1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
29 ***************************************************************************/
34 #include "jtag/interface.h"
35 #include "breakpoints.h"
37 #include "target_request.h"
38 #include "target_type.h"
39 #include "arm_disassembler.h"
41 #include "arm_opcodes.h"
42 #include "arm_semihosting.h"
43 #include <helper/time_support.h>
45 /* NOTE: most of this should work fine for the Cortex-M1 and
46 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
47 * Some differences: M0/M1 doesn't have FBP remapping or the
48 * DWT tracing/profiling support. (So the cycle counter will
49 * not be usable; the other stuff isn't currently used here.)
51 * Although there are some workarounds for errata seen only in r0p0
52 * silicon, such old parts are hard to find and thus not much tested
57 * Returns the type of a break point required by address location
59 #define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
61 /* forward declarations */
62 static int cortex_m_store_core_reg_u32(struct target *target,
63 uint32_t num, uint32_t value);
64 static void cortex_m_dwt_free(struct target *target);
66 static int cortexm_dap_read_coreregister_u32(struct target *target,
67 uint32_t *value, int regnum)
69 struct armv7m_common *armv7m = target_to_armv7m(target);
73 /* because the DCB_DCRDR is used for the emulated dcc channel
74 * we have to save/restore the DCB_DCRDR when used */
75 if (target->dbg_msg_enabled) {
76 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
77 if (retval != ERROR_OK)
81 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRSR, regnum);
82 if (retval != ERROR_OK)
85 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DCRDR, value);
86 if (retval != ERROR_OK)
89 if (target->dbg_msg_enabled) {
90 /* restore DCB_DCRDR - this needs to be in a separate
91 * transaction otherwise the emulated DCC channel breaks */
92 if (retval == ERROR_OK)
93 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
99 static int cortexm_dap_write_coreregister_u32(struct target *target,
100 uint32_t value, int regnum)
102 struct armv7m_common *armv7m = target_to_armv7m(target);
106 /* because the DCB_DCRDR is used for the emulated dcc channel
107 * we have to save/restore the DCB_DCRDR when used */
108 if (target->dbg_msg_enabled) {
109 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
110 if (retval != ERROR_OK)
114 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, value);
115 if (retval != ERROR_OK)
118 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRSR, regnum | DCRSR_WnR);
119 if (retval != ERROR_OK)
122 if (target->dbg_msg_enabled) {
123 /* restore DCB_DCRDR - this needs to be in a seperate
124 * transaction otherwise the emulated DCC channel breaks */
125 if (retval == ERROR_OK)
126 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
132 static int cortex_m_write_debug_halt_mask(struct target *target,
133 uint32_t mask_on, uint32_t mask_off)
135 struct cortex_m_common *cortex_m = target_to_cm(target);
136 struct armv7m_common *armv7m = &cortex_m->armv7m;
138 /* mask off status bits */
139 cortex_m->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
140 /* create new register mask */
141 cortex_m->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
143 return mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR, cortex_m->dcb_dhcsr);
146 static int cortex_m_clear_halt(struct target *target)
148 struct cortex_m_common *cortex_m = target_to_cm(target);
149 struct armv7m_common *armv7m = &cortex_m->armv7m;
152 /* clear step if any */
153 cortex_m_write_debug_halt_mask(target, C_HALT, C_STEP);
155 /* Read Debug Fault Status Register */
156 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR, &cortex_m->nvic_dfsr);
157 if (retval != ERROR_OK)
160 /* Clear Debug Fault Status */
161 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_DFSR, cortex_m->nvic_dfsr);
162 if (retval != ERROR_OK)
164 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m->nvic_dfsr);
169 static int cortex_m_single_step_core(struct target *target)
171 struct cortex_m_common *cortex_m = target_to_cm(target);
172 struct armv7m_common *armv7m = &cortex_m->armv7m;
176 /* backup dhcsr reg */
177 dhcsr_save = cortex_m->dcb_dhcsr;
179 /* Mask interrupts before clearing halt, if done already. This avoids
180 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
181 * HALT can put the core into an unknown state.
183 if (!(cortex_m->dcb_dhcsr & C_MASKINTS)) {
184 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
185 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
186 if (retval != ERROR_OK)
189 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
190 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
191 if (retval != ERROR_OK)
195 /* restore dhcsr reg */
196 cortex_m->dcb_dhcsr = dhcsr_save;
197 cortex_m_clear_halt(target);
202 static int cortex_m_enable_fpb(struct target *target)
204 int retval = target_write_u32(target, FP_CTRL, 3);
205 if (retval != ERROR_OK)
208 /* check the fpb is actually enabled */
210 retval = target_read_u32(target, FP_CTRL, &fpctrl);
211 if (retval != ERROR_OK)
220 static int cortex_m_endreset_event(struct target *target)
225 struct cortex_m_common *cortex_m = target_to_cm(target);
226 struct armv7m_common *armv7m = &cortex_m->armv7m;
227 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
228 struct cortex_m_fp_comparator *fp_list = cortex_m->fp_comparator_list;
229 struct cortex_m_dwt_comparator *dwt_list = cortex_m->dwt_comparator_list;
231 /* REVISIT The four debug monitor bits are currently ignored... */
232 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &dcb_demcr);
233 if (retval != ERROR_OK)
235 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "", dcb_demcr);
237 /* this register is used for emulated dcc channel */
238 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
239 if (retval != ERROR_OK)
242 /* Enable debug requests */
243 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
244 if (retval != ERROR_OK)
246 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
247 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_DEBUGEN);
248 if (retval != ERROR_OK)
252 /* clear any interrupt masking */
253 cortex_m_write_debug_halt_mask(target, 0, C_MASKINTS);
255 /* Enable features controlled by ITM and DWT blocks, and catch only
256 * the vectors we were told to pay attention to.
258 * Target firmware is responsible for all fault handling policy
259 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
260 * or manual updates to the NVIC SHCSR and CCR registers.
262 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, TRCENA | armv7m->demcr);
263 if (retval != ERROR_OK)
266 /* Paranoia: evidently some (early?) chips don't preserve all the
267 * debug state (including FBP, DWT, etc) across reset...
271 retval = cortex_m_enable_fpb(target);
272 if (retval != ERROR_OK) {
273 LOG_ERROR("Failed to enable the FPB");
277 cortex_m->fpb_enabled = 1;
279 /* Restore FPB registers */
280 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
281 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
282 if (retval != ERROR_OK)
286 /* Restore DWT registers */
287 for (i = 0; i < cortex_m->dwt_num_comp; i++) {
288 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
290 if (retval != ERROR_OK)
292 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
294 if (retval != ERROR_OK)
296 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
297 dwt_list[i].function);
298 if (retval != ERROR_OK)
301 retval = dap_run(swjdp);
302 if (retval != ERROR_OK)
305 register_cache_invalidate(armv7m->arm.core_cache);
307 /* make sure we have latest dhcsr flags */
308 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
313 static int cortex_m_examine_debug_reason(struct target *target)
315 struct cortex_m_common *cortex_m = target_to_cm(target);
317 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
318 * only check the debug reason if we don't know it already */
320 if ((target->debug_reason != DBG_REASON_DBGRQ)
321 && (target->debug_reason != DBG_REASON_SINGLESTEP)) {
322 if (cortex_m->nvic_dfsr & DFSR_BKPT) {
323 target->debug_reason = DBG_REASON_BREAKPOINT;
324 if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
325 target->debug_reason = DBG_REASON_WPTANDBKPT;
326 } else if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
327 target->debug_reason = DBG_REASON_WATCHPOINT;
328 else if (cortex_m->nvic_dfsr & DFSR_VCATCH)
329 target->debug_reason = DBG_REASON_BREAKPOINT;
330 else /* EXTERNAL, HALTED */
331 target->debug_reason = DBG_REASON_UNDEFINED;
337 static int cortex_m_examine_exception_reason(struct target *target)
339 uint32_t shcsr = 0, except_sr = 0, cfsr = -1, except_ar = -1;
340 struct armv7m_common *armv7m = target_to_armv7m(target);
341 struct adiv5_dap *swjdp = armv7m->arm.dap;
344 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_SHCSR, &shcsr);
345 if (retval != ERROR_OK)
347 switch (armv7m->exception_number) {
350 case 3: /* Hard Fault */
351 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_HFSR, &except_sr);
352 if (retval != ERROR_OK)
354 if (except_sr & 0x40000000) {
355 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &cfsr);
356 if (retval != ERROR_OK)
360 case 4: /* Memory Management */
361 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
362 if (retval != ERROR_OK)
364 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_MMFAR, &except_ar);
365 if (retval != ERROR_OK)
368 case 5: /* Bus Fault */
369 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
370 if (retval != ERROR_OK)
372 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_BFAR, &except_ar);
373 if (retval != ERROR_OK)
376 case 6: /* Usage Fault */
377 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
378 if (retval != ERROR_OK)
381 case 11: /* SVCall */
383 case 12: /* Debug Monitor */
384 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_DFSR, &except_sr);
385 if (retval != ERROR_OK)
388 case 14: /* PendSV */
390 case 15: /* SysTick */
396 retval = dap_run(swjdp);
397 if (retval == ERROR_OK)
398 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
399 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
400 armv7m_exception_string(armv7m->exception_number),
401 shcsr, except_sr, cfsr, except_ar);
405 static int cortex_m_debug_entry(struct target *target)
410 struct cortex_m_common *cortex_m = target_to_cm(target);
411 struct armv7m_common *armv7m = &cortex_m->armv7m;
412 struct arm *arm = &armv7m->arm;
417 cortex_m_clear_halt(target);
418 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
419 if (retval != ERROR_OK)
422 retval = armv7m->examine_debug_reason(target);
423 if (retval != ERROR_OK)
426 /* Examine target state and mode
427 * First load register accessible through core debug port */
428 int num_regs = arm->core_cache->num_regs;
430 for (i = 0; i < num_regs; i++) {
431 r = &armv7m->arm.core_cache->reg_list[i];
433 arm->read_core_reg(target, r, i, ARM_MODE_ANY);
437 xPSR = buf_get_u32(r->value, 0, 32);
439 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
442 cortex_m_store_core_reg_u32(target, 16, xPSR & ~0xff);
445 /* Are we in an exception handler */
447 armv7m->exception_number = (xPSR & 0x1FF);
449 arm->core_mode = ARM_MODE_HANDLER;
450 arm->map = armv7m_msp_reg_map;
452 unsigned control = buf_get_u32(arm->core_cache
453 ->reg_list[ARMV7M_CONTROL].value, 0, 2);
455 /* is this thread privileged? */
456 arm->core_mode = control & 1
457 ? ARM_MODE_USER_THREAD
460 /* which stack is it using? */
462 arm->map = armv7m_psp_reg_map;
464 arm->map = armv7m_msp_reg_map;
466 armv7m->exception_number = 0;
469 if (armv7m->exception_number)
470 cortex_m_examine_exception_reason(target);
472 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
473 arm_mode_name(arm->core_mode),
474 buf_get_u32(arm->pc->value, 0, 32),
475 target_state_name(target));
477 if (armv7m->post_debug_entry) {
478 retval = armv7m->post_debug_entry(target);
479 if (retval != ERROR_OK)
486 static int cortex_m_poll(struct target *target)
488 int detected_failure = ERROR_OK;
489 int retval = ERROR_OK;
490 enum target_state prev_target_state = target->state;
491 struct cortex_m_common *cortex_m = target_to_cm(target);
492 struct armv7m_common *armv7m = &cortex_m->armv7m;
494 /* Read from Debug Halting Control and Status Register */
495 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
496 if (retval != ERROR_OK) {
497 target->state = TARGET_UNKNOWN;
501 /* Recover from lockup. See ARMv7-M architecture spec,
502 * section B1.5.15 "Unrecoverable exception cases".
504 if (cortex_m->dcb_dhcsr & S_LOCKUP) {
505 LOG_ERROR("%s -- clearing lockup after double fault",
506 target_name(target));
507 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
508 target->debug_reason = DBG_REASON_DBGRQ;
510 /* We have to execute the rest (the "finally" equivalent, but
511 * still throw this exception again).
513 detected_failure = ERROR_FAIL;
515 /* refresh status bits */
516 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
517 if (retval != ERROR_OK)
521 if (cortex_m->dcb_dhcsr & S_RESET_ST) {
522 target->state = TARGET_RESET;
526 if (target->state == TARGET_RESET) {
527 /* Cannot switch context while running so endreset is
528 * called with target->state == TARGET_RESET
530 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
531 cortex_m->dcb_dhcsr);
532 retval = cortex_m_endreset_event(target);
533 if (retval != ERROR_OK) {
534 target->state = TARGET_UNKNOWN;
537 target->state = TARGET_RUNNING;
538 prev_target_state = TARGET_RUNNING;
541 if (cortex_m->dcb_dhcsr & S_HALT) {
542 target->state = TARGET_HALTED;
544 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET)) {
545 retval = cortex_m_debug_entry(target);
546 if (retval != ERROR_OK)
549 if (arm_semihosting(target, &retval) != 0)
552 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
554 if (prev_target_state == TARGET_DEBUG_RUNNING) {
556 retval = cortex_m_debug_entry(target);
557 if (retval != ERROR_OK)
560 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
564 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
565 * How best to model low power modes?
568 if (target->state == TARGET_UNKNOWN) {
569 /* check if processor is retiring instructions */
570 if (cortex_m->dcb_dhcsr & S_RETIRE_ST) {
571 target->state = TARGET_RUNNING;
576 /* Did we detect a failure condition that we cleared? */
577 if (detected_failure != ERROR_OK)
578 retval = detected_failure;
582 static int cortex_m_halt(struct target *target)
584 LOG_DEBUG("target->state: %s",
585 target_state_name(target));
587 if (target->state == TARGET_HALTED) {
588 LOG_DEBUG("target was already halted");
592 if (target->state == TARGET_UNKNOWN)
593 LOG_WARNING("target was in unknown state when halt was requested");
595 if (target->state == TARGET_RESET) {
596 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst()) {
597 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
598 return ERROR_TARGET_FAILURE;
600 /* we came here in a reset_halt or reset_init sequence
601 * debug entry was already prepared in cortex_m3_assert_reset()
603 target->debug_reason = DBG_REASON_DBGRQ;
609 /* Write to Debug Halting Control and Status Register */
610 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
612 target->debug_reason = DBG_REASON_DBGRQ;
617 static int cortex_m_soft_reset_halt(struct target *target)
619 struct cortex_m_common *cortex_m = target_to_cm(target);
620 struct armv7m_common *armv7m = &cortex_m->armv7m;
621 uint32_t dcb_dhcsr = 0;
622 int retval, timeout = 0;
624 /* soft_reset_halt is deprecated on cortex_m as the same functionality
625 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
626 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
627 * core, not the peripherals */
628 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
630 /* Enter debug state on reset; restore DEMCR in endreset_event() */
631 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR,
632 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
633 if (retval != ERROR_OK)
636 /* Request a core-only reset */
637 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
638 AIRCR_VECTKEY | AIRCR_VECTRESET);
639 if (retval != ERROR_OK)
641 target->state = TARGET_RESET;
643 /* registers are now invalid */
644 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
646 while (timeout < 100) {
647 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &dcb_dhcsr);
648 if (retval == ERROR_OK) {
649 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR,
650 &cortex_m->nvic_dfsr);
651 if (retval != ERROR_OK)
653 if ((dcb_dhcsr & S_HALT)
654 && (cortex_m->nvic_dfsr & DFSR_VCATCH)) {
655 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
657 (unsigned) dcb_dhcsr,
658 (unsigned) cortex_m->nvic_dfsr);
659 cortex_m_poll(target);
660 /* FIXME restore user's vector catch config */
663 LOG_DEBUG("waiting for system reset-halt, "
664 "DHCSR 0x%08x, %d ms",
665 (unsigned) dcb_dhcsr, timeout);
674 void cortex_m_enable_breakpoints(struct target *target)
676 struct breakpoint *breakpoint = target->breakpoints;
678 /* set any pending breakpoints */
680 if (!breakpoint->set)
681 cortex_m_set_breakpoint(target, breakpoint);
682 breakpoint = breakpoint->next;
686 static int cortex_m_resume(struct target *target, int current,
687 uint32_t address, int handle_breakpoints, int debug_execution)
689 struct armv7m_common *armv7m = target_to_armv7m(target);
690 struct breakpoint *breakpoint = NULL;
694 if (target->state != TARGET_HALTED) {
695 LOG_WARNING("target not halted");
696 return ERROR_TARGET_NOT_HALTED;
699 if (!debug_execution) {
700 target_free_all_working_areas(target);
701 cortex_m_enable_breakpoints(target);
702 cortex_m_enable_watchpoints(target);
705 if (debug_execution) {
706 r = armv7m->arm.core_cache->reg_list + ARMV7M_PRIMASK;
708 /* Disable interrupts */
709 /* We disable interrupts in the PRIMASK register instead of
710 * masking with C_MASKINTS. This is probably the same issue
711 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
712 * in parallel with disabled interrupts can cause local faults
715 * REVISIT this clearly breaks non-debug execution, since the
716 * PRIMASK register state isn't saved/restored... workaround
717 * by never resuming app code after debug execution.
