-1, regs[i]);
850 /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
851 regs[0] = 0x0 | (segment << 5) | (C15_C_D_Ind << 26);
852 arm9tdmi_write_core_regs(target, 0x1, regs);
854 /* set interpret mode */
856 arm920t_write_cp15_physical(target,
857 CP15PHYS_TESTSTATE, cp15c15);
859 /* Write DCache victim */
860 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
862 /* clear interpret mode */
864 arm920t_write_cp15_physical(target,
865 CP15PHYS_TESTSTATE, cp15c15);
868 /* read ICache content */
869 fprintf(output, "ICache:\n");
871 /* go through segments 0 to nsets (8 on ARM920T, 4 on ARM922T) */
872 for (segment = 0; segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets; segment++)
874 fprintf(output, "segment: %i\n----------", segment);
876 /* Ra: r0 = SBZ(31:8):segment(7:5):SBZ(4:0) */
877 regs[0] = 0x0 | (segment << 5);
878 arm9tdmi_write_core_regs(target, 0x1, regs);
880 /* set interpret mode */
882 arm920t_write_cp15_physical(target,
883 CP15PHYS_TESTSTATE, cp15c15);
885 /* I CAM Read, loads current victim into C15.C.I.Ind */
886 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,5,2), ARMV4_5_LDR(1, 0));
888 /* read current victim */
889 arm920t_read_cp15_physical(target, CP15PHYS_ICACHE_IDX,
892 /* clear interpret mode */
894 arm920t_write_cp15_physical(target,
895 CP15PHYS_TESTSTATE, cp15c15);
897 for (index = 0; index < 64; index++)
899 /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
900 regs[0] = 0x0 | (segment << 5) | (index << 26);
901 arm9tdmi_write_core_regs(target, 0x1, regs);
903 /* set interpret mode */
905 arm920t_write_cp15_physical(target,
906 CP15PHYS_TESTSTATE, cp15c15);
908 /* Write ICache victim */
909 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
912 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,9,2), ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
915 arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,5,2), ARMV4_5_LDR(9, 0));
917 /* clear interpret mode */
919 arm920t_write_cp15_physical(target,
920 CP15PHYS_TESTSTATE, cp15c15);
922 /* read I RAM and CAM content */
923 arm9tdmi_read_core_regs(target, 0x3fe, regs_p);
924 if ((retval = jtag_execute_queue()) != ERROR_OK)
929 i_cache[segment][index].cam = regs[9];
932 regs[9] &= 0xfffffffe;
933 fprintf(output, "\nsegment: %i, index: %i, CAM: 0x%8.8" PRIx32 ", content (%s):\n", segment, index, regs[9], (regs[9] & 0x10) ? "valid" : "invalid");
935 for (i = 1; i < 9; i++)
937 i_cache[segment][index].data[i] = regs[i];
938 fprintf(output, "%i: 0x%8.8" PRIx32 "\n", i-1, regs[i]);
942 /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
943 regs[0] = 0x0 | (segment << 5) | (C15_C_D_Ind << 26);
944 arm9tdmi_write_core_regs(target, 0x1, regs);
946 /* set interpret mode */
948 arm920t_write_cp15_physical(target,
949 CP15PHYS_TESTSTATE, cp15c15);
951 /* Write ICache victim */
952 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
954 /* clear interpret mode */
956 arm920t_write_cp15_physical(target,
957 CP15PHYS_TESTSTATE, cp15c15);
960 /* restore CP15 MMU and Cache settings */
961 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl_saved);
963 command_print(CMD_CTX, "cache content successfully output to %s", CMD_ARGV[0]);
967 if (!is_arm_mode(armv4_5->core_mode))
970 /* force writeback of the valid data */
971 r = armv4_5->core_cache->reg_list;
972 r[0].dirty = r[0].valid;
973 r[1].dirty = r[1].valid;
974 r[2].dirty = r[2].valid;
975 r[3].dirty = r[3].valid;
976 r[4].dirty = r[4].valid;
977 r[5].dirty = r[5].valid;
978 r[6].dirty = r[6].valid;
979 r[7].dirty = r[7].valid;
981 r = arm_reg_current(armv4_5, 8);
984 r = arm_reg_current(armv4_5, 9);
990 COMMAND_HANDLER(arm920t_handle_read_mmu_command)
992 int retval = ERROR_OK;
993 struct target *target = get_current_target(CMD_CTX);
994 struct arm920t_common *arm920t = target_to_arm920(target);
995 struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
996 struct arm *armv4_5 = &arm7_9->armv4_5_common;
998 uint32_t cp15_ctrl, cp15_ctrl_saved;
1000 uint32_t *regs_p[16];
1003 uint32_t Dlockdown, Ilockdown;
1004 struct arm920t_tlb_entry d_tlb[64], i_tlb[64];
1008 retval = arm920t_verify_pointer(CMD_CTX, arm920t);
1009 if (retval != ERROR_OK)
1014 command_print(CMD_CTX, "usage: arm920t read_mmu <filename>");
1018 if ((output = fopen(CMD_ARGV[0], "w")) == NULL)
1020 LOG_DEBUG("error opening mmu content file");
1024 for (i = 0; i < 16; i++)
1025 regs_p[i] = ®s[i];
1027 /* disable MMU and Caches */
1028 arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_ctrl);
1029 if ((retval = jtag_execute_queue()) != ERROR_OK)
1033 cp15_ctrl_saved = cp15_ctrl;
1034 cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
1035 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl);
1037 /* read CP15 test state register */
1038 arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
1039 if ((retval = jtag_execute_queue()) != ERROR_OK)
1044 /* prepare reading D TLB content
1047 /* set interpret mode */
1049 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
1051 /* Read D TLB lockdown */
1052 arm920t_execute_cp15(target, ARMV4_5_MRC(15,0,0,10,0,0), ARMV4_5_LDR(1, 0));
1054 /* clear interpret mode */
1056 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
1058 /* read D TLB lockdown stored to r1 */
1059 arm9tdmi_read_core_regs(target, 0x2, regs_p);
1060 if ((retval = jtag_execute_queue()) != ERROR_OK)
1064 Dlockdown = regs[1];
1066 for (victim = 0; victim < 64; victim += 8)
1068 /* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
1069 * base remains unchanged, victim goes through entries 0 to 63 */
1070 regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
1071 arm9tdmi_write_core_regs(target, 0x2, regs);
1073 /* set interpret mode */
1075 arm920t_write_cp15_physical(target,
1076 CP15PHYS_TESTSTATE, cp15c15);
1078 /* Write D TLB lockdown */
1079 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
1081 /* Read D TLB CAM */
1082 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,6,4), ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
1084 /* clear interpret mode */
1086 arm920t_write_cp15_physical(target,
1087 CP15PHYS_TESTSTATE, cp15c15);
1089 /* read D TLB CAM content stored to r2-r9 */
1090 arm9tdmi_read_core_regs(target, 0x3fc, regs_p);
1091 if ((retval = jtag_execute_queue()) != ERROR_OK)
1096 for (i = 0; i < 8; i++)
1097 d_tlb[victim + i].cam = regs[i + 2];
1100 for (victim = 0; victim < 64; victim++)
1102 /* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
1103 * base remains unchanged, victim goes through entries 0 to 63 */
1104 regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
1105 arm9tdmi_write_core_regs(target, 0x2, regs);
1107 /* set interpret mode */
1109 arm920t_write_cp15_physical(target,
1110 CP15PHYS_TESTSTATE, cp15c15);
1112 /* Write D TLB lockdown */
1113 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
1115 /* Read D TLB RAM1 */
1116 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,10,4), ARMV4_5_LDR(2,0));
1118 /* Read D TLB RAM2 */
1119 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,2,5), ARMV4_5_LDR(3,0));
1121 /* clear interpret mode */
