* Values MUST BE UPDATED BEFORE AP ACCESS.
*/
dap->ap_bank_value = -1;
- dap->ap_csw_value = -1;
- dap->ap_tar_value = -1;
}
}
-static int dap_setup_accessport_csw(struct adiv5_dap *dap, uint32_t csw)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
- dap->apcsw[dap->ap_current >> 24];
+ ap->csw_default;
- if (csw != dap->ap_csw_value) {
+ if (csw != ap->csw_value) {
/* LOG_DEBUG("DAP: Set CSW %x",csw); */
- int retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
+ int retval = dap_queue_ap_write(ap->dap, MEM_AP_REG_CSW, csw);
if (retval != ERROR_OK)
return retval;
- dap->ap_csw_value = csw;
+ ap->csw_value = csw;
}
return ERROR_OK;
}
-static int dap_setup_accessport_tar(struct adiv5_dap *dap, uint32_t tar)
+static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
{
- if (tar != dap->ap_tar_value || dap->ap_csw_value & CSW_ADDRINC_MASK) {
+ if (tar != ap->tar_value ||
+ (ap->csw_value & CSW_ADDRINC_MASK)) {
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
- int retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
+ int retval = dap_queue_ap_write(ap->dap, MEM_AP_REG_TAR, tar);
if (retval != ERROR_OK)
return retval;
- dap->ap_tar_value = tar;
+ ap->tar_value = tar;
}
return ERROR_OK;
}
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
*
- * Subsequent transfers using registers like AP_REG_DRW or AP_REG_BD2
+ * Subsequent transfers using registers like MEM_AP_REG_DRW or MEM_AP_REG_BD2
* initiate data reads or writes using memory or peripheral addresses.
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar)
{
int retval;
- retval = dap_setup_accessport_csw(dap, csw);
+ retval = mem_ap_setup_csw(ap, csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_setup_accessport_tar(dap, tar);
+ retval = mem_ap_setup_tar(ap, tar);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_read_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
+ dap_ap_select(ap->dap, ap->ap_num);
+
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap, CSW_32BIT | CSW_ADDRINC_OFF,
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_read(dap, AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(ap->dap, MEM_AP_REG_BD0 | (address & 0xC), value);
}
/**
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-int mem_ap_read_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
- retval = mem_ap_read_u32(dap, address, value);
+ retval = mem_ap_read_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_write_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
int retval;
+ dap_ap_select(ap->dap, ap->ap_num);
+
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap, CSW_32BIT | CSW_ADDRINC_OFF,
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_write(dap, AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(ap->dap, MEM_AP_REG_BD0 | (address & 0xC),
value);
}
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
- int retval = mem_ap_write_u32(dap, address, value);
+ int retval = mem_ap_write_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Synchronous write of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to write. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of writes to do (in size units, not bytes).
* should normally be true, except when writing to e.g. a FIFO.
* @return ERROR_OK on success, otherwise an error code.
*/
-int mem_ap_write(struct adiv5_dap *dap, const uint8_t *buffer, uint32_t size, uint32_t count,
+static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t address, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
return ERROR_TARGET_UNALIGNED_ACCESS;
}
- if (dap->unaligned_access_bad && (address % size != 0))
+ if (ap->unaligned_access_bad && (address % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
+ dap_ap_select(ap->dap, ap->ap_num);
+
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
if (retval != ERROR_OK)
return retval;
uint32_t this_size = size;
/* Select packed transfer if possible */
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
nbytes -= this_size;
- retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
+ retval = dap_queue_ap_write(dap, MEM_AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
/* Rewrite TAR if it wrapped or we're xoring addresses */
- if (addrinc && (addr_xor || (address % dap->tar_autoincr_block < size && nbytes > 0))) {
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
+ if (addrinc && (addr_xor || (address % ap->tar_autoincr_block < size && nbytes > 0))) {
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
if (retval != ERROR_OK)
break;
}
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(dap, AP_REG_TAR, &tar) == ERROR_OK
+ if (dap_queue_ap_read(dap, MEM_AP_REG_TAR, &tar) == ERROR_OK
&& dap_run(dap) == ERROR_OK)
LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
else
/**
* Synchronous read of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to receive the data. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of reads to do (in size units, not bytes).
* should normally be true, except when reading from e.g. a FIFO.
* @return ERROR_OK on success, otherwise an error code.
*/
-int mem_ap_read(struct adiv5_dap *dap, uint8_t *buffer, uint32_t size, uint32_t count,
+static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t adr, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
else
return ERROR_TARGET_UNALIGNED_ACCESS;
- if (dap->unaligned_access_bad && (adr % size != 0))
+ if (ap->unaligned_access_bad && (adr % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
/* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
return ERROR_FAIL;
}
- retval = dap_setup_accessport_tar(dap, address);
+ dap_ap_select(ap->dap, ap->ap_num);
+
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK) {
free(read_buf);
return retval;
uint32_t this_size = size;
/* Select packed transfer if possible */
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
break;
- retval = dap_queue_ap_read(dap, AP_REG_DRW, read_ptr++);
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_DRW, read_ptr++);
if (retval != ERROR_OK)
break;
address += this_size;
/* Rewrite TAR if it wrapped */
- if (addrinc && address % dap->tar_autoincr_block < size && nbytes > 0) {
- retval = dap_setup_accessport_tar(dap, address);
+ if (addrinc && address % ap->tar_autoincr_block < size && nbytes > 0) {
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK)
break;
}
* at least give the caller what we have. */
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(dap, AP_REG_TAR, &tar) == ERROR_OK
+ if (dap_queue_ap_read(dap, MEM_AP_REG_TAR, &tar) == ERROR_OK
&& dap_run(dap) == ERROR_OK) {
LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
if (nbytes > tar - address)
while (nbytes > 0) {
uint32_t this_size = size;
- if (addrinc && dap->packed_transfers && nbytes >= 4
- && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
}
return retval;
}
-/*--------------------------------------------------------------------*/
-/* Wrapping function with selection of AP */
-/*--------------------------------------------------------------------*/
-int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_atomic_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_atomic_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_read_buf(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_read_buf(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read(swjdp, buffer, size, count, address, true);
+ return mem_ap_read(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_write_buf(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_write_buf(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write(swjdp, buffer, size, count, address, true);
+ return mem_ap_write(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_read_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read(swjdp, buffer, size, count, address, false);
+ return mem_ap_read(ap, buffer, size, count, address, false);
}
-int mem_ap_sel_write_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write(swjdp, buffer, size, count, address, false);
+ return mem_ap_write(ap, buffer, size, count, address, false);
}
/*--------------------------------------------------------------------------*/
/*--------------------------------------------------------------------------*/
+/**
+ * Create a new DAP
+ */
+struct adiv5_dap *dap_init(void)
+{
+ struct adiv5_dap *dap = calloc(1, sizeof(struct adiv5_dap));
+ int i;
+ /* Set up with safe defaults */
+ for (i = 0; i <= 255; i++) {
+ dap->ap[i].dap = dap;
+ dap->ap[i].ap_num = i;
+ /* memaccess_tck max is 255 */
+ dap->ap[i].memaccess_tck = 255;
+ /* Number of bits for tar autoincrement, impl. dep. at least 10 */
+ dap->ap[i].tar_autoincr_block = (1<<10);
+ }
+ dap->ap_current = -1;
+ dap->ap_bank_value = -1;
+ dap->dp_bank_value = -1;
+ return dap;
+}
+
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
+ * for further use and activates overrun checking.
*
* @param dap The DAP being initialized.
- *
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
*/
-int ahbap_debugport_init(struct adiv5_dap *dap)
+int dap_dp_init(struct adiv5_dap *dap)
{
int retval;
LOG_DEBUG(" ");
-
/* JTAG-DP or SWJ-DP, in JTAG mode
* ... for SWD mode this is patched as part
* of link switchover
+ * FIXME: This should already be setup by the respective transport specific DAP creation.