719 buf_set_u32(r->value, 0, 1, 1);
723 /* Make sure we are in Thumb mode */
724 r = armv7m->arm.cpsr;
725 buf_set_u32(r->value, 24, 1, 1);
730 /* current = 1: continue on current pc, otherwise continue at <address> */
733 buf_set_u32(r->value, 0, 32, address);
738 /* if we halted last time due to a bkpt instruction
739 * then we have to manually step over it, otherwise
740 * the core will break again */
742 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
744 armv7m_maybe_skip_bkpt_inst(target, NULL);
746 resume_pc = buf_get_u32(r->value, 0, 32);
748 armv7m_restore_context(target);
750 /* the front-end may request us not to handle breakpoints */
751 if (handle_breakpoints) {
752 /* Single step past breakpoint at current address */
753 breakpoint = breakpoint_find(target, resume_pc);
755 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %" PRIu32 ")",
757 breakpoint->unique_id);
758 cortex_m_unset_breakpoint(target, breakpoint);
759 cortex_m_single_step_core(target);
760 cortex_m_set_breakpoint(target, breakpoint);
765 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
767 target->debug_reason = DBG_REASON_NOTHALTED;
769 /* registers are now invalid */
770 register_cache_invalidate(armv7m->arm.core_cache);
772 if (!debug_execution) {
773 target->state = TARGET_RUNNING;
774 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
775 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
777 target->state = TARGET_DEBUG_RUNNING;
778 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
779 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
785 /* int irqstepcount = 0; */
786 static int cortex_m_step(struct target *target, int current,
787 uint32_t address, int handle_breakpoints)
789 struct cortex_m_common *cortex_m = target_to_cm(target);
790 struct armv7m_common *armv7m = &cortex_m->armv7m;
791 struct breakpoint *breakpoint = NULL;
792 struct reg *pc = armv7m->arm.pc;
793 bool bkpt_inst_found = false;
795 bool isr_timed_out = false;
797 if (target->state != TARGET_HALTED) {
798 LOG_WARNING("target not halted");
799 return ERROR_TARGET_NOT_HALTED;
802 /* current = 1: continue on current pc, otherwise continue at <address> */
804 buf_set_u32(pc->value, 0, 32, address);
806 uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
808 /* the front-end may request us not to handle breakpoints */
809 if (handle_breakpoints) {
810 breakpoint = breakpoint_find(target, pc_value);
812 cortex_m_unset_breakpoint(target, breakpoint);
815 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
817 target->debug_reason = DBG_REASON_SINGLESTEP;
819 armv7m_restore_context(target);
821 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
823 /* if no bkpt instruction is found at pc then we can perform
824 * a normal step, otherwise we have to manually step over the bkpt
825 * instruction - as such simulate a step */
826 if (bkpt_inst_found == false) {
827 /* Automatic ISR masking mode off: Just step over the next instruction */
828 if ((cortex_m->isrmasking_mode != CORTEX_M_ISRMASK_AUTO))
829 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
831 /* Process interrupts during stepping in a way they don't interfere
836 * Set a temporary break point at the current pc and let the core run
837 * with interrupts enabled. Pending interrupts get served and we run
838 * into the breakpoint again afterwards. Then we step over the next
839 * instruction with interrupts disabled.
841 * If the pending interrupts don't complete within time, we leave the
842 * core running. This may happen if the interrupts trigger faster
843 * than the core can process them or the handler doesn't return.
845 * If no more breakpoints are available we simply do a step with
846 * interrupts enabled.
852 * If a break point is already set on the lower half word then a break point on
853 * the upper half word will not break again when the core is restarted. So we
854 * just step over the instruction with interrupts disabled.
856 * The documentation has no information about this, it was found by observation
857 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
858 * suffer from this problem.
860 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
861 * address has it always cleared. The former is done to indicate thumb mode
865 if ((pc_value & 0x02) && breakpoint_find(target, pc_value & ~0x03)) {
866 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
867 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
868 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
869 /* Re-enable interrupts */
870 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
874 /* Set a temporary break point */
876 retval = cortex_m_set_breakpoint(target, breakpoint);
878 retval = breakpoint_add(target, pc_value, 2, BKPT_TYPE_BY_ADDR(pc_value));
879 bool tmp_bp_set = (retval == ERROR_OK);
881 /* No more breakpoints left, just do a step */
883 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
886 LOG_DEBUG("Starting core to serve pending interrupts");
887 int64_t t_start = timeval_ms();
888 cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
890 /* Wait for pending handlers to complete or timeout */
892 retval = mem_ap_read_atomic_u32(armv7m->debug_ap,
894 &cortex_m->dcb_dhcsr);
895 if (retval != ERROR_OK) {
896 target->state = TARGET_UNKNOWN;
899 isr_timed_out = ((timeval_ms() - t_start) > 500);
900 } while (!((cortex_m->dcb_dhcsr & S_HALT) || isr_timed_out));
902 /* only remove breakpoint if we created it */
904 cortex_m_unset_breakpoint(target, breakpoint);
906 /* Remove the temporary breakpoint */
907 breakpoint_remove(target, pc_value);
911 LOG_DEBUG("Interrupt handlers didn't complete within time, "
912 "leaving target running");
914 /* Step over next instruction with interrupts disabled */
915 cortex_m_write_debug_halt_mask(target,
918 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
919 /* Re-enable interrupts */
920 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
927 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
928 if (retval != ERROR_OK)
931 /* registers are now invalid */
932 register_cache_invalidate(armv7m->arm.core_cache);
935 cortex_m_set_breakpoint(target, breakpoint);
938 /* Leave the core running. The user has to stop execution manually. */
939 target->debug_reason = DBG_REASON_NOTHALTED;
940 target->state = TARGET_RUNNING;
944 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
945 " nvic_icsr = 0x%" PRIx32,
946 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
948 retval = cortex_m_debug_entry(target);
949 if (retval != ERROR_OK)
951 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
953 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
954 " nvic_icsr = 0x%" PRIx32,
955 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
960 static int cortex_m_assert_reset(struct target *target)
962 struct cortex_m_common *cortex_m = target_to_cm(target);
963 struct armv7m_common *armv7m = &cortex_m->armv7m;
964 enum cortex_m_soft_reset_config reset_config = cortex_m->soft_reset_config;
966 LOG_DEBUG("target->state: %s",
967 target_state_name(target));
969 enum reset_types jtag_reset_config = jtag_get_reset_config();
971 if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
972 /* allow scripts to override the reset event */
974 target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
975 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
976 target->state = TARGET_RESET;
981 /* some cores support connecting while srst is asserted
982 * use that mode is it has been configured */
984 bool srst_asserted = false;
986 if ((jtag_reset_config & RESET_HAS_SRST) &&
987 (jtag_reset_config & RESET_SRST_NO_GATING)) {
988 adapter_assert_reset();
989 srst_asserted = true;
992 /* Enable debug requests */
994 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
995 /* Store important errors instead of failing and proceed to reset assert */
997 if (retval != ERROR_OK || !(cortex_m->dcb_dhcsr & C_DEBUGEN))
998 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_DEBUGEN);
1000 /* If the processor is sleeping in a WFI or WFE instruction, the
1001 * C_HALT bit must be asserted to regain control */
1002 if (retval == ERROR_OK && (cortex_m->dcb_dhcsr & S_SLEEP))
1003 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_HALT | C_DEBUGEN);
1005 mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
1006 /* Ignore less important errors */
1008 if (!target->reset_halt) {
1009 /* Set/Clear C_MASKINTS in a separate operation */
1010 if (cortex_m->dcb_dhcsr & C_MASKINTS)
1011 mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
1012 DBGKEY | C_DEBUGEN | C_HALT);
1014 /* clear any debug flags before resuming */
1015 cortex_m_clear_halt(target);
1017 /* clear C_HALT in dhcsr reg */
1018 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
1020 /* Halt in debug on reset; endreset_event() restores DEMCR.