1123 arm920t_write_cp15_physical(target,
1124 CP15PHYS_TESTSTATE, cp15c15);
1126 /* read D TLB RAM content stored to r2 and r3 */
1127 arm9tdmi_read_core_regs(target, 0xc, regs_p);
1128 if ((retval = jtag_execute_queue()) != ERROR_OK)
1133 d_tlb[victim].ram1 = regs[2];
1134 d_tlb[victim].ram2 = regs[3];
1137 /* restore D TLB lockdown */
1138 regs[1] = Dlockdown;
1139 arm9tdmi_write_core_regs(target, 0x2, regs);
1141 /* Write D TLB lockdown */
1142 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
1144 /* prepare reading I TLB content
1147 /* set interpret mode */
1149 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
1151 /* Read I TLB lockdown */
1152 arm920t_execute_cp15(target, ARMV4_5_MRC(15,0,0,10,0,1), ARMV4_5_LDR(1, 0));
1154 /* clear interpret mode */
1156 arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
1158 /* read I TLB lockdown stored to r1 */
1159 arm9tdmi_read_core_regs(target, 0x2, regs_p);
1160 if ((retval = jtag_execute_queue()) != ERROR_OK)
1164 Ilockdown = regs[1];
1166 for (victim = 0; victim < 64; victim += 8)
1168 /* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
1169 * base remains unchanged, victim goes through entries 0 to 63 */
1170 regs[1] = (Ilockdown & 0xfc000000) | (victim << 20);
1171 arm9tdmi_write_core_regs(target, 0x2, regs);
1173 /* set interpret mode */
1175 arm920t_write_cp15_physical(target,
1176 CP15PHYS_TESTSTATE, cp15c15);
1178 /* Write I TLB lockdown */
1179 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
1181 /* Read I TLB CAM */
1182 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,5,4), ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
1184 /* clear interpret mode */
1186 arm920t_write_cp15_physical(target,
1187 CP15PHYS_TESTSTATE, cp15c15);
1189 /* read I TLB CAM content stored to r2-r9 */
1190 arm9tdmi_read_core_regs(target, 0x3fc, regs_p);
1191 if ((retval = jtag_execute_queue()) != ERROR_OK)
1196 for (i = 0; i < 8; i++)
1197 i_tlb[i + victim].cam = regs[i + 2];
1200 for (victim = 0; victim < 64; victim++)
1202 /* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
1203 * base remains unchanged, victim goes through entries 0 to 63 */
1204 regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
1205 arm9tdmi_write_core_regs(target, 0x2, regs);
1207 /* set interpret mode */
1209 arm920t_write_cp15_physical(target,
1210 CP15PHYS_TESTSTATE, cp15c15);
1212 /* Write I TLB lockdown */
1213 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
1215 /* Read I TLB RAM1 */
1216 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,9,4), ARMV4_5_LDR(2,0));
1218 /* Read I TLB RAM2 */
1219 arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,1,5), ARMV4_5_LDR(3,0));
1221 /* clear interpret mode */
1223 arm920t_write_cp15_physical(target,
1224 CP15PHYS_TESTSTATE, cp15c15);
1226 /* read I TLB RAM content stored to r2 and r3 */
1227 arm9tdmi_read_core_regs(target, 0xc, regs_p);
1228 if ((retval = jtag_execute_queue()) != ERROR_OK)
1233 i_tlb[victim].ram1 = regs[2];
1234 i_tlb[victim].ram2 = regs[3];
1237 /* restore I TLB lockdown */
1238 regs[1] = Ilockdown;
1239 arm9tdmi_write_core_regs(target, 0x2, regs);
1241 /* Write I TLB lockdown */
1242 arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
1244 /* restore CP15 MMU and Cache settings */
1245 arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl_saved);
1247 /* output data to file */
1248 fprintf(output, "D TLB content:\n");
1249 for (i = 0; i < 64; i++)
1251 fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " %s\n", i, d_tlb[i].cam, d_tlb[i].ram1, d_tlb[i].ram2, (d_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
1254 fprintf(output, "\n\nI TLB content:\n");
1255 for (i = 0; i < 64; i++)
1257 fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " %s\n", i, i_tlb[i].cam, i_tlb[i].ram1, i_tlb[i].ram2, (i_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
1260 command_print(CMD_CTX, "mmu content successfully output to %s", CMD_ARGV[0]);
1264 if (!is_arm_mode(armv4_5->core_mode))
1267 /* force writeback of the valid data */
1268 r = armv4_5->core_cache->reg_list;
1269 r[0].dirty = r[0].valid;
1270 r[1].dirty = r[1].valid;
1271 r[2].dirty = r[2].valid;
1272 r[3].dirty = r[3].valid;
1273 r[4].dirty = r[4].valid;
1274 r[5].dirty = r[5].valid;
1275 r[6].dirty = r[6].valid;
1276 r[7].dirty = r[7].valid;
1278 r = arm_reg_current(armv4_5, 8);
1279 r->dirty = r->valid;
1281 r = arm_reg_current(armv4_5, 9);
1282 r->dirty = r->valid;
1287 COMMAND_HANDLER(arm920t_handle_cp15_command)
1290 struct target *target = get_current_target(CMD_CTX);
1291 struct arm920t_common *arm920t = target_to_arm920(target);
1293 retval = arm920t_verify_pointer(CMD_CTX, arm920t);
1294 if (retval != ERROR_OK)
1297 if (target->state != TARGET_HALTED)
1299 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
1303 /* one or more argument, access a single register (write if second argument is given */
1307 COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], address);
1312 if ((retval = arm920t_read_cp15_physical(target, address, &value)) != ERROR_OK)
1314 command_print(CMD_CTX, "couldn't access reg %i", address);
1317 if ((retval = jtag_execute_queue()) != ERROR_OK)
1322 command_print(CMD_CTX, "%i: %8.8" PRIx32 "", address, value);
1324 else if (CMD_ARGC == 2)
1327 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
1328 if ((retval = arm920t_write_cp15_physical(target, address, value)) != ERROR_OK)
1330 command_print(CMD_CTX, "couldn't access reg %i", address);
1333 command_print(CMD_CTX, "%i: %8.8" PRIx32 "", address, value);
1340 COMMAND_HANDLER(arm920t_handle_cp15i_command)
1343 struct target *target = get_current_target(CMD_CTX);
1344 struct arm920t_common *arm920t = target_to_arm920(target);
1346 retval = arm920t_verify_pointer(CMD_CTX, arm920t);
1347 if (retval != ERROR_OK)
1351 if (target->state != TARGET_HALTED)
1353 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
1357 /* one or more argument, access a single register (write if second argument is given */
1361 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], opcode);
1366 if ((retval = arm920t_read_cp15_interpreted(target, opcode, 0x0, &value)) != ERROR_OK)
1368 command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
1372 command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 "", opcode, value);
1374 else if (CMD_ARGC == 2)
1377 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
1378 if ((retval = arm920t_write_cp15_interpreted(target, opcode, value, 0)) != ERROR_OK)
1380 command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
1383 command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 "", opcode, value);
1385 else if (CMD_ARGC == 3)
1388 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
1390 COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], address);
1391 if ((retval = arm920t_write_cp15_interpreted(target, opcode, value, address)) != ERROR_OK)
1393 command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
1396 command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 " %8.8" PRIx32 "", opcode, value, address);
