1 # Testing feeedback wanted!
4 set _CPUTAPID 0x4f1f0f0f
6 # Use RCLK. If RCLK is not available fall back to 500kHz.
8 # Depending on cabling you might be able to eek this up to 2000kHz.
14 #use combined on interfaces or targets that can't set TRST/SRST separately
15 reset_config trst_and_srst srst_pulls_trst
18 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
20 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
21 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
22 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
25 $_TARGETNAME configure -event reset-init {
26 # Force target into ARM state
28 # FIX!!!! should we remap the range below??? Is this applicable to
29 # Copied from LPC2148.
30 #do not remap 0x0000-0x0020 to anything but the flash
35 flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum