1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
29 ***************************************************************************/
34 #include "breakpoints.h"
35 #include "cortex_m3.h"
36 #include "target_request.h"
37 #include "target_type.h"
38 #include "arm_disassembler.h"
40 #include "arm_opcodes.h"
41 #include "arm_semihosting.h"
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FBP remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
55 /* forward declarations */
56 static int cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint);
57 static int cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint);
58 static void cortex_m3_enable_watchpoints(struct target *target);
59 static int cortex_m3_store_core_reg_u32(struct target *target,
60 enum armv7m_regtype type, uint32_t num, uint32_t value);
62 static int cortexm3_dap_read_coreregister_u32(struct adiv5_dap *swjdp,
63 uint32_t *value, int regnum)
68 /* because the DCB_DCRDR is used for the emulated dcc channel
69 * we have to save/restore the DCB_DCRDR when used */
71 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
72 if (retval != ERROR_OK)
75 /* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
76 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
77 if (retval != ERROR_OK)
79 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum);
80 if (retval != ERROR_OK)
83 /* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
84 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
85 if (retval != ERROR_OK)
87 retval = dap_queue_ap_read(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
88 if (retval != ERROR_OK)
91 retval = dap_run(swjdp);
92 if (retval != ERROR_OK)
95 /* restore DCB_DCRDR - this needs to be in a seperate
96 * transaction otherwise the emulated DCC channel breaks */
97 if (retval == ERROR_OK)
98 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
103 static int cortexm3_dap_write_coreregister_u32(struct adiv5_dap *swjdp,
104 uint32_t value, int regnum)
109 /* because the DCB_DCRDR is used for the emulated dcc channel
110 * we have to save/restore the DCB_DCRDR when used */
112 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
113 if (retval != ERROR_OK)
116 /* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
117 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
118 if (retval != ERROR_OK)
120 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
123 /* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
124 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
125 if (retval != ERROR_OK)
127 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum | DCRSR_WnR);
130 retval = dap_run(swjdp);
132 /* restore DCB_DCRDR - this needs to be in a seperate
133 * transaction otherwise the emulated DCC channel breaks */
134 if (retval == ERROR_OK)
135 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
140 static int cortex_m3_write_debug_halt_mask(struct target *target,
141 uint32_t mask_on, uint32_t mask_off)
143 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
144 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
146 /* mask off status bits */
147 cortex_m3->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
148 /* create new register mask */
149 cortex_m3->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
151 return mem_ap_write_atomic_u32(swjdp, DCB_DHCSR, cortex_m3->dcb_dhcsr);
154 static int cortex_m3_clear_halt(struct target *target)
156 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
157 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
160 /* clear step if any */
161 cortex_m3_write_debug_halt_mask(target, C_HALT, C_STEP);
163 /* Read Debug Fault Status Register */
164 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR, &cortex_m3->nvic_dfsr);
165 if (retval != ERROR_OK)
168 /* Clear Debug Fault Status */
169 retval = mem_ap_write_atomic_u32(swjdp, NVIC_DFSR, cortex_m3->nvic_dfsr);
170 if (retval != ERROR_OK)
172 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m3->nvic_dfsr);
177 static int cortex_m3_single_step_core(struct target *target)
179 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
180 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
184 /* backup dhcsr reg */
185 dhcsr_save = cortex_m3->dcb_dhcsr;
187 /* Mask interrupts before clearing halt, if done already. This avoids
188 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
189 * HALT can put the core into an unknown state.
191 if (!(cortex_m3->dcb_dhcsr & C_MASKINTS))
193 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
194 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
195 if (retval != ERROR_OK)
198 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
199 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
200 if (retval != ERROR_OK)
204 /* restore dhcsr reg */
205 cortex_m3->dcb_dhcsr = dhcsr_save;
206 cortex_m3_clear_halt(target);
211 static int cortex_m3_endreset_event(struct target *target)
216 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
217 struct armv7m_common *armv7m = &cortex_m3->armv7m;
218 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
219 struct cortex_m3_fp_comparator *fp_list = cortex_m3->fp_comparator_list;
220 struct cortex_m3_dwt_comparator *dwt_list = cortex_m3->dwt_comparator_list;
222 /* REVISIT The four debug monitor bits are currently ignored... */
223 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &dcb_demcr);
224 if (retval != ERROR_OK)
226 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "",dcb_demcr);
228 /* this register is used for emulated dcc channel */
229 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
230 if (retval != ERROR_OK)
233 /* Enable debug requests */
234 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
235 if (retval != ERROR_OK)
237 if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
239 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
240 if (retval != ERROR_OK)
244 /* clear any interrupt masking */
245 cortex_m3_write_debug_halt_mask(target, 0, C_MASKINTS);
247 /* Enable features controlled by ITM and DWT blocks, and catch only
248 * the vectors we were told to pay attention to.
250 * Target firmware is responsible for all fault handling policy
251 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
252 * or manual updates to the NVIC SHCSR and CCR registers.
254 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, TRCENA | armv7m->demcr);
255 if (retval != ERROR_OK)
258 /* Paranoia: evidently some (early?) chips don't preserve all the
259 * debug state (including FBP, DWT, etc) across reset...
