1 #start slow, speed up after reset
5 #use combined on interfaces or targets that can't set TRST/SRST separately
6 reset_config trst_and_srst srst_pulls_trst
9 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
10 jtag_device 4 0x1 0xf 0xe
12 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
13 [new_target_name] configure -event reset-start { jtag_khz 10 }
14 [new_target_name] configure -event reset-init { jtag_khz 6000 }
15 [new_target_name] configure -event gdb-flash-erase-start {
16 flash protect 0 0 7 off
17 flash protect 1 0 1 off
20 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
22 #flash bank str7x <base> <size> 0 0 <target#> <variant>
23 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
24 flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x
26 # For more information about the configuration files, take a look at: