7 #use combined on interfaces or targets that can
\92t set TRST/SRST separately
8 #reset_config trst_and_srst srst_pulls_trst
9 reset_config trst_and_srst srst_pulls_trst
12 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
13 jtag_device 4 0x1 0xf 0xe
15 #jtag nTRST and nSRST delay
19 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
20 [new_target_name] configure -event reset-start { jtag_khz 10 }
21 [new_target_name] configure -event reset-init { jtag_khz 3000 }
22 [new_target_name] configure -event gdb-¿ash-erase-start {
23 flash protect 0 0 7 off
26 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
28 #flash bank <driver> <base> <size> <chip_width> <bus_width>
29 flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x