263 retval = target_write_u32(target, FP_CTRL, 3);
264 if (retval != ERROR_OK)
267 cortex_m3->fpb_enabled = 1;
269 /* Restore FPB registers */
270 for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
272 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
273 if (retval != ERROR_OK)
277 /* Restore DWT registers */
278 for (i = 0; i < cortex_m3->dwt_num_comp; i++)
280 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
282 if (retval != ERROR_OK)
284 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
286 if (retval != ERROR_OK)
288 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
289 dwt_list[i].function);
290 if (retval != ERROR_OK)
293 retval = dap_run(swjdp);
294 if (retval != ERROR_OK)
297 register_cache_invalidate(cortex_m3->armv7m.core_cache);
299 /* make sure we have latest dhcsr flags */
300 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
305 static int cortex_m3_examine_debug_reason(struct target *target)
307 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
309 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason */
310 /* only check the debug reason if we don't know it already */
312 if ((target->debug_reason != DBG_REASON_DBGRQ)
313 && (target->debug_reason != DBG_REASON_SINGLESTEP))
315 if (cortex_m3->nvic_dfsr & DFSR_BKPT)
317 target->debug_reason = DBG_REASON_BREAKPOINT;
318 if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
319 target->debug_reason = DBG_REASON_WPTANDBKPT;
321 else if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
322 target->debug_reason = DBG_REASON_WATCHPOINT;
323 else if (cortex_m3->nvic_dfsr & DFSR_VCATCH)
324 target->debug_reason = DBG_REASON_BREAKPOINT;
325 else /* EXTERNAL, HALTED */
326 target->debug_reason = DBG_REASON_UNDEFINED;
332 static int cortex_m3_examine_exception_reason(struct target *target)
334 uint32_t shcsr, except_sr, cfsr = -1, except_ar = -1;
335 struct armv7m_common *armv7m = target_to_armv7m(target);
336 struct adiv5_dap *swjdp = &armv7m->dap;
339 retval = mem_ap_read_u32(swjdp, NVIC_SHCSR, &shcsr);
340 if (retval != ERROR_OK)
342 switch (armv7m->exception_number)
346 case 3: /* Hard Fault */
347 retval = mem_ap_read_atomic_u32(swjdp, NVIC_HFSR, &except_sr);
348 if (retval != ERROR_OK)
350 if (except_sr & 0x40000000)
352 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &cfsr);
353 if (retval != ERROR_OK)
357 case 4: /* Memory Management */
358 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
359 if (retval != ERROR_OK)
361 retval = mem_ap_read_u32(swjdp, NVIC_MMFAR, &except_ar);
362 if (retval != ERROR_OK)
365 case 5: /* Bus Fault */
366 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
367 if (retval != ERROR_OK)
369 retval = mem_ap_read_u32(swjdp, NVIC_BFAR, &except_ar);
370 if (retval != ERROR_OK)
373 case 6: /* Usage Fault */
374 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
375 if (retval != ERROR_OK)
378 case 11: /* SVCall */
380 case 12: /* Debug Monitor */
381 retval = mem_ap_read_u32(swjdp, NVIC_DFSR, &except_sr);
382 if (retval != ERROR_OK)
385 case 14: /* PendSV */
387 case 15: /* SysTick */
393 retval = dap_run(swjdp);
394 if (retval == ERROR_OK)
395 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
396 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
397 armv7m_exception_string(armv7m->exception_number),
398 shcsr, except_sr, cfsr, except_ar);
402 /* PSP is used in some thread modes */
403 static const int armv7m_psp_reg_map[17] = {
404 ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
405 ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
406 ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
407 ARMV7M_R12, ARMV7M_PSP, ARMV7M_R14, ARMV7M_PC,
411 /* MSP is used in handler and some thread modes */
412 static const int armv7m_msp_reg_map[17] = {
413 ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
414 ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
415 ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
416 ARMV7M_R12, ARMV7M_MSP, ARMV7M_R14, ARMV7M_PC,
420 static int cortex_m3_debug_entry(struct target *target)
425 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
426 struct armv7m_common *armv7m = &cortex_m3->armv7m;
427 struct arm *arm = &armv7m->arm;
428 struct adiv5_dap *swjdp = &armv7m->dap;
433 cortex_m3_clear_halt(target);
434 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
435 if (retval != ERROR_OK)
438 if ((retval = armv7m->examine_debug_reason(target)) != ERROR_OK)
441 /* Examine target state and mode */
442 /* First load register acessible through core debug port*/
443 int num_regs = armv7m->core_cache->num_regs;
445 for (i = 0; i < num_regs; i++)
447 if (!armv7m->core_cache->reg_list[i].valid)
448 armv7m->read_core_reg(target, i);
451 r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
452 xPSR = buf_get_u32(r->value, 0, 32);
454 #ifdef ARMV7_GDB_HACKS
455 /* FIXME this breaks on scan chains with more than one Cortex-M3.
456 * Instead, each CM3 should have its own dummy value...
458 /* copy real xpsr reg for gdb, setting thumb bit */
459 buf_set_u32(armv7m_gdb_dummy_cpsr_value, 0, 32, xPSR);
460 buf_set_u32(armv7m_gdb_dummy_cpsr_value, 5, 1, 1);
461 armv7m_gdb_dummy_cpsr_reg.valid = r->valid;
462 armv7m_gdb_dummy_cpsr_reg.dirty = r->dirty;
465 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
469 cortex_m3_store_core_reg_u32(target, ARMV7M_REGISTER_CORE_GP, 16, xPSR &~ 0xff);
472 /* Are we in an exception handler */
475 armv7m->core_mode = ARMV7M_MODE_HANDLER;
476 armv7m->exception_number = (xPSR & 0x1FF);
478 arm->core_mode = ARM_MODE_HANDLER;
479 arm->map = armv7m_msp_reg_map;
483 unsigned control = buf_get_u32(armv7m->core_cache
484 ->reg_list[ARMV7M_CONTROL].value, 0, 2);
486 /* is this thread privileged? */
487 armv7m->core_mode = control & 1;
488 arm->core_mode = armv7m->core_mode
489 ? ARM_MODE_USER_THREAD
492 /* which stack is it using? */
494 arm->map = armv7m_psp_reg_map;
496 arm->map = armv7m_msp_reg_map;
498 armv7m->exception_number = 0;
501 if (armv7m->exception_number)
503 cortex_m3_examine_exception_reason(target);
506 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
507 armv7m_mode_strings[armv7m->core_mode],
508 *(uint32_t*)(arm->pc->value),
509 target_state_name(target));
511 if (armv7m->post_debug_entry)
513 retval = armv7m->post_debug_entry(target);
514 if (retval != ERROR_OK)
521 static int cortex_m3_poll(struct target *target)
524 enum target_state prev_target_state = target->state;
525 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
526 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
528 /* Read from Debug Halting Control and Status Register */
529 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
530 if (retval != ERROR_OK)
532 target->state = TARGET_UNKNOWN;
536 /* Recover from lockup. See ARMv7-M architecture spec,
537 * section B1.5.15 "Unrecoverable exception cases".
539 * REVISIT Is there a better way to report and handle this?
541 if (cortex_m3->dcb_dhcsr & S_LOCKUP) {
542 LOG_WARNING("%s -- clearing lockup after double fault",
543 target_name(target));
544 cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
545 target->debug_reason = DBG_REASON_DBGRQ;
547 /* refresh status bits */
548 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
549 if (retval != ERROR_OK)
553 if (cortex_m3->dcb_dhcsr & S_RESET_ST)
555 /* check if still in reset */
556 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
557 if (retval != ERROR_OK)
560 if (cortex_m3->dcb_dhcsr & S_RESET_ST)
562 target->state = TARGET_RESET;
567 if (target->state == TARGET_RESET)
569 /* Cannot switch context while running so endreset is
570 * called with target->state == TARGET_RESET
572 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
573 cortex_m3->dcb_dhcsr);
574 cortex_m3_endreset_event(target);
575 target->state = TARGET_RUNNING;
576 prev_target_state = TARGET_RUNNING;
579 if (cortex_m3->dcb_dhcsr & S_HALT)
581 target->state = TARGET_HALTED;
583 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET))
585 if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
588 if (arm_semihosting(target, &retval) != 0)
591 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
593 if (prev_target_state == TARGET_DEBUG_RUNNING)
596 if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
599 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
603 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
604 * How best to model low power modes?
