5 # tell gdb our flash memory map
7 # enable flash programming
8 gdb_flash_program enable
12 ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
13 ft2232_layout turtelizer2
14 ft2232_vid_pid 0x0403 0xbdc8
19 #use combined on interfaces or targets that can't set TRST/SRST separately
20 reset_config srst_only srst_pulls_trst
23 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
24 jtag_device 4 0x1 0xf 0xe
27 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
28 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false
30 target_script 0 reset .\prj\at91r40008_reset.script
32 flash bank cfi 0x10000000 0x400000 2 2 0
34 # For more information about the configuration files, take a look at:
35 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger