5 # NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
6 # JTAG, power-on reset is not enough, i.e. you need to perform a
7 # reset before being able to talk to the LPC2148, attach is not
10 #use combined on interfaces or targets that can't set TRST/SRST separately
11 reset_config trst_and_srst srst_pulls_trst
14 jtag_device 4 0x1 0xf 0xe
16 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
17 [new_target_name] configure -event reset-init {
18 # Force target into ARM state
20 #do not remap 0x0000-0x0020 to anything but the flash
25 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
27 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
28 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765