607 if (target->state == TARGET_UNKNOWN)
609 /* check if processor is retiring instructions */
610 if (cortex_m3->dcb_dhcsr & S_RETIRE_ST)
612 target->state = TARGET_RUNNING;
620 static int cortex_m3_halt(struct target *target)
622 LOG_DEBUG("target->state: %s",
623 target_state_name(target));
625 if (target->state == TARGET_HALTED)
627 LOG_DEBUG("target was already halted");
631 if (target->state == TARGET_UNKNOWN)
633 LOG_WARNING("target was in unknown state when halt was requested");
636 if (target->state == TARGET_RESET)
638 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst())
640 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
641 return ERROR_TARGET_FAILURE;
645 /* we came here in a reset_halt or reset_init sequence
646 * debug entry was already prepared in cortex_m3_prepare_reset_halt()
648 target->debug_reason = DBG_REASON_DBGRQ;
654 /* Write to Debug Halting Control and Status Register */
655 cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
657 target->debug_reason = DBG_REASON_DBGRQ;
662 static int cortex_m3_soft_reset_halt(struct target *target)
664 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
665 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
666 uint32_t dcb_dhcsr = 0;
667 int retval, timeout = 0;
669 /* Enter debug state on reset; restore DEMCR in endreset_event() */
670 retval = mem_ap_write_u32(swjdp, DCB_DEMCR,
671 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
672 if (retval != ERROR_OK)
675 /* Request a core-only reset */
676 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
677 AIRCR_VECTKEY | AIRCR_VECTRESET);
678 if (retval != ERROR_OK)
680 target->state = TARGET_RESET;
682 /* registers are now invalid */
683 register_cache_invalidate(cortex_m3->armv7m.core_cache);
685 while (timeout < 100)
687 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &dcb_dhcsr);
688 if (retval == ERROR_OK)
690 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR,
691 &cortex_m3->nvic_dfsr);
692 if (retval != ERROR_OK)
694 if ((dcb_dhcsr & S_HALT)
695 && (cortex_m3->nvic_dfsr & DFSR_VCATCH))
697 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
699 (unsigned) dcb_dhcsr,
700 (unsigned) cortex_m3->nvic_dfsr);
701 cortex_m3_poll(target);
702 /* FIXME restore user's vector catch config */
706 LOG_DEBUG("waiting for system reset-halt, "
707 "DHCSR 0x%08x, %d ms",
708 (unsigned) dcb_dhcsr, timeout);
717 static void cortex_m3_enable_breakpoints(struct target *target)
719 struct breakpoint *breakpoint = target->breakpoints;
721 /* set any pending breakpoints */
724 if (!breakpoint->set)
725 cortex_m3_set_breakpoint(target, breakpoint);
726 breakpoint = breakpoint->next;
730 static int cortex_m3_resume(struct target *target, int current,
731 uint32_t address, int handle_breakpoints, int debug_execution)
733 struct armv7m_common *armv7m = target_to_armv7m(target);
734 struct breakpoint *breakpoint = NULL;
738 if (target->state != TARGET_HALTED)
740 LOG_WARNING("target not halted");
741 return ERROR_TARGET_NOT_HALTED;
744 if (!debug_execution)
746 target_free_all_working_areas(target);
747 cortex_m3_enable_breakpoints(target);
748 cortex_m3_enable_watchpoints(target);
753 r = armv7m->core_cache->reg_list + ARMV7M_PRIMASK;
755 /* Disable interrupts */
756 /* We disable interrupts in the PRIMASK register instead of
757 * masking with C_MASKINTS. This is probably the same issue
758 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
759 * in parallel with disabled interrupts can cause local faults
762 * REVISIT this clearly breaks non-debug execution, since the
763 * PRIMASK register state isn't saved/restored... workaround
764 * by never resuming app code after debug execution.
766 buf_set_u32(r->value, 0, 1, 1);
770 /* Make sure we are in Thumb mode */
771 r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
772 buf_set_u32(r->value, 24, 1, 1);
777 /* current = 1: continue on current pc, otherwise continue at <address> */
781 buf_set_u32(r->value, 0, 32, address);
786 /* if we halted last time due to a bkpt instruction
787 * then we have to manually step over it, otherwise
788 * the core will break again */
790 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
793 armv7m_maybe_skip_bkpt_inst(target, NULL);
796 resume_pc = buf_get_u32(r->value, 0, 32);
798 armv7m_restore_context(target);
800 /* the front-end may request us not to handle breakpoints */
801 if (handle_breakpoints)
803 /* Single step past breakpoint at current address */
804 if ((breakpoint = breakpoint_find(target, resume_pc)))
806 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %d)",
808 breakpoint->unique_id);
809 cortex_m3_unset_breakpoint(target, breakpoint);
810 cortex_m3_single_step_core(target);
811 cortex_m3_set_breakpoint(target, breakpoint);
816 cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
818 target->debug_reason = DBG_REASON_NOTHALTED;
820 /* registers are now invalid */
821 register_cache_invalidate(armv7m->core_cache);
823 if (!debug_execution)
825 target->state = TARGET_RUNNING;
826 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
827 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
831 target->state = TARGET_DEBUG_RUNNING;
832 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
833 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
839 /* int irqstepcount = 0; */
840 static int cortex_m3_step(struct target *target, int current,
841 uint32_t address, int handle_breakpoints)
843 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
844 struct armv7m_common *armv7m = &cortex_m3->armv7m;
845 struct adiv5_dap *swjdp = &armv7m->dap;
846 struct breakpoint *breakpoint = NULL;
847 struct reg *pc = armv7m->arm.pc;
848 bool bkpt_inst_found = false;
850 if (target->state != TARGET_HALTED)
852 LOG_WARNING("target not halted");
853 return ERROR_TARGET_NOT_HALTED;
856 /* current = 1: continue on current pc, otherwise continue at <address> */
858 buf_set_u32(pc->value, 0, 32, address);
860 /* the front-end may request us not to handle breakpoints */
861 if (handle_breakpoints) {
862 breakpoint = breakpoint_find(target,
863 buf_get_u32(pc->value, 0, 32));
865 cortex_m3_unset_breakpoint(target, breakpoint);
868 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
870 target->debug_reason = DBG_REASON_SINGLESTEP;
872 armv7m_restore_context(target);
874 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
876 /* if no bkpt instruction is found at pc then we can perform
877 * a normal step, otherwise we have to manually step over the bkpt
878 * instruction - as such simulate a step */
879 if (bkpt_inst_found == false)
881 /* set step and clear halt */
882 cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
886 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
887 if (retval != ERROR_OK)
890 /* registers are now invalid */
891 register_cache_invalidate(cortex_m3->armv7m.core_cache);
894 cortex_m3_set_breakpoint(target, breakpoint);
896 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
897 " nvic_icsr = 0x%" PRIx32,
898 cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
900 retval = cortex_m3_debug_entry(target);
901 if (retval != ERROR_OK)
903 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
905 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
906 " nvic_icsr = 0x%" PRIx32,
907 cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
912 static int cortex_m3_assert_reset(struct target *target)
914 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
915 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
916 enum cortex_m3_soft_reset_config reset_config = cortex_m3->soft_reset_config;
918 LOG_DEBUG("target->state: %s",
919 target_state_name(target));
921 enum reset_types jtag_reset_config = jtag_get_reset_config();
924 * We can reset Cortex-M3 targets using just the NVIC without
925 * requiring SRST, getting a SoC reset (or a core-only reset)
926 * instead of a system reset.
928 if (!(jtag_reset_config & RESET_HAS_SRST) &&
929 (cortex_m3->soft_reset_config == CORTEX_M3_RESET_SRST)) {
930 reset_config = CORTEX_M3_RESET_VECTRESET;
933 /* Enable debug requests */
935 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
936 if (retval != ERROR_OK)
938 if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
940 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
941 if (retval != ERROR_OK)
945 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
946 if (retval != ERROR_OK)
949 if (!target->reset_halt)
951 /* Set/Clear C_MASKINTS in a separate operation */
952 if (cortex_m3->dcb_dhcsr & C_MASKINTS)
954 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
955 DBGKEY | C_DEBUGEN | C_HALT);
956 if (retval != ERROR_OK)
960 /* clear any debug flags before resuming */
961 cortex_m3_clear_halt(target);
963 /* clear C_HALT in dhcsr reg */
964 cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
968 /* Halt in debug on reset; endreset_event() restores DEMCR.
970 * REVISIT catching BUSERR presumably helps to defend against
971 * bad vector table entries. Should this include MMERR or
974 retval = mem_ap_write_atomic_u32(swjdp, DCB_DEMCR,
975 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
976 if (retval != ERROR_OK)
980 if (reset_config == CORTEX_M3_RESET_SRST)
982 /* default to asserting srst */
983 if (jtag_reset_config & RESET_SRST_PULLS_TRST)
985 jtag_add_reset(1, 1);
989 jtag_add_reset(0, 1);
994 /* Use a standard Cortex-M3 software reset mechanism.
995 * We default to using VECRESET as it is supported on all current cores.
996 * This has the disadvantage of not resetting the peripherals, so a
997 * reset-init event handler is needed to perform any peripheral resets.
999 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
1000 AIRCR_VECTKEY | ((reset_config == CORTEX_M3_RESET_SYSRESETREQ)
1001 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1002 if (retval != ERROR_OK)
1005 LOG_DEBUG("Using Cortex-M3 %s", (reset_config == CORTEX_M3_RESET_SYSRESETREQ)
1006 ? "SYSRESETREQ" : "VECTRESET");
1008 if (reset_config == CORTEX_M3_RESET_VECTRESET) {
1009 LOG_WARNING("Only resetting the Cortex-M3 core, use a reset-init event "
1010 "handler to reset any peripherals");
1014 /* I do not know why this is necessary, but it
1015 * fixes strange effects (step/resume cause NMI
1016 * after reset) on LM3S6918 -- Michael Schwingen
1019 retval = mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp);
1020 if (retval != ERROR_OK)
1025 target->state = TARGET_RESET;
1026 jtag_add_sleep(50000);
1028 register_cache_invalidate(cortex_m3->armv7m.core_cache);
1030 if (target->reset_halt)
1032 if ((retval = target_halt(target)) != ERROR_OK)
1039 static int cortex_m3_deassert_reset(struct target *target)
1041 LOG_DEBUG("target->state: %s",
1042 target_state_name(target));
1044 /* deassert reset lines */
1045 jtag_add_reset(0, 0);
1051 cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1056 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1057 struct cortex_m3_fp_comparator *comparator_list = cortex_m3->fp_comparator_list;
1059 if (breakpoint->set)
1061 LOG_WARNING("breakpoint (BPID: %d) already set", breakpoint->unique_id);
1065 if (cortex_m3->auto_bp_type)
1067 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1070 if (breakpoint->type == BKPT_HARD)
1072 while (comparator_list[fp_num].used && (fp_num < cortex_m3->fp_num_code))
1074 if (fp_num >= cortex_m3->fp_num_code)
1076 LOG_ERROR("Can not find free FPB Comparator!");
1079 breakpoint->set = fp_num + 1;
1080 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1081 comparator_list[fp_num].used = 1;
1082 comparator_list[fp_num].fpcr_value = (breakpoint->address & 0x1FFFFFFC) | hilo | 1;
1083 target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
1084 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "", fp_num, comparator_list[fp_num].fpcr_value);
1085 if (!cortex_m3->fpb_enabled)
1087 LOG_DEBUG("FPB wasn't enabled, do it now");
1088 target_write_u32(target, FP_CTRL, 3);
1091 else if (breakpoint->type == BKPT_SOFT)
1095 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1096 * semihosting; don't use that. Otherwise the BKPT
1097 * parameter is arbitrary.
1099 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1100 retval = target_read_memory(target,
1101 breakpoint->address & 0xFFFFFFFE,
1102 breakpoint->length, 1,
1103 breakpoint->orig_instr);
1104 if (retval != ERROR_OK)
1106 retval = target_write_memory(target,
1107 breakpoint->address & 0xFFFFFFFE,
1108 breakpoint->length, 1,
1110 if (retval != ERROR_OK)
1112 breakpoint->set = true;
1115 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1116 breakpoint->unique_id,
1117 (int)(breakpoint->type),
1118 breakpoint->address,
1126 cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1129 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1130 struct cortex_m3_fp_comparator * comparator_list = cortex_m3->fp_comparator_list;
1132 if (!breakpoint->set)
1134 LOG_WARNING("breakpoint not set");
1138 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1139 breakpoint->unique_id,
1140 (int)(breakpoint->type),
1141 breakpoint->address,
1145 if (breakpoint->type == BKPT_HARD)
1147 int fp_num = breakpoint->set - 1;
1148 if ((fp_num < 0) || (fp_num >= cortex_m3->fp_num_code))
1150 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1153 comparator_list[fp_num].used = 0;
1154 comparator_list[fp_num].fpcr_value = 0;
1155 target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
1159 /* restore original instruction (kept in target endianness) */
1160 if (breakpoint->length == 4)
1162 if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
1169 if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
1175 breakpoint->set = false;
1181 cortex_m3_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1183 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1185 if (cortex_m3->auto_bp_type)
1187 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1188 #ifdef ARMV7_GDB_HACKS
1189 if (breakpoint->length != 2) {
1190 /* XXX Hack: Replace all breakpoints with length != 2 with
1191 * a hardware breakpoint. */
1192 breakpoint->type = BKPT_HARD;
1193 breakpoint->length = 2;
1198 if ((breakpoint->type == BKPT_HARD) && (breakpoint->address >= 0x20000000))
1200 LOG_INFO("flash patch comparator requested outside code memory region");
1201 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1204 if ((breakpoint->type == BKPT_SOFT) && (breakpoint->address < 0x20000000))
1206 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1207 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1210 if ((breakpoint->type == BKPT_HARD) && (cortex_m3->fp_code_available < 1))
1212 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1213 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1216 if ((breakpoint->length != 2))
1218 LOG_INFO("only breakpoints of two bytes length supported");
1219 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1222 if (breakpoint->type == BKPT_HARD)
1223 cortex_m3->fp_code_available--;
1224 cortex_m3_set_breakpoint(target, breakpoint);
1230 cortex_m3_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1232 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1234 /* REVISIT why check? FBP can be updated with core running ... */
1235 if (target->state != TARGET_HALTED)
1237 LOG_WARNING("target not halted");
1238 return ERROR_TARGET_NOT_HALTED;
1241 if (cortex_m3->auto_bp_type)
1243 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1246 if (breakpoint->set)
1248 cortex_m3_unset_breakpoint(target, breakpoint);
1251 if (breakpoint->type == BKPT_HARD)
1252 cortex_m3->fp_code_available++;
1258 cortex_m3_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1261 uint32_t mask, temp;
1262 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1264 /* watchpoint params were validated earlier */
1266 temp = watchpoint->length;
1273 /* REVISIT Don't fully trust these "not used" records ... users
1274 * may set up breakpoints by hand, e.g. dual-address data value
1275 * watchpoint using comparator #1; comparator #0 matching cycle
1276 * count; send data trace info through ITM and TPIU; etc
1278 struct cortex_m3_dwt_comparator *comparator;
1280 for (comparator = cortex_m3->dwt_comparator_list;
1281 comparator->used && dwt_num < cortex_m3->dwt_num_comp;
1282 comparator++, dwt_num++)
1284 if (dwt_num >= cortex_m3->dwt_num_comp)
1286 LOG_ERROR("Can not find free DWT Comparator");
1289 comparator->used = 1;
1290 watchpoint->set = dwt_num + 1;
1292 comparator->comp = watchpoint->address;
1293 target_write_u32(target, comparator->dwt_comparator_address + 0,
1296 comparator->mask = mask;
1297 target_write_u32(target, comparator->dwt_comparator_address + 4,
1300 switch (watchpoint->rw) {
1302 comparator->function = 5;
1305 comparator->function = 6;
1308 comparator->function = 7;
1311 target_write_u32(target, comparator->dwt_comparator_address + 8,
1312 comparator->function);
1314 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1315 watchpoint->unique_id, dwt_num,
1316 (unsigned) comparator->comp,
1317 (unsigned) comparator->mask,
1318 (unsigned) comparator->function);
1323 cortex_m3_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1325 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1326 struct cortex_m3_dwt_comparator *comparator;
1329 if (!watchpoint->set)
1331 LOG_WARNING("watchpoint (wpid: %d) not set",
1332 watchpoint->unique_id);
1336 dwt_num = watchpoint->set - 1;
1338 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1339 watchpoint->unique_id, dwt_num,
1340 (unsigned) watchpoint->address);
1342 if ((dwt_num < 0) || (dwt_num >= cortex_m3->dwt_num_comp))
1344 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1348 comparator = cortex_m3->dwt_comparator_list + dwt_num;
1349 comparator->used = 0;
1350 comparator->function = 0;
1351 target_write_u32(target, comparator->dwt_comparator_address + 8,
1352 comparator->function);
1354 watchpoint->set = false;
1360 cortex_m3_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1362 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1364 if (cortex_m3->dwt_comp_available < 1)
1366 LOG_DEBUG("no comparators?");
1367 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1370 /* hardware doesn't support data value masking */
1371 if (watchpoint->mask != ~(uint32_t)0) {
1372 LOG_DEBUG("watchpoint value masks not supported");
1373 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1376 /* hardware allows address masks of up to 32K */
1379 for (mask = 0; mask < 16; mask++) {
1380 if ((1u << mask) == watchpoint->length)
1384 LOG_DEBUG("unsupported watchpoint length");
1385 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1387 if (watchpoint->address & ((1 << mask) - 1)) {
1388 LOG_DEBUG("watchpoint address is unaligned");
1389 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1392 /* Caller doesn't seem to be able to describe watching for data
1393 * values of zero; that flags "no value".
1395 * REVISIT This DWT may well be able to watch for specific data
1396 * values. Requires comparator #1 to set DATAVMATCH and match
1397 * the data, and another comparator (DATAVADDR0) matching addr.
1399 if (watchpoint->value) {
1400 LOG_DEBUG("data value watchpoint not YET supported");
1401 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1404 cortex_m3->dwt_comp_available--;
1405 LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
1411 cortex_m3_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1413 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1415 /* REVISIT why check? DWT can be updated with core running ... */
1416 if (target->state != TARGET_HALTED)
1418 LOG_WARNING("target not halted");
1419 return ERROR_TARGET_NOT_HALTED;
1422 if (watchpoint->set)
1424 cortex_m3_unset_watchpoint(target, watchpoint);
1427 cortex_m3->dwt_comp_available++;
1428 LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
1433 static void cortex_m3_enable_watchpoints(struct target *target)
1435 struct watchpoint *watchpoint = target->watchpoints;
1437 /* set any pending watchpoints */
1440 if (!watchpoint->set)
1441 cortex_m3_set_watchpoint(target, watchpoint);
1442 watchpoint = watchpoint->next;
1446 static int cortex_m3_load_core_reg_u32(struct target *target,
1447 enum armv7m_regtype type, uint32_t num, uint32_t * value)
1450 struct armv7m_common *armv7m = target_to_armv7m(target);
1451 struct adiv5_dap *swjdp = &armv7m->dap;
1453 /* NOTE: we "know" here that the register identifiers used
1454 * in the v7m header match the Cortex-M3 Debug Core Register
1455 * Selector values for R0..R15, xPSR, MSP, and PSP.
1459 /* read a normal core register */
1460 retval = cortexm3_dap_read_coreregister_u32(swjdp, value, num);
1462 if (retval != ERROR_OK)
1464 LOG_ERROR("JTAG failure %i",retval);
1465 return ERROR_JTAG_DEVICE_ERROR;
1467 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "",(int)num,*value);
1470 case ARMV7M_PRIMASK:
1471 case ARMV7M_BASEPRI:
1472 case ARMV7M_FAULTMASK:
1473 case ARMV7M_CONTROL:
1474 /* Cortex-M3 packages these four registers as bitfields
1475 * in one Debug Core register. So say r0 and r2 docs;
1476 * it was removed from r1 docs, but still works.
