]> git.sur5r.net Git - u-boot/blob - tools/rkcommon.h
rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399
[u-boot] / tools / rkcommon.h
1 /*
2  * (C) Copyright 2015 Google,  Inc
3  * Written by Simon Glass <sjg@chromium.org>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef _RKCOMMON_H
9 #define _RKCOMMON_H
10
11 enum {
12         RK_BLK_SIZE             = 512,
13         RK_INIT_OFFSET          = 4,
14         RK_MAX_BOOT_SIZE        = 512 << 10,
15         RK_SPL_HDR_START        = RK_INIT_OFFSET * RK_BLK_SIZE,
16         RK_SPL_HDR_SIZE         = 4,
17         RK_SPL_START            = RK_SPL_HDR_START + RK_SPL_HDR_SIZE,
18         RK_IMAGE_HEADER_LEN     = RK_SPL_START,
19 };
20
21 /**
22  * rkcommon_check_params() - check params
23  *
24  * @return 0 if OK, -1 if ERROR.
25  */
26 int rkcommon_check_params(struct image_tool_params *params);
27
28 /**
29  * rkcommon_get_spl_hdr() - get 4-bytes spl hdr for a Rockchip boot image
30  *
31  * Rockchip's bootrom requires the spl loader to start with a 4-bytes
32  * header. The content of this header depends on the chip type.
33  */
34 const char *rkcommon_get_spl_hdr(struct image_tool_params *params);
35
36 /**
37  * rkcommon_get_spl_hdr_padto8() - check if we need to pad to 8 bytes
38  *
39  * Rockchip's bootrom starts execution right after the SPL header (i.e.
40  * at offset 4), but we can not reasonably align the test section of
41  * an AArch64 SPL at 4 bytes (as this would break natural alignment
42  * and any embedded constants might cause an alignment exception, which
43  * is illegal in privileged modes).
44  *
45  * Padding is (for now) assumed to occur with a single AArch64 'nop'.
46  */
47 const bool rkcommon_get_spl_hdr_padto8(struct image_tool_params *params);
48
49 /**
50  * rkcommon_get_spl_size() - get spl size for a Rockchip boot image
51  *
52  * Different chip may have different sram size. And if we want to jump
53  * back to the bootrom after spl, we may need to reserve some sram space
54  * for the bootrom.
55  * The spl loader size should be sram size minus reserved size(if needed)
56  */
57 int rkcommon_get_spl_size(struct image_tool_params *params);
58
59 /**
60  * rkcommon_set_header() - set up the header for a Rockchip boot image
61  *
62  * This sets up a 2KB header which can be interpreted by the Rockchip boot ROM.
63  *
64  * @buf:        Pointer to header place (must be at least 2KB in size)
65  * @file_size:  Size of the file we want the boot ROM to load, in bytes
66  * @return 0 if OK, -ENOSPC if too large
67  */
68 int rkcommon_set_header(void *buf, uint file_size,
69                         struct image_tool_params *params);
70
71 /**
72  * rkcommon_need_rc4_spl() - check if rc4 encoded spl is required
73  *
74  * Some socs cannot disable the rc4-encryption of the spl binary.
75  * rc4 encryption is disabled normally except on socs that cannot
76  * handle unencrypted binaries.
77  * @return true or false depending on rc4 being required.
78  */
79 bool rkcommon_need_rc4_spl(struct image_tool_params *params);
80
81 /**
82  * rkcommon_rc4_encode_spl() - encode the spl binary
83  *
84  * Encrypts the SPL binary using the generic rc4 key as required
85  * by some socs.
86  *
87  * @buf:        Pointer to the SPL data (header and SPL binary)
88  * @offset:     offset inside buf to start at
89  * @size:       number of bytes to encode
90  */
91 void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size);
92
93 /**
94  * rkcommon_vrec_header() - allocate memory for the header
95  *
96  * @params:     Pointer to the tool params structure
97  * @tparams:    Pointer tot the image type structure (for setting
98  *              the header and header_size)
99  */
100 void rkcommon_vrec_header(struct image_tool_params *params,
101                           struct image_type_params *tparams);
102
103 #endif