* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*
* hacked for Hymod FPGA support by Murray.Jensen@csiro.au, 29-Jan-01
*/
*/
int
-fpga_load (int mezz, uchar *addr, ulong size)
+fpga_load(int mezz, const uchar *addr, ulong size)
{
hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
xlx_info_t *fp;
xlx_iopins_t *fpgaio;
volatile uchar *fpgabase;
volatile uint cnt;
- uchar *eaddr = addr + size;
+ const uchar *eaddr = addr + size;
int result;
if (mezz)
/* ------------------------------------------------------------------------- */
int
-do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
uchar *addr, *save_addr;
ulong size;
load_addr = simple_strtoul (argv[3], NULL, 16);
NetBootFileXferSize = 0;
- if (NetLoop (TFTP) <= 0) {
+ if (NetLoop(TFTPGET) <= 0) {
printf ("tftp transfer failed - aborting "
"fgpa load\n");
return 1;
break;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return cmd_usage(cmdtp);
}
U_BOOT_CMD(
fpga, 6, 1, do_fpga,
- "fpga - FPGA sub-system\n",
+ "FPGA sub-system",
"load [type] addr size\n"
" - write the configuration data at memory address `addr',\n"
" size `size' bytes, into the FPGA of type `type' (either\n"
"fpga info\n"
" - print information about the Hymod FPGA, namely the\n"
" memory addresses at which the four FPGA local bus\n"
- " address spaces appear in the physical address space\n"
+ " address spaces appear in the physical address space"
);
/* ------------------------------------------------------------------------- */
int
-do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
uchar data[HYMOD_EEPROM_SIZE];
- uint addr = CFG_I2C_EEPROM_ADDR;
+ uint addr = CONFIG_SYS_I2C_EEPROM_ADDR;
switch (argc) {
/* fall through ... */
default:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return cmd_usage(cmdtp);
}
memset (data, 0, HYMOD_EEPROM_SIZE);
}
U_BOOT_CMD(
eeclear, 1, 0, do_eecl,
- "eeclear - Clear the eeprom on a Hymod board \n",
+ "Clear the eeprom on a Hymod board",
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
- " Note: the EEPROM write enable jumper must be installed\n"
+ " Note: the EEPROM write enable jumper must be installed"
);
/* ------------------------------------------------------------------------- */
int
-do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#if 0
int rc;