1478 cortexm3_dap_read_coreregister_u32(swjdp, value, 20);
1482 case ARMV7M_PRIMASK:
1483 *value = buf_get_u32((uint8_t*)value, 0, 1);
1486 case ARMV7M_BASEPRI:
1487 *value = buf_get_u32((uint8_t*)value, 8, 8);
1490 case ARMV7M_FAULTMASK:
1491 *value = buf_get_u32((uint8_t*)value, 16, 1);
1494 case ARMV7M_CONTROL:
1495 *value = buf_get_u32((uint8_t*)value, 24, 2);
1499 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1503 return ERROR_INVALID_ARGUMENTS;
1509 static int cortex_m3_store_core_reg_u32(struct target *target,
1510 enum armv7m_regtype type, uint32_t num, uint32_t value)
1514 struct armv7m_common *armv7m = target_to_armv7m(target);
1515 struct adiv5_dap *swjdp = &armv7m->dap;
1517 #ifdef ARMV7_GDB_HACKS
1518 /* If the LR register is being modified, make sure it will put us
1519 * in "thumb" mode, or an INVSTATE exception will occur. This is a
1520 * hack to deal with the fact that gdb will sometimes "forge"
1521 * return addresses, and doesn't set the LSB correctly (i.e., when
1522 * printing expressions containing function calls, it sets LR = 0.)
1523 * Valid exception return codes have bit 0 set too.
1525 if (num == ARMV7M_R14)
1529 /* NOTE: we "know" here that the register identifiers used
1530 * in the v7m header match the Cortex-M3 Debug Core Register
1531 * Selector values for R0..R15, xPSR, MSP, and PSP.
1535 retval = cortexm3_dap_write_coreregister_u32(swjdp, value, num);
1536 if (retval != ERROR_OK)
1540 LOG_ERROR("JTAG failure %i", retval);
1541 r = armv7m->core_cache->reg_list + num;
1542 r->dirty = r->valid;
1543 return ERROR_JTAG_DEVICE_ERROR;
1545 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1548 case ARMV7M_PRIMASK:
1549 case ARMV7M_BASEPRI:
1550 case ARMV7M_FAULTMASK:
1551 case ARMV7M_CONTROL:
1552 /* Cortex-M3 packages these four registers as bitfields
1553 * in one Debug Core register. So say r0 and r2 docs;
1554 * it was removed from r1 docs, but still works.
1556 cortexm3_dap_read_coreregister_u32(swjdp, ®, 20);
1560 case ARMV7M_PRIMASK:
1561 buf_set_u32((uint8_t*)®, 0, 1, value);
1564 case ARMV7M_BASEPRI:
1565 buf_set_u32((uint8_t*)®, 8, 8, value);
1568 case ARMV7M_FAULTMASK:
1569 buf_set_u32((uint8_t*)®, 16, 1, value);
1572 case ARMV7M_CONTROL:
1573 buf_set_u32((uint8_t*)®, 24, 2, value);
1577 cortexm3_dap_write_coreregister_u32(swjdp, reg, 20);
1579 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1583 return ERROR_INVALID_ARGUMENTS;
1589 static int cortex_m3_read_memory(struct target *target, uint32_t address,
1590 uint32_t size, uint32_t count, uint8_t *buffer)
1592 struct armv7m_common *armv7m = target_to_armv7m(target);
1593 struct adiv5_dap *swjdp = &armv7m->dap;
1594 int retval = ERROR_INVALID_ARGUMENTS;
1596 /* cortex_m3 handles unaligned memory access */
1597 if (count && buffer) {
1600 retval = mem_ap_read_buf_u32(swjdp, buffer, 4 * count, address);
1603 retval = mem_ap_read_buf_u16(swjdp, buffer, 2 * count, address);
1606 retval = mem_ap_read_buf_u8(swjdp, buffer, count, address);
1614 static int cortex_m3_write_memory(struct target *target, uint32_t address,
1615 uint32_t size, uint32_t count, uint8_t *buffer)
1617 struct armv7m_common *armv7m = target_to_armv7m(target);
1618 struct adiv5_dap *swjdp = &armv7m->dap;
1619 int retval = ERROR_INVALID_ARGUMENTS;
1621 if (count && buffer) {
1624 retval = mem_ap_write_buf_u32(swjdp, buffer, 4 * count, address);
1627 retval = mem_ap_write_buf_u16(swjdp, buffer, 2 * count, address);
1630 retval = mem_ap_write_buf_u8(swjdp, buffer, count, address);
1638 static int cortex_m3_bulk_write_memory(struct target *target, uint32_t address,
1639 uint32_t count, uint8_t *buffer)
1641 return cortex_m3_write_memory(target, address, 4, count, buffer);
1644 static int cortex_m3_init_target(struct command_context *cmd_ctx,
1645 struct target *target)
1647 armv7m_build_reg_cache(target);
1651 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1652 * on r/w if the core is not running, and clear on resume or reset ... or
1653 * at least, in a post_restore_context() method.
1656 struct dwt_reg_state {
1657 struct target *target;
1659 uint32_t value; /* scratch/cache */
1662 static int cortex_m3_dwt_get_reg(struct reg *reg)
1664 struct dwt_reg_state *state = reg->arch_info;
1666 return target_read_u32(state->target, state->addr, &state->value);
1669 static int cortex_m3_dwt_set_reg(struct reg *reg, uint8_t *buf)
1671 struct dwt_reg_state *state = reg->arch_info;
1673 return target_write_u32(state->target, state->addr,
1674 buf_get_u32(buf, 0, reg->size));
1683 static struct dwt_reg dwt_base_regs[] = {
1684 { DWT_CTRL, "dwt_ctrl", 32, },
1685 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1686 * increments while the core is asleep.
1688 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1689 /* plus some 8 bit counters, useful for profiling with TPIU */
1692 static struct dwt_reg dwt_comp[] = {
1693 #define DWT_COMPARATOR(i) \
1694 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1695 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1696 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1701 #undef DWT_COMPARATOR
1704 static const struct reg_arch_type dwt_reg_type = {
1705 .get = cortex_m3_dwt_get_reg,
1706 .set = cortex_m3_dwt_set_reg,
1710 cortex_m3_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
1712 struct dwt_reg_state *state;
1714 state = calloc(1, sizeof *state);
1717 state->addr = d->addr;
1722 r->value = &state->value;
1723 r->arch_info = state;
1724 r->type = &dwt_reg_type;
1728 cortex_m3_dwt_setup(struct cortex_m3_common *cm3, struct target *target)
1731 struct reg_cache *cache;
1732 struct cortex_m3_dwt_comparator *comparator;
1735 target_read_u32(target, DWT_CTRL, &dwtcr);
1737 LOG_DEBUG("no DWT");
1741 cm3->dwt_num_comp = (dwtcr >> 28) & 0xF;
1742 cm3->dwt_comp_available = cm3->dwt_num_comp;
1743 cm3->dwt_comparator_list = calloc(cm3->dwt_num_comp,
1744 sizeof(struct cortex_m3_dwt_comparator));
1745 if (!cm3->dwt_comparator_list) {
1747 cm3->dwt_num_comp = 0;
1748 LOG_ERROR("out of mem");
1752 cache = calloc(1, sizeof *cache);
1755 free(cm3->dwt_comparator_list);
1758 cache->name = "cortex-m3 dwt registers";
1759 cache->num_regs = 2 + cm3->dwt_num_comp * 3;
1760 cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
1761 if (!cache->reg_list) {
1766 for (reg = 0; reg < 2; reg++)
1767 cortex_m3_dwt_addreg(target, cache->reg_list + reg,
1768 dwt_base_regs + reg);
1770 comparator = cm3->dwt_comparator_list;
1771 for (i = 0; i < cm3->dwt_num_comp; i++, comparator++) {
1774 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
1775 for (j = 0; j < 3; j++, reg++)
1776 cortex_m3_dwt_addreg(target, cache->reg_list + reg,
1777 dwt_comp + 3 * i + j);
1780 *register_get_last_cache_p(&target->reg_cache) = cache;
1781 cm3->dwt_cache = cache;
1783 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
1784 dwtcr, cm3->dwt_num_comp,
1785 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
1787 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1788 * implement single-address data value watchpoints ... so we
1789 * won't need to check it later, when asked to set one up.
1793 static int cortex_m3_examine(struct target *target)
1796 uint32_t cpuid, fpcr;
1798 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1799 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
1801 if ((retval = ahbap_debugport_init(swjdp)) != ERROR_OK)
1804 if (!target_was_examined(target))
1806 target_set_examined(target);
1808 /* Read from Device Identification Registers */
1809 retval = target_read_u32(target, CPUID, &cpuid);
1810 if (retval != ERROR_OK)
1813 if (((cpuid >> 4) & 0xc3f) == 0xc23)
1814 LOG_DEBUG("Cortex-M3 r%" PRId8 "p%" PRId8 " processor detected",
1815 (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
1816 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
1818 /* NOTE: FPB and DWT are both optional. */
1821 target_read_u32(target, FP_CTRL, &fpcr);
1822 cortex_m3->auto_bp_type = 1;
1823 cortex_m3->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF); /* bits [14:12] and [7:4] */
1824 cortex_m3->fp_num_lit = (fpcr >> 8) & 0xF;
1825 cortex_m3->fp_code_available = cortex_m3->fp_num_code;
1826 cortex_m3->fp_comparator_list = calloc(cortex_m3->fp_num_code + cortex_m3->fp_num_lit, sizeof(struct cortex_m3_fp_comparator));
1827 cortex_m3->fpb_enabled = fpcr & 1;
1828 for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
1830 cortex_m3->fp_comparator_list[i].type = (i < cortex_m3->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
1831 cortex_m3->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
1833 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i", fpcr, cortex_m3->fp_num_code, cortex_m3->fp_num_lit);
1836 cortex_m3_dwt_setup(cortex_m3, target);
1838 /* These hardware breakpoints only work for code in flash! */
1839 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1840 target_name(target),
1841 cortex_m3->fp_num_code,
1842 cortex_m3->dwt_num_comp);
1848 static int cortex_m3_dcc_read(struct adiv5_dap *swjdp, uint8_t *value, uint8_t *ctrl)
1853 mem_ap_read_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
1854 *ctrl = (uint8_t)dcrdr;
1855 *value = (uint8_t)(dcrdr >> 8);
1857 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
1859 /* write ack back to software dcc register
1860 * signify we have read data */
1861 if (dcrdr & (1 << 0))
1864 retval = mem_ap_write_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
1865 if (retval != ERROR_OK)
1872 static int cortex_m3_target_request_data(struct target *target,
1873 uint32_t size, uint8_t *buffer)
1875 struct armv7m_common *armv7m = target_to_armv7m(target);
1876 struct adiv5_dap *swjdp = &armv7m->dap;
1881 for (i = 0; i < (size * 4); i++)
1883 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1890 static int cortex_m3_handle_target_request(void *priv)
1892 struct target *target = priv;
1893 if (!target_was_examined(target))
1895 struct armv7m_common *armv7m = target_to_armv7m(target);
1896 struct adiv5_dap *swjdp = &armv7m->dap;
1898 if (!target->dbg_msg_enabled)
1901 if (target->state == TARGET_RUNNING)
1906 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1908 /* check if we have data */
1909 if (ctrl & (1 << 0))
1913 /* we assume target is quick enough */
1915 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1916 request |= (data << 8);
1917 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1918 request |= (data << 16);
1919 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1920 request |= (data << 24);
1921 target_request(target, request);
1928 static int cortex_m3_init_arch_info(struct target *target,
1929 struct cortex_m3_common *cortex_m3, struct jtag_tap *tap)
1932 struct armv7m_common *armv7m = &cortex_m3->armv7m;
1934 armv7m_init_arch_info(target, armv7m);
1936 /* prepare JTAG information for the new target */
1937 cortex_m3->jtag_info.tap = tap;
1938 cortex_m3->jtag_info.scann_size = 4;
1940 /* default reset mode is to use srst if fitted
1941 * if not it will use CORTEX_M3_RESET_VECTRESET */
1942 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SRST;
1944 armv7m->arm.dap = &armv7m->dap;
1946 /* Leave (only) generic DAP stuff for debugport_init(); */
1947 armv7m->dap.jtag_info = &cortex_m3->jtag_info;
1948 armv7m->dap.memaccess_tck = 8;
1949 /* Cortex-M3 has 4096 bytes autoincrement range */
1950 armv7m->dap.tar_autoincr_block = (1 << 12);
1952 /* register arch-specific functions */
1953 armv7m->examine_debug_reason = cortex_m3_examine_debug_reason;
1955 armv7m->post_debug_entry = NULL;
1957 armv7m->pre_restore_context = NULL;
1959 armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32;
1960 armv7m->store_core_reg_u32 = cortex_m3_store_core_reg_u32;
1962 target_register_timer_callback(cortex_m3_handle_target_request, 1, 1, target);
1964 if ((retval = arm_jtag_setup_connection(&cortex_m3->jtag_info)) != ERROR_OK)
1972 static int cortex_m3_target_create(struct target *target, Jim_Interp *interp)
1974 struct cortex_m3_common *cortex_m3 = calloc(1,sizeof(struct cortex_m3_common));
1976 cortex_m3->common_magic = CORTEX_M3_COMMON_MAGIC;
1977 cortex_m3_init_arch_info(target, cortex_m3, target->tap);
1982 /*--------------------------------------------------------------------------*/
1984 static int cortex_m3_verify_pointer(struct command_context *cmd_ctx,
1985 struct cortex_m3_common *cm3)
1987 if (cm3->common_magic != CORTEX_M3_COMMON_MAGIC) {
1988 command_print(cmd_ctx, "target is not a Cortex-M3");
1989 return ERROR_TARGET_INVALID;
1995 * Only stuff below this line should need to verify that its target
1996 * is a Cortex-M3. Everything else should have indirected through the
1997 * cortexm3_target structure, which is only used with CM3 targets.
