* Authors: Nick Spence <nick.spence@freescale.com>,
* Scott Wood <scottwood@freescale.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
return fsl_elbc_read_byte(mtd);
}
-static int fsl_elbc_read_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_elbc_write_page(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf)
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
{
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static struct fsl_elbc_ctrl *elbc_ctrl;
nand->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
+ nand->options = NAND_NO_SUBPAGE_WRITE;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
nand->controller = &elbc_ctrl->controller;
nand->priv = priv;
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
-#ifdef CONFIG_FSL_ELBC_FMR
- priv->fmr = CONFIG_FSL_ELBC_FMR;
-#else
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
- /*
- * Hardware expects small page has ECCM0, large page has ECCM1
- * when booting from NAND. Board config can override if not
- * booting from NAND.
- */
- if (or & OR_FCM_PGS)
- priv->fmr |= FMR_ECCM;
-#endif
-
/* If CS Base Register selects full hardware ECC then use it */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = 512;
nand->ecc.bytes = 3;
nand->ecc.steps = 1;
+ nand->ecc.strength = 1;
} else {
- /* otherwise fall back to default software ECC */
+ /* otherwise fall back to software ECC */
+#if defined(CONFIG_NAND_ECC_BCH)
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
}
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ return ret;
+
/* Large-page-specific setup */
- if (or & OR_FCM_PGS) {
+ if (mtd->writesize == 2048) {
+ setbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+ OR_FCM_PGS);
+ in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+
priv->page_size = 1;
nand->badblock_pattern = &largepage_memorybased;
+ /*
+ * Hardware expects small page has ECCM0, large page has
+ * ECCM1 when booting from NAND, and we follow that even
+ * when not booting from NAND.
+ */
+ priv->fmr |= FMR_ECCM;
+
/* adjust ecc setup if needed */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.steps = 4;
&fsl_elbc_oob_lp_eccm1 :
&fsl_elbc_oob_lp_eccm0;
}
+ } else if (mtd->writesize == 512) {
+ clrbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+ OR_FCM_PGS);
+ in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+ } else {
+ return -ENODEV;
}
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
ret = nand_scan_tail(mtd);
if (ret)
return ret;