5 # tell gdb our flash memory map
7 # enable flash programming
8 gdb_flash_program enable
12 ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
13 ft2232_layout turtelizer2
14 ft2232_vid_pid 0x0403 0xbdc8
19 #use combined on interfaces or targets that can't set TRST/SRST separately
20 reset_config srst_only srst_pulls_trst
23 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
24 jtag_device 4 0x1 0xf 0xe
29 #target <type> <startup mode>
30 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
31 target arm7tdmi little 0 arm7tdmi
33 target_script 0 reset .\prj\at91r40008_reset.script
35 working_area 0 0x3C000 0x4000 nobackup
36 flash bank cfi 0x10000000 0x400000 2 2 0
38 # For more information about the configuration files, take a look at:
39 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger