3 #Atmel ties SRST & TRST together, at which point it makes
\r
4 #no sense to use TRST, but use TMS instead.
\r
6 #The annoying thing with tying SRST & TRST together is that
\r
7 #there is no way to halt the CPU *before and during* the
\r
8 #SRST reset, which means that the CPU will run a number
\r
9 #of cycles before it can be halted(as much as milliseconds).
\r
10 reset_config srst_only srst_pulls_trst
\r
13 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
\r
14 jtag_device 4 0x1 0xf 0xe
\r
16 #target configuration
\r
17 #target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
\r
18 target arm7tdmi little reset_init 0 arm7tdmi-s_r4
\r
20 # at CPU CLK <32kHz this must be disabled
\r
21 arm7 fast_memory_access enable
\r
22 arm7_9 dcc_downloads enable
\r
25 flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf
\r
26 target_script 0 reset event/zy1000_reset.script
\r
28 # required for usable performance. Used for lots of
\r
29 # other things than flash programming.
\r
30 working_area 0 0x00000000 0x20000 nobackup
\r