1022 * REVISIT catching BUSERR presumably helps to defend against
1023 * bad vector table entries. Should this include MMERR or
1027 retval2 = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DEMCR,
1028 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
1029 if (retval != ERROR_OK || retval2 != ERROR_OK)
1030 LOG_INFO("AP write error, reset will not halt");
1033 if (jtag_reset_config & RESET_HAS_SRST) {
1034 /* default to asserting srst */
1036 adapter_assert_reset();
1038 /* srst is asserted, ignore AP access errors */
1041 /* Use a standard Cortex-M3 software reset mechanism.
1042 * We default to using VECRESET as it is supported on all current cores.
1043 * This has the disadvantage of not resetting the peripherals, so a
1044 * reset-init event handler is needed to perform any peripheral resets.
1046 LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ)
1047 ? "SYSRESETREQ" : "VECTRESET");
1049 if (reset_config == CORTEX_M_RESET_VECTRESET) {
1050 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1051 "handler to reset any peripherals or configure hardware srst support.");
1055 retval3 = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
1056 AIRCR_VECTKEY | ((reset_config == CORTEX_M_RESET_SYSRESETREQ)
1057 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1058 if (retval3 != ERROR_OK)
1059 LOG_DEBUG("Ignoring AP write error right after reset");
1061 retval3 = dap_dp_init(armv7m->debug_ap->dap);
1062 if (retval3 != ERROR_OK)
1063 LOG_ERROR("DP initialisation failed");
1066 /* I do not know why this is necessary, but it
1067 * fixes strange effects (step/resume cause NMI
1068 * after reset) on LM3S6918 -- Michael Schwingen
1071 mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_AIRCR, &tmp);
1075 target->state = TARGET_RESET;
1076 jtag_add_sleep(50000);
1078 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
1080 /* now return stored error code if any */
1081 if (retval != ERROR_OK)
1084 if (target->reset_halt) {
1085 retval = target_halt(target);
1086 if (retval != ERROR_OK)
1093 static int cortex_m_deassert_reset(struct target *target)
1095 struct armv7m_common *armv7m = &target_to_cm(target)->armv7m;
1097 LOG_DEBUG("target->state: %s",
1098 target_state_name(target));
1100 /* deassert reset lines */
1101 adapter_deassert_reset();
1103 enum reset_types jtag_reset_config = jtag_get_reset_config();
1105 if ((jtag_reset_config & RESET_HAS_SRST) &&
1106 !(jtag_reset_config & RESET_SRST_NO_GATING)) {
1107 int retval = dap_dp_init(armv7m->debug_ap->dap);
1108 if (retval != ERROR_OK) {
1109 LOG_ERROR("DP initialisation failed");
1117 int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1121 struct cortex_m_common *cortex_m = target_to_cm(target);
1122 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1124 if (breakpoint->set) {
1125 LOG_WARNING("breakpoint (BPID: %" PRIu32 ") already set", breakpoint->unique_id);
1129 if (cortex_m->auto_bp_type)
1130 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1132 if (breakpoint->type == BKPT_HARD) {
1133 uint32_t fpcr_value;
1134 while (comparator_list[fp_num].used && (fp_num < cortex_m->fp_num_code))
1136 if (fp_num >= cortex_m->fp_num_code) {
1137 LOG_ERROR("Can not find free FPB Comparator!");
1140 breakpoint->set = fp_num + 1;
1141 fpcr_value = breakpoint->address | 1;
1142 if (cortex_m->fp_rev == 0) {
1144 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1145 fpcr_value = (fpcr_value & 0x1FFFFFFC) | hilo | 1;
1146 } else if (cortex_m->fp_rev > 1) {
1147 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1150 comparator_list[fp_num].used = 1;
1151 comparator_list[fp_num].fpcr_value = fpcr_value;
1152 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1153 comparator_list[fp_num].fpcr_value);
1154 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "",
1156 comparator_list[fp_num].fpcr_value);
1157 if (!cortex_m->fpb_enabled) {
1158 LOG_DEBUG("FPB wasn't enabled, do it now");
1159 retval = cortex_m_enable_fpb(target);
1160 if (retval != ERROR_OK) {
1161 LOG_ERROR("Failed to enable the FPB");
1165 cortex_m->fpb_enabled = 1;
1167 } else if (breakpoint->type == BKPT_SOFT) {
1170 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1171 * semihosting; don't use that. Otherwise the BKPT
1172 * parameter is arbitrary.
1174 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1175 retval = target_read_memory(target,
1176 breakpoint->address & 0xFFFFFFFE,
1177 breakpoint->length, 1,
1178 breakpoint->orig_instr);
1179 if (retval != ERROR_OK)
1181 retval = target_write_memory(target,
1182 breakpoint->address & 0xFFFFFFFE,
1183 breakpoint->length, 1,
1185 if (retval != ERROR_OK)
1187 breakpoint->set = true;
1190 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1191 breakpoint->unique_id,
1192 (int)(breakpoint->type),
1193 breakpoint->address,
1200 int cortex_m_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1203 struct cortex_m_common *cortex_m = target_to_cm(target);
1204 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1206 if (!breakpoint->set) {
1207 LOG_WARNING("breakpoint not set");
1211 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1212 breakpoint->unique_id,
1213 (int)(breakpoint->type),
1214 breakpoint->address,
1218 if (breakpoint->type == BKPT_HARD) {
1219 int fp_num = breakpoint->set - 1;
1220 if ((fp_num < 0) || (fp_num >= cortex_m->fp_num_code)) {
1221 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1224 comparator_list[fp_num].used = 0;
1225 comparator_list[fp_num].fpcr_value = 0;
1226 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1227 comparator_list[fp_num].fpcr_value);
1229 /* restore original instruction (kept in target endianness) */
1230 if (breakpoint->length == 4) {
1231 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1,
1232 breakpoint->orig_instr);
1233 if (retval != ERROR_OK)
1236 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1,
1237 breakpoint->orig_instr);
1238 if (retval != ERROR_OK)
1242 breakpoint->set = false;
1247 int cortex_m_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1249 struct cortex_m_common *cortex_m = target_to_cm(target);
1251 if (cortex_m->auto_bp_type)
1252 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1254 if (breakpoint->type != BKPT_TYPE_BY_ADDR(breakpoint->address)) {
1255 if (breakpoint->type == BKPT_HARD) {
1256 LOG_INFO("flash patch comparator requested outside code memory region");
1257 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1260 if (breakpoint->type == BKPT_SOFT) {
1261 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1262 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1266 if ((breakpoint->type == BKPT_HARD) && (cortex_m->fp_code_available < 1)) {
1267 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1268 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1271 if (breakpoint->length == 3) {
1272 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1273 breakpoint->length = 2;
1276 if ((breakpoint->length != 2)) {
1277 LOG_INFO("only breakpoints of two bytes length supported");
1278 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1281 if (breakpoint->type == BKPT_HARD)
1282 cortex_m->fp_code_available--;
1284 return cortex_m_set_breakpoint(target, breakpoint);
1287 int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1289 struct cortex_m_common *cortex_m = target_to_cm(target);
1291 /* REVISIT why check? FBP can be updated with core running ... */
1292 if (target->state != TARGET_HALTED) {
1293 LOG_WARNING("target not halted");
1294 return ERROR_TARGET_NOT_HALTED;
1297 if (cortex_m->auto_bp_type)
1298 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1300 if (breakpoint->set)
1301 cortex_m_unset_breakpoint(target, breakpoint);
1303 if (breakpoint->type == BKPT_HARD)
1304 cortex_m->fp_code_available++;
1309 int cortex_m_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1312 uint32_t mask, temp;
1313 struct cortex_m_common *cortex_m = target_to_cm(target);
1315 /* watchpoint params were validated earlier */
1317 temp = watchpoint->length;
1324 /* REVISIT Don't fully trust these "not used" records ... users
1325 * may set up breakpoints by hand, e.g. dual-address data value
1326 * watchpoint using comparator #1; comparator #0 matching cycle
1327 * count; send data trace info through ITM and TPIU; etc
1329 struct cortex_m_dwt_comparator *comparator;
1331 for (comparator = cortex_m->dwt_comparator_list;
1332 comparator->used && dwt_num < cortex_m->dwt_num_comp;
1333 comparator++, dwt_num++)
1335 if (dwt_num >= cortex_m->dwt_num_comp) {
1336 LOG_ERROR("Can not find free DWT Comparator");
1339 comparator->used = 1;
1340 watchpoint->set = dwt_num + 1;
1342 comparator->comp = watchpoint->address;
1343 target_write_u32(target, comparator->dwt_comparator_address + 0,
1346 comparator->mask = mask;
1347 target_write_u32(target, comparator->dwt_comparator_address + 4,
1350 switch (watchpoint->rw) {
1352 comparator->function = 5;
1355 comparator->function = 6;
1358 comparator->function = 7;
1361 target_write_u32(target, comparator->dwt_comparator_address + 8,
1362 comparator->function);
1364 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1365 watchpoint->unique_id, dwt_num,
1366 (unsigned) comparator->comp,
1367 (unsigned) comparator->mask,
1368 (unsigned) comparator->function);
1372 int cortex_m_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1374 struct cortex_m_common *cortex_m = target_to_cm(target);
1375 struct cortex_m_dwt_comparator *comparator;
1378 if (!watchpoint->set) {
1379 LOG_WARNING("watchpoint (wpid: %d) not set",
1380 watchpoint->unique_id);
1384 dwt_num = watchpoint->set - 1;
1386 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1387 watchpoint->unique_id, dwt_num,
1388 (unsigned) watchpoint->address);
1390 if ((dwt_num < 0) || (dwt_num >= cortex_m->dwt_num_comp)) {
1391 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1395 comparator = cortex_m->dwt_comparator_list + dwt_num;
1396 comparator->used = 0;
1397 comparator->function = 0;
1398 target_write_u32(target, comparator->dwt_comparator_address + 8,
1399 comparator->function);
1401 watchpoint->set = false;
1406 int cortex_m_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1408 struct cortex_m_common *cortex_m = target_to_cm(target);
1410 if (cortex_m->dwt_comp_available < 1) {
1411 LOG_DEBUG("no comparators?");
1412 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1415 /* hardware doesn't support data value masking */
1416 if (watchpoint->mask != ~(uint32_t)0) {
1417 LOG_DEBUG("watchpoint value masks not supported");
1418 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1421 /* hardware allows address masks of up to 32K */
1424 for (mask = 0; mask < 16; mask++) {
1425 if ((1u << mask) == watchpoint->length)
1429 LOG_DEBUG("unsupported watchpoint length");
1430 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1432 if (watchpoint->address & ((1 << mask) - 1)) {
1433 LOG_DEBUG("watchpoint address is unaligned");
1434 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1437 /* Caller doesn't seem to be able to describe watching for data
1438 * values of zero; that flags "no value".
1440 * REVISIT This DWT may well be able to watch for specific data
1441 * values. Requires comparator #1 to set DATAVMATCH and match
1442 * the data, and another comparator (DATAVADDR0) matching addr.
1444 if (watchpoint->value) {
1445 LOG_DEBUG("data value watchpoint not YET supported");
1446 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1449 cortex_m->dwt_comp_available--;
1450 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1455 int cortex_m_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1457 struct cortex_m_common *cortex_m = target_to_cm(target);
1459 /* REVISIT why check? DWT can be updated with core running ... */
1460 if (target->state != TARGET_HALTED) {
1461 LOG_WARNING("target not halted");
1462 return ERROR_TARGET_NOT_HALTED;
1465 if (watchpoint->set)
1466 cortex_m_unset_watchpoint(target, watchpoint);
1468 cortex_m->dwt_comp_available++;
1469 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1474 void cortex_m_enable_watchpoints(struct target *target)
1476 struct watchpoint *watchpoint = target->watchpoints;
1478 /* set any pending watchpoints */
1479 while (watchpoint) {
1480 if (!watchpoint->set)
1481 cortex_m_set_watchpoint(target, watchpoint);
1482 watchpoint = watchpoint->next;
1486 static int cortex_m_load_core_reg_u32(struct target *target,
1487 uint32_t num, uint32_t *value)
1491 /* NOTE: we "know" here that the register identifiers used
1492 * in the v7m header match the Cortex-M3 Debug Core Register
1493 * Selector values for R0..R15, xPSR, MSP, and PSP.
1497 /* read a normal core register */
1498 retval = cortexm_dap_read_coreregister_u32(target, value, num);
1500 if (retval != ERROR_OK) {
1501 LOG_ERROR("JTAG failure %i", retval);
1502 return ERROR_JTAG_DEVICE_ERROR;
1504 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "", (int)num, *value);
1508 /* Floating-point Status and Registers */
1509 retval = target_write_u32(target, DCB_DCRSR, 0x21);
1510 if (retval != ERROR_OK)
1512 retval = target_read_u32(target, DCB_DCRDR, value);
1513 if (retval != ERROR_OK)
1515 LOG_DEBUG("load from FPSCR value 0x%" PRIx32, *value);
1518 case ARMV7M_S0 ... ARMV7M_S31:
1519 /* Floating-point Status and Registers */
1520 retval = target_write_u32(target, DCB_DCRSR, num - ARMV7M_S0 + 0x40);
1521 if (retval != ERROR_OK)
1523 retval = target_read_u32(target, DCB_DCRDR, value);
1524 if (retval != ERROR_OK)
1526 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32,
1527 (int)(num - ARMV7M_S0), *value);
1530 case ARMV7M_PRIMASK:
1531 case ARMV7M_BASEPRI:
1532 case ARMV7M_FAULTMASK:
1533 case ARMV7M_CONTROL:
1534 /* Cortex-M3 packages these four registers as bitfields
1535 * in one Debug Core register. So say r0 and r2 docs;
1536 * it was removed from r1 docs, but still works.
1538 cortexm_dap_read_coreregister_u32(target, value, 20);
1541 case ARMV7M_PRIMASK:
1542 *value = buf_get_u32((uint8_t *)value, 0, 1);
1545 case ARMV7M_BASEPRI:
1546 *value = buf_get_u32((uint8_t *)value, 8, 8);
1549 case ARMV7M_FAULTMASK:
1550 *value = buf_get_u32((uint8_t *)value, 16, 1);
1553 case ARMV7M_CONTROL:
1554 *value = buf_get_u32((uint8_t *)value, 24, 2);
1558 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1562 return ERROR_COMMAND_SYNTAX_ERROR;
1568 static int cortex_m_store_core_reg_u32(struct target *target,
1569 uint32_t num, uint32_t value)
1573 struct armv7m_common *armv7m = target_to_armv7m(target);
1575 /* NOTE: we "know" here that the register identifiers used
1576 * in the v7m header match the Cortex-M3 Debug Core Register
1577 * Selector values for R0..R15, xPSR, MSP, and PSP.
1581 retval = cortexm_dap_write_coreregister_u32(target, value, num);
1582 if (retval != ERROR_OK) {
1585 LOG_ERROR("JTAG failure");
1586 r = armv7m->arm.core_cache->reg_list + num;
1587 r->dirty = r->valid;
1588 return ERROR_JTAG_DEVICE_ERROR;
1590 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1594 /* Floating-point Status and Registers */
1595 retval = target_write_u32(target, DCB_DCRDR, value);
1596 if (retval != ERROR_OK)
1598 retval = target_write_u32(target, DCB_DCRSR, 0x21 | (1<<16));
1599 if (retval != ERROR_OK)
1601 LOG_DEBUG("write FPSCR value 0x%" PRIx32, value);
1604 case ARMV7M_S0 ... ARMV7M_S31:
1605 /* Floating-point Status and Registers */
1606 retval = target_write_u32(target, DCB_DCRDR, value);
1607 if (retval != ERROR_OK)
1609 retval = target_write_u32(target, DCB_DCRSR, (num - ARMV7M_S0 + 0x40) | (1<<16));
1610 if (retval != ERROR_OK)
1612 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32,
1613 (int)(num - ARMV7M_S0), value);
1616 case ARMV7M_PRIMASK:
1617 case ARMV7M_BASEPRI:
1618 case ARMV7M_FAULTMASK:
1619 case ARMV7M_CONTROL:
1620 /* Cortex-M3 packages these four registers as bitfields
1621 * in one Debug Core register. So say r0 and r2 docs;
1622 * it was removed from r1 docs, but still works.
1624 cortexm_dap_read_coreregister_u32(target, ®, 20);
1627 case ARMV7M_PRIMASK:
1628 buf_set_u32((uint8_t *)®, 0, 1, value);
1631 case ARMV7M_BASEPRI:
1632 buf_set_u32((uint8_t *)®, 8, 8, value);
1635 case ARMV7M_FAULTMASK:
1636 buf_set_u32((uint8_t *)®, 16, 1, value);
1639 case ARMV7M_CONTROL:
1640 buf_set_u32((uint8_t *)®, 24, 2, value);
1644 cortexm_dap_write_coreregister_u32(target, reg, 20);
1646 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1650 return ERROR_COMMAND_SYNTAX_ERROR;
1656 static int cortex_m_read_memory(struct target *target, uint32_t address,
1657 uint32_t size, uint32_t count, uint8_t *buffer)
1659 struct armv7m_common *armv7m = target_to_armv7m(target);
1661 if (armv7m->arm.is_armv6m) {
1662 /* armv6m does not handle unaligned memory access */
1663 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1664 return ERROR_TARGET_UNALIGNED_ACCESS;
1667 return mem_ap_read_buf(armv7m->debug_ap, buffer, size, count, address);
1670 static int cortex_m_write_memory(struct target *target, uint32_t address,
1671 uint32_t size, uint32_t count, const uint8_t *buffer)
1673 struct armv7m_common *armv7m = target_to_armv7m(target);
1675 if (armv7m->arm.is_armv6m) {
1676 /* armv6m does not handle unaligned memory access */
1677 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1678 return ERROR_TARGET_UNALIGNED_ACCESS;
1681 return mem_ap_write_buf(armv7m->debug_ap, buffer, size, count, address);
1684 static int cortex_m_init_target(struct command_context *cmd_ctx,
1685 struct target *target)
1687 armv7m_build_reg_cache(target);
1691 void cortex_m_deinit_target(struct target *target)
1693 struct cortex_m_common *cortex_m = target_to_cm(target);
1695 free(cortex_m->fp_comparator_list);
1697 cortex_m_dwt_free(target);
1698 armv7m_free_reg_cache(target);
1703 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1704 * on r/w if the core is not running, and clear on resume or reset ... or
1705 * at least, in a post_restore_context() method.
1708 struct dwt_reg_state {
1709 struct target *target;
1711 uint8_t value[4]; /* scratch/cache */
1714 static int cortex_m_dwt_get_reg(struct reg *reg)
1716 struct dwt_reg_state *state = reg->arch_info;
1719 int retval = target_read_u32(state->target, state->addr, &tmp);
1720 if (retval != ERROR_OK)
1723 buf_set_u32(state->value, 0, 32, tmp);
1727 static int cortex_m_dwt_set_reg(struct reg *reg, uint8_t *buf)
1729 struct dwt_reg_state *state = reg->arch_info;
1731 return target_write_u32(state->target, state->addr,
1732 buf_get_u32(buf, 0, reg->size));
1741 static struct dwt_reg dwt_base_regs[] = {
1742 { DWT_CTRL, "dwt_ctrl", 32, },
1743 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1744 * increments while the core is asleep.
1746 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1747 /* plus some 8 bit counters, useful for profiling with TPIU */
1750 static struct dwt_reg dwt_comp[] = {
1751 #define DWT_COMPARATOR(i) \
1752 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1753 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1754 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1759 #undef DWT_COMPARATOR
1762 static const struct reg_arch_type dwt_reg_type = {
1763 .get = cortex_m_dwt_get_reg,
1764 .set = cortex_m_dwt_set_reg,
1767 static void cortex_m_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
1769 struct dwt_reg_state *state;
1771 state = calloc(1, sizeof *state);
1774 state->addr = d->addr;
1779 r->value = state->value;
1780 r->arch_info = state;
1781 r->type = &dwt_reg_type;
1784 void cortex_m_dwt_setup(struct cortex_m_common *cm, struct target *target)
1787 struct reg_cache *cache;
1788 struct cortex_m_dwt_comparator *comparator;
1791 target_read_u32(target, DWT_CTRL, &dwtcr);
1793 LOG_DEBUG("no DWT");
1797 cm->dwt_num_comp = (dwtcr >> 28) & 0xF;
1798 cm->dwt_comp_available = cm->dwt_num_comp;
1799 cm->dwt_comparator_list = calloc(cm->dwt_num_comp,
1800 sizeof(struct cortex_m_dwt_comparator));
1801 if (!cm->dwt_comparator_list) {
1803 cm->dwt_num_comp = 0;
1804 LOG_ERROR("out of mem");
1808 cache = calloc(1, sizeof *cache);
1811 free(cm->dwt_comparator_list);
1814 cache->name = "Cortex-M DWT registers";
1815 cache->num_regs = 2 + cm->dwt_num_comp * 3;
1816 cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
1817 if (!cache->reg_list) {
1822 for (reg = 0; reg < 2; reg++)
1823 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1824 dwt_base_regs + reg);
1826 comparator = cm->dwt_comparator_list;
1827 for (i = 0; i < cm->dwt_num_comp; i++, comparator++) {
1830 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
1831 for (j = 0; j < 3; j++, reg++)
1832 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1833 dwt_comp + 3 * i + j);
1835 /* make sure we clear any watchpoints enabled on the target */
1836 target_write_u32(target, comparator->dwt_comparator_address + 8, 0);
1839 *register_get_last_cache_p(&target->reg_cache) = cache;
1840 cm->dwt_cache = cache;
1842 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
1843 dwtcr, cm->dwt_num_comp,
1844 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
1846 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1847 * implement single-address data value watchpoints ... so we
1848 * won't need to check it later, when asked to set one up.