1401 command_print(CMD_CTX, "usage: arm920t cp15i <opcode> [value] [address]");
1407 COMMAND_HANDLER(arm920t_handle_cache_info_command)
1410 struct target *target = get_current_target(CMD_CTX);
1411 struct arm920t_common *arm920t = target_to_arm920(target);
1413 retval = arm920t_verify_pointer(CMD_CTX, arm920t);
1414 if (retval != ERROR_OK)
1417 return armv4_5_handle_cache_info_command(CMD_CTX, &arm920t->armv4_5_mmu.armv4_5_cache);
1421 static int arm920t_mrc(struct target *target, int cpnum,
1422 uint32_t op1, uint32_t op2,
1423 uint32_t CRn, uint32_t CRm,
1428 LOG_ERROR("Only cp15 is supported");
1433 return arm920t_read_cp15_interpreted(target,
1434 ARMV4_5_MRC(cpnum, op1, 0, CRn, CRm, op2),
1438 static int arm920t_mcr(struct target *target, int cpnum,
1439 uint32_t op1, uint32_t op2,
1440 uint32_t CRn, uint32_t CRm,
1445 LOG_ERROR("Only cp15 is supported");
1449 /* write "from" r0 */
1450 return arm920t_write_cp15_interpreted(target,
1451 ARMV4_5_MCR(cpnum, op1, 0, CRn, CRm, op2),
1455 static const struct command_registration arm920t_exec_command_handlers[] = {
1458 .handler = arm920t_handle_cp15_command,
1459 .mode = COMMAND_EXEC,
1460 .help = "display/modify cp15 register",
1461 .usage = "regnum [value]",
1465 .handler = arm920t_handle_cp15i_command,
1466 .mode = COMMAND_EXEC,
1467 /* prefer using less error-prone "arm mcr" or "arm mrc" */
1468 .help = "display/modify cp15 register using ARM opcode"
1470 .usage = "instruction [value [address]]",
1473 .name = "cache_info",
1474 .handler = arm920t_handle_cache_info_command,
1475 .mode = COMMAND_EXEC,
1476 .help = "display information about target caches",
1479 .name = "read_cache",
1480 .handler = arm920t_handle_read_cache_command,
1481 .mode = COMMAND_EXEC,
1482 .help = "dump I/D cache content to file",
1483 .usage = "filename",
1487 .handler = arm920t_handle_read_mmu_command,
1488 .mode = COMMAND_EXEC,
1489 .help = "dump I/D mmu content to file",
1490 .usage = "filename",
1492 COMMAND_REGISTRATION_DONE
1494 const struct command_registration arm920t_command_handlers[] = {
1496 .chain = arm9tdmi_command_handlers,
1500 .mode = COMMAND_ANY,
1501 .help = "arm920t command group",
1502 .chain = arm920t_exec_command_handlers,
1504 COMMAND_REGISTRATION_DONE
1507 /** Holds methods for ARM920 targets. */
1508 struct target_type arm920t_target =
1512 .poll = arm7_9_poll,
1513 .arch_state = arm920t_arch_state,
1515 .target_request_data = arm7_9_target_request_data,
1517 .halt = arm7_9_halt,
1518 .resume = arm7_9_resume,
1519 .step = arm7_9_step,
1521 .assert_reset = arm7_9_assert_reset,
1522 .deassert_reset = arm7_9_deassert_reset,
1523 .soft_reset_halt = arm920t_soft_reset_halt,
1525 .get_gdb_reg_list = arm_get_gdb_reg_list,
1527 .read_memory = arm920t_read_memory,
1528 .write_memory = arm920t_write_memory,
1529 .read_phys_memory = arm920t_read_phys_memory,
1530 .write_phys_memory = arm920t_write_phys_memory,
1532 .virt2phys = arm920_virt2phys,
1534 .bulk_write_memory = arm7_9_bulk_write_memory,
1536 .checksum_memory = arm_checksum_memory,
1537 .blank_check_memory = arm_blank_check_memory,
1539 .run_algorithm = armv4_5_run_algorithm,
1541 .add_breakpoint = arm7_9_add_breakpoint,
1542 .remove_breakpoint = arm7_9_remove_breakpoint,
1543 .add_watchpoint = arm7_9_add_watchpoint,
1544 .remove_watchpoint = arm7_9_remove_watchpoint,
1546 .commands = arm920t_command_handlers,
1547 .target_create = arm920t_target_create,
1548 .init_target = arm9tdmi_init_target,
1549 .examine = arm7_9_examine,
1550 .check_reset = arm7_9_check_reset,