2000 static const struct {
2004 { "hard_err", VC_HARDERR, },
2005 { "int_err", VC_INTERR, },
2006 { "bus_err", VC_BUSERR, },
2007 { "state_err", VC_STATERR, },
2008 { "chk_err", VC_CHKERR, },
2009 { "nocp_err", VC_NOCPERR, },
2010 { "mm_err", VC_MMERR, },
2011 { "reset", VC_CORERESET, },
2014 COMMAND_HANDLER(handle_cortex_m3_vector_catch_command)
2016 struct target *target = get_current_target(CMD_CTX);
2017 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2018 struct armv7m_common *armv7m = &cortex_m3->armv7m;
2019 struct adiv5_dap *swjdp = &armv7m->dap;
2023 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2024 if (retval != ERROR_OK)
2027 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2028 if (retval != ERROR_OK)
2034 if (CMD_ARGC == 1) {
2035 if (strcmp(CMD_ARGV[0], "all") == 0) {
2036 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2037 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2038 | VC_MMERR | VC_CORERESET;
2040 } else if (strcmp(CMD_ARGV[0], "none") == 0) {
2044 while (CMD_ARGC-- > 0) {
2046 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2047 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2049 catch |= vec_ids[i].mask;
2052 if (i == ARRAY_SIZE(vec_ids)) {
2053 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2054 return ERROR_INVALID_ARGUMENTS;
2058 /* For now, armv7m->demcr only stores vector catch flags. */
2059 armv7m->demcr = catch;
2064 /* write, but don't assume it stuck (why not??) */
2065 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, demcr);
2066 if (retval != ERROR_OK)
2068 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2069 if (retval != ERROR_OK)
2072 /* FIXME be sure to clear DEMCR on clean server shutdown.
2073 * Otherwise the vector catch hardware could fire when there's
2074 * no debugger hooked up, causing much confusion...
2078 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++)
2080 command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
2081 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2087 COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
2089 struct target *target = get_current_target(CMD_CTX);
2090 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2093 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2094 if (retval != ERROR_OK)
2097 if (target->state != TARGET_HALTED)
2099 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
2106 COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
2107 uint32_t mask_on = C_HALT | (enable ? C_MASKINTS : 0);
2108 uint32_t mask_off = enable ? 0 : C_MASKINTS;
2109 cortex_m3_write_debug_halt_mask(target, mask_on, mask_off);
2112 command_print(CMD_CTX, "cortex_m3 interrupt mask %s",
2113 (cortex_m3->dcb_dhcsr & C_MASKINTS) ? "on" : "off");
2118 COMMAND_HANDLER(handle_cortex_m3_reset_config_command)
2120 struct target *target = get_current_target(CMD_CTX);
2121 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2125 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2126 if (retval != ERROR_OK)
2131 if (strcmp(*CMD_ARGV, "systesetreq") == 0)
2132 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SYSRESETREQ;
2133 else if (strcmp(*CMD_ARGV, "vectreset") == 0)
2134 cortex_m3->soft_reset_config = CORTEX_M3_RESET_VECTRESET;
2136 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SRST;
2139 switch (cortex_m3->soft_reset_config)
2141 case CORTEX_M3_RESET_SRST:
2142 reset_config = "srst";
2145 case CORTEX_M3_RESET_SYSRESETREQ:
2146 reset_config = "sysresetreq";
2149 case CORTEX_M3_RESET_VECTRESET:
2150 reset_config = "vectreset";
2154 reset_config = "unknown";
2158 command_print(CMD_CTX, "cortex_m3 reset_config %s", reset_config);
2163 static const struct command_registration cortex_m3_exec_command_handlers[] = {
2166 .handler = handle_cortex_m3_mask_interrupts_command,
2167 .mode = COMMAND_EXEC,
2168 .help = "mask cortex_m3 interrupts",
2169 .usage = "['on'|'off']",
2172 .name = "vector_catch",
2173 .handler = handle_cortex_m3_vector_catch_command,
2174 .mode = COMMAND_EXEC,
2175 .help = "configure hardware vectors to trigger debug entry",
2176 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2179 .name = "reset_config",
2180 .handler = handle_cortex_m3_reset_config_command,
2181 .mode = COMMAND_ANY,
2182 .help = "configure software reset handling",
2183 .usage = "['srst'|'sysresetreq'|'vectreset']",
2185 COMMAND_REGISTRATION_DONE
2187 static const struct command_registration cortex_m3_command_handlers[] = {
2189 .chain = armv7m_command_handlers,
2192 .name = "cortex_m3",
2193 .mode = COMMAND_EXEC,
2194 .help = "Cortex-M3 command group",
2195 .chain = cortex_m3_exec_command_handlers,
2197 COMMAND_REGISTRATION_DONE
2200 struct target_type cortexm3_target =
2202 .name = "cortex_m3",
2204 .poll = cortex_m3_poll,
2205 .arch_state = armv7m_arch_state,
2207 .target_request_data = cortex_m3_target_request_data,
2209 .halt = cortex_m3_halt,
2210 .resume = cortex_m3_resume,
2211 .step = cortex_m3_step,
2213 .assert_reset = cortex_m3_assert_reset,
2214 .deassert_reset = cortex_m3_deassert_reset,
2215 .soft_reset_halt = cortex_m3_soft_reset_halt,
2217 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2219 .read_memory = cortex_m3_read_memory,
2220 .write_memory = cortex_m3_write_memory,
2221 .bulk_write_memory = cortex_m3_bulk_write_memory,
2222 .checksum_memory = armv7m_checksum_memory,
2223 .blank_check_memory = armv7m_blank_check_memory,
2225 .run_algorithm = armv7m_run_algorithm,
2227 .add_breakpoint = cortex_m3_add_breakpoint,
2228 .remove_breakpoint = cortex_m3_remove_breakpoint,
2229 .add_watchpoint = cortex_m3_add_watchpoint,
2230 .remove_watchpoint = cortex_m3_remove_watchpoint,
2232 .commands = cortex_m3_command_handlers,
2233 .target_create = cortex_m3_target_create,
2234 .init_target = cortex_m3_init_target,
2235 .examine = cortex_m3_examine,