1852 static void cortex_m_dwt_free(struct target *target)
1854 struct cortex_m_common *cm = target_to_cm(target);
1855 struct reg_cache *cache = cm->dwt_cache;
1857 free(cm->dwt_comparator_list);
1858 cm->dwt_comparator_list = NULL;
1859 cm->dwt_num_comp = 0;
1862 register_unlink_cache(&target->reg_cache, cache);
1864 if (cache->reg_list) {
1865 for (size_t i = 0; i < cache->num_regs; i++)
1866 free(cache->reg_list[i].arch_info);
1867 free(cache->reg_list);
1871 cm->dwt_cache = NULL;
1874 #define MVFR0 0xe000ef40
1875 #define MVFR1 0xe000ef44
1877 #define MVFR0_DEFAULT_M4 0x10110021
1878 #define MVFR1_DEFAULT_M4 0x11000011
1880 int cortex_m_examine(struct target *target)
1883 uint32_t cpuid, fpcr, mvfr0, mvfr1;
1885 struct cortex_m_common *cortex_m = target_to_cm(target);
1886 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
1887 struct armv7m_common *armv7m = target_to_armv7m(target);
1889 /* stlink shares the examine handler but does not support
1891 if (!armv7m->stlink) {
1892 retval = dap_dp_init(swjdp);
1893 if (retval != ERROR_OK) {
1894 LOG_ERROR("Could not initialize the debug port");
1898 /* Search for the MEM-AP */
1899 retval = dap_find_ap(swjdp, AP_TYPE_AHB_AP, &armv7m->debug_ap);
1900 if (retval != ERROR_OK) {
1901 LOG_ERROR("Could not find MEM-AP to control the core");
1905 /* Leave (only) generic DAP stuff for debugport_init(); */
1906 armv7m->debug_ap->memaccess_tck = 8;
1908 retval = mem_ap_init(armv7m->debug_ap);
1909 if (retval != ERROR_OK)
1913 if (!target_was_examined(target)) {
1914 target_set_examined(target);
1916 /* Read from Device Identification Registers */
1917 retval = target_read_u32(target, CPUID, &cpuid);
1918 if (retval != ERROR_OK)
1922 i = (cpuid >> 4) & 0xf;
1924 LOG_DEBUG("Cortex-M%d r%" PRId8 "p%" PRId8 " processor detected",
1925 i, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
1928 rev = (cpuid >> 20) & 0xf;
1929 patch = (cpuid >> 0) & 0xf;
1930 if ((rev == 0) && (patch < 2))
1931 LOG_WARNING("Silicon bug: single stepping will enter pending exception handler!");
1933 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
1935 /* test for floating point feature on Cortex-M4 */
1937 target_read_u32(target, MVFR0, &mvfr0);
1938 target_read_u32(target, MVFR1, &mvfr1);
1940 if ((mvfr0 == MVFR0_DEFAULT_M4) && (mvfr1 == MVFR1_DEFAULT_M4)) {
1941 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i);
1942 armv7m->fp_feature = FPv4_SP;
1944 } else if (i == 0) {
1945 /* Cortex-M0 does not support unaligned memory access */
1946 armv7m->arm.is_armv6m = true;
1949 if (armv7m->fp_feature != FPv4_SP &&
1950 armv7m->arm.core_cache->num_regs > ARMV7M_NUM_CORE_REGS_NOFP) {
1951 /* free unavailable FPU registers */
1954 for (idx = ARMV7M_NUM_CORE_REGS_NOFP;
1955 idx < armv7m->arm.core_cache->num_regs;
1957 free(armv7m->arm.core_cache->reg_list[idx].value);
1958 free(armv7m->arm.core_cache->reg_list[idx].feature);
1959 free(armv7m->arm.core_cache->reg_list[idx].reg_data_type);
1961 armv7m->arm.core_cache->num_regs = ARMV7M_NUM_CORE_REGS_NOFP;
1964 if ((i == 4 || i == 3) && !armv7m->stlink) {
1965 /* Cortex-M3/M4 has 4096 bytes autoincrement range */
1966 armv7m->debug_ap->tar_autoincr_block = (1 << 12);
1969 /* Configure trace modules */
1970 retval = target_write_u32(target, DCB_DEMCR, TRCENA | armv7m->demcr);
1971 if (retval != ERROR_OK)
1974 if (armv7m->trace_config.config_type != DISABLED) {
1975 armv7m_trace_tpiu_config(target);
1976 armv7m_trace_itm_config(target);
1979 /* NOTE: FPB and DWT are both optional. */
1982 target_read_u32(target, FP_CTRL, &fpcr);
1983 cortex_m->auto_bp_type = 1;
1984 /* bits [14:12] and [7:4] */
1985 cortex_m->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF);
1986 cortex_m->fp_num_lit = (fpcr >> 8) & 0xF;
1987 cortex_m->fp_code_available = cortex_m->fp_num_code;
1988 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
1989 Revision is zero base, fp_rev == 1 means Rev.2 ! */
1990 cortex_m->fp_rev = (fpcr >> 28) & 0xf;
1991 free(cortex_m->fp_comparator_list);
1992 cortex_m->fp_comparator_list = calloc(
1993 cortex_m->fp_num_code + cortex_m->fp_num_lit,
1994 sizeof(struct cortex_m_fp_comparator));
1995 cortex_m->fpb_enabled = fpcr & 1;
1996 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
1997 cortex_m->fp_comparator_list[i].type =
1998 (i < cortex_m->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
1999 cortex_m->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
2001 /* make sure we clear any breakpoints enabled on the target */
2002 target_write_u32(target, cortex_m->fp_comparator_list[i].fpcr_address, 0);
2004 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i",
2006 cortex_m->fp_num_code,
2007 cortex_m->fp_num_lit);
2010 cortex_m_dwt_free(target);
2011 cortex_m_dwt_setup(cortex_m, target);
2013 /* These hardware breakpoints only work for code in flash! */
2014 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2015 target_name(target),
2016 cortex_m->fp_num_code,
2017 cortex_m->dwt_num_comp);
2023 static int cortex_m_dcc_read(struct target *target, uint8_t *value, uint8_t *ctrl)
2025 struct armv7m_common *armv7m = target_to_armv7m(target);
2030 retval = mem_ap_read_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2031 if (retval != ERROR_OK)
2034 dcrdr = target_buffer_get_u16(target, buf);
2035 *ctrl = (uint8_t)dcrdr;
2036 *value = (uint8_t)(dcrdr >> 8);
2038 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
2040 /* write ack back to software dcc register
2041 * signify we have read data */
2042 if (dcrdr & (1 << 0)) {
2043 target_buffer_set_u16(target, buf, 0);
2044 retval = mem_ap_write_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2045 if (retval != ERROR_OK)
2052 static int cortex_m_target_request_data(struct target *target,
2053 uint32_t size, uint8_t *buffer)
2059 for (i = 0; i < (size * 4); i++) {
2060 int retval = cortex_m_dcc_read(target, &data, &ctrl);
2061 if (retval != ERROR_OK)
2069 static int cortex_m_handle_target_request(void *priv)
2071 struct target *target = priv;
2072 if (!target_was_examined(target))
2075 if (!target->dbg_msg_enabled)
2078 if (target->state == TARGET_RUNNING) {
2083 retval = cortex_m_dcc_read(target, &data, &ctrl);
2084 if (retval != ERROR_OK)
2087 /* check if we have data */
2088 if (ctrl & (1 << 0)) {
2091 /* we assume target is quick enough */
2093 for (int i = 1; i <= 3; i++) {
2094 retval = cortex_m_dcc_read(target, &data, &ctrl);
2095 if (retval != ERROR_OK)
2097 request |= ((uint32_t)data << (i * 8));
2099 target_request(target, request);
2106 static int cortex_m_init_arch_info(struct target *target,
2107 struct cortex_m_common *cortex_m, struct jtag_tap *tap)
2109 struct armv7m_common *armv7m = &cortex_m->armv7m;
2111 armv7m_init_arch_info(target, armv7m);
2113 /* tap has no dap initialized */
2115 tap->dap = dap_init();
2117 /* Leave (only) generic DAP stuff for debugport_init() */
2118 tap->dap->tap = tap;
2121 /* default reset mode is to use srst if fitted
2122 * if not it will use CORTEX_M3_RESET_VECTRESET */
2123 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2125 armv7m->arm.dap = tap->dap;
2127 /* register arch-specific functions */
2128 armv7m->examine_debug_reason = cortex_m_examine_debug_reason;
2130 armv7m->post_debug_entry = NULL;
2132 armv7m->pre_restore_context = NULL;
2134 armv7m->load_core_reg_u32 = cortex_m_load_core_reg_u32;
2135 armv7m->store_core_reg_u32 = cortex_m_store_core_reg_u32;
2137 target_register_timer_callback(cortex_m_handle_target_request, 1, 1, target);
2142 static int cortex_m_target_create(struct target *target, Jim_Interp *interp)
2144 struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common));
2146 cortex_m->common_magic = CORTEX_M_COMMON_MAGIC;
2147 cortex_m_init_arch_info(target, cortex_m, target->tap);
2152 /*--------------------------------------------------------------------------*/
2154 static int cortex_m_verify_pointer(struct command_context *cmd_ctx,
2155 struct cortex_m_common *cm)
2157 if (cm->common_magic != CORTEX_M_COMMON_MAGIC) {
2158 command_print(cmd_ctx, "target is not a Cortex-M");
2159 return ERROR_TARGET_INVALID;
2165 * Only stuff below this line should need to verify that its target
2166 * is a Cortex-M3. Everything else should have indirected through the
2167 * cortexm3_target structure, which is only used with CM3 targets.
2170 static const struct {
2174 { "hard_err", VC_HARDERR, },
2175 { "int_err", VC_INTERR, },
2176 { "bus_err", VC_BUSERR, },
2177 { "state_err", VC_STATERR, },
2178 { "chk_err", VC_CHKERR, },
2179 { "nocp_err", VC_NOCPERR, },
2180 { "mm_err", VC_MMERR, },
2181 { "reset", VC_CORERESET, },
2184 COMMAND_HANDLER(handle_cortex_m_vector_catch_command)
2186 struct target *target = get_current_target(CMD_CTX);
2187 struct cortex_m_common *cortex_m = target_to_cm(target);
2188 struct armv7m_common *armv7m = &cortex_m->armv7m;
2192 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2193 if (retval != ERROR_OK)
2196 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2197 if (retval != ERROR_OK)
2203 if (CMD_ARGC == 1) {
2204 if (strcmp(CMD_ARGV[0], "all") == 0) {
2205 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2206 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2207 | VC_MMERR | VC_CORERESET;
2209 } else if (strcmp(CMD_ARGV[0], "none") == 0)
2212 while (CMD_ARGC-- > 0) {
2214 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2215 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2217 catch |= vec_ids[i].mask;
2220 if (i == ARRAY_SIZE(vec_ids)) {
2221 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2222 return ERROR_COMMAND_SYNTAX_ERROR;
2226 /* For now, armv7m->demcr only stores vector catch flags. */
2227 armv7m->demcr = catch;
2232 /* write, but don't assume it stuck (why not??) */
2233 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, demcr);
2234 if (retval != ERROR_OK)
2236 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2237 if (retval != ERROR_OK)
2240 /* FIXME be sure to clear DEMCR on clean server shutdown.
2241 * Otherwise the vector catch hardware could fire when there's
2242 * no debugger hooked up, causing much confusion...
2246 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2247 command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
2248 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2254 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command)
2256 struct target *target = get_current_target(CMD_CTX);
2257 struct cortex_m_common *cortex_m = target_to_cm(target);
2260 static const Jim_Nvp nvp_maskisr_modes[] = {
2261 { .name = "auto", .value = CORTEX_M_ISRMASK_AUTO },
2262 { .name = "off", .value = CORTEX_M_ISRMASK_OFF },
2263 { .name = "on", .value = CORTEX_M_ISRMASK_ON },
2264 { .name = NULL, .value = -1 },
2269 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2270 if (retval != ERROR_OK)
2273 if (target->state != TARGET_HALTED) {
2274 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
2279 n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
2280 if (n->name == NULL)
2281 return ERROR_COMMAND_SYNTAX_ERROR;
2282 cortex_m->isrmasking_mode = n->value;
2285 if (cortex_m->isrmasking_mode == CORTEX_M_ISRMASK_ON)
2286 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
2288 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
2291 n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
2292 command_print(CMD_CTX, "cortex_m interrupt mask %s", n->name);
2297 COMMAND_HANDLER(handle_cortex_m_reset_config_command)
2299 struct target *target = get_current_target(CMD_CTX);
2300 struct cortex_m_common *cortex_m = target_to_cm(target);
2304 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2305 if (retval != ERROR_OK)
2309 if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
2310 cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ;
2311 else if (strcmp(*CMD_ARGV, "vectreset") == 0)
2312 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2315 switch (cortex_m->soft_reset_config) {
2316 case CORTEX_M_RESET_SYSRESETREQ:
2317 reset_config = "sysresetreq";
2320 case CORTEX_M_RESET_VECTRESET:
2321 reset_config = "vectreset";
2325 reset_config = "unknown";
2329 command_print(CMD_CTX, "cortex_m reset_config %s", reset_config);
2334 static const struct command_registration cortex_m_exec_command_handlers[] = {
2337 .handler = handle_cortex_m_mask_interrupts_command,
2338 .mode = COMMAND_EXEC,
2339 .help = "mask cortex_m interrupts",
2340 .usage = "['auto'|'on'|'off']",
2343 .name = "vector_catch",
2344 .handler = handle_cortex_m_vector_catch_command,
2345 .mode = COMMAND_EXEC,
2346 .help = "configure hardware vectors to trigger debug entry",
2347 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2350 .name = "reset_config",
2351 .handler = handle_cortex_m_reset_config_command,
2352 .mode = COMMAND_ANY,
2353 .help = "configure software reset handling",
2354 .usage = "['srst'|'sysresetreq'|'vectreset']",
2356 COMMAND_REGISTRATION_DONE
2358 static const struct command_registration cortex_m_command_handlers[] = {
2360 .chain = armv7m_command_handlers,
2363 .chain = armv7m_trace_command_handlers,
2367 .mode = COMMAND_EXEC,
2368 .help = "Cortex-M command group",
2370 .chain = cortex_m_exec_command_handlers,
2372 COMMAND_REGISTRATION_DONE
2375 struct target_type cortexm_target = {
2377 .deprecated_name = "cortex_m3",
2379 .poll = cortex_m_poll,
2380 .arch_state = armv7m_arch_state,
2382 .target_request_data = cortex_m_target_request_data,
2384 .halt = cortex_m_halt,
2385 .resume = cortex_m_resume,
2386 .step = cortex_m_step,
2388 .assert_reset = cortex_m_assert_reset,
2389 .deassert_reset = cortex_m_deassert_reset,
2390 .soft_reset_halt = cortex_m_soft_reset_halt,
2392 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2394 .read_memory = cortex_m_read_memory,
2395 .write_memory = cortex_m_write_memory,
2396 .checksum_memory = armv7m_checksum_memory,
2397 .blank_check_memory = armv7m_blank_check_memory,
2399 .run_algorithm = armv7m_run_algorithm,
2400 .start_algorithm = armv7m_start_algorithm,
2401 .wait_algorithm = armv7m_wait_algorithm,
2403 .add_breakpoint = cortex_m_add_breakpoint,
2404 .remove_breakpoint = cortex_m_remove_breakpoint,
2405 .add_watchpoint = cortex_m_add_watchpoint,
2406 .remove_watchpoint = cortex_m_remove_watchpoint,
2408 .commands = cortex_m_command_handlers,
2409 .target_create = cortex_m_target_create,
2410 .init_target = cortex_m_init_target,
2411 .examine = cortex_m_examine,
2412 .deinit_target = cortex_m_deinit_target,