*/
if (!dap->ops)
dap->ops = &jtag_dp_ops;
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
- */
- dap->ap_current = !0;
- dap_ap_select(dap, 0);
+ dap->ap_current = -1;
+ dap->ap_bank_value = -1;
+ dap->last_read = NULL;
- /* DP initialization */
+ for (size_t i = 0; i < 10; i++) {
+ /* DP initialization */
- dap->dp_bank_value = 0;
+ dap->dp_bank_value = 0;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ continue;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
- if (retval != ERROR_OK)
- return retval;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
+ if (retval != ERROR_OK)
+ continue;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ continue;
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- return retval;
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ continue;
- /* Check that we have debug power domains activated */
- LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
- CDBGPWRUPACK, CDBGPWRUPACK,
- DAP_POWER_DOMAIN_TIMEOUT);
- if (retval != ERROR_OK)
- return retval;
+ /* Check that we have debug power domains activated */
+ LOG_DEBUG("DAP: wait CDBGPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CDBGPWRUPACK, CDBGPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ continue;
- LOG_DEBUG("DAP: wait CSYSPWRUPACK");
- retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
- CSYSPWRUPACK, CSYSPWRUPACK,
- DAP_POWER_DOMAIN_TIMEOUT);
- if (retval != ERROR_OK)
- return retval;
+ LOG_DEBUG("DAP: wait CSYSPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CSYSPWRUPACK, CSYSPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ continue;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
- /* With debug power on we can activate OVERRUN checking */
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ continue;
+ /* With debug power on we can activate OVERRUN checking */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ continue;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ continue;
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ continue;
+
+ break;
+ }
+
+ return retval;
+}
+
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
+ *
+ * @param ap The MEM-AP being initialized.
+ */
+int mem_ap_init(struct adiv5_ap *ap)
+{
/* check that we support packed transfers */
uint32_t csw, cfg;
+ int retval;
+ struct adiv5_dap *dap = ap->dap;
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+ dap_ap_select(dap, ap->ap_num);
+
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(dap, AP_REG_CSW, &csw);
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(dap, AP_REG_CFG, &cfg);
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
if (retval != ERROR_OK)
return retval;
return retval;
if (csw & CSW_ADDRINC_PACKED)
- dap->packed_transfers = true;
+ ap->packed_transfers = true;
else
- dap->packed_transfers = false;
+ ap->packed_transfers = false;
/* Packed transfers on TI BE-32 processors do not work correctly in
* many cases. */
if (dap->ti_be_32_quirks)
- dap->packed_transfers = false;
+ ap->packed_transfers = false;
LOG_DEBUG("MEM_AP Packed Transfers: %s",
- dap->packed_transfers ? "enabled" : "disabled");
+ ap->packed_transfers ? "enabled" : "disabled");
/* The ARM ADI spec leaves implementation-defined whether unaligned
* memory accesses work, only work partially, or cause a sticky error.
* and unaligned writes seem to cause a sticky error.
* TODO: it would be nice to have a way to detect whether unaligned
* operations are supported on other processors. */
- dap->unaligned_access_bad = dap->ti_be_32_quirks;
+ ap->unaligned_access_bad = dap->ti_be_32_quirks;
LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
!!(cfg & 0x04), !!(cfg & 0x02), !!(cfg & 0x01));
/*
* This function checks the ID for each access port to find the requested Access Port type
*/
-int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, uint8_t *ap_num_out)
+int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_ap **ap_out)
{
- int ap;
+ int ap_num;
/* Maximum AP number is 255 since the SELECT register is 8 bits */
- for (ap = 0; ap <= 255; ap++) {
+ for (ap_num = 0; ap_num <= 255; ap_num++) {
/* read the IDR register of the Access Port */
uint32_t id_val = 0;
- dap_ap_select(dap, ap);
+ dap_ap_select(dap, ap_num);
int retval = dap_queue_ap_read(dap, AP_REG_IDR, &id_val);
if (retval != ERROR_OK)
* 31-28 : Revision
* 27-24 : JEDEC bank (0x4 for ARM)
* 23-17 : JEDEC code (0x3B for ARM)
- * 16 : Mem-AP
- * 15-8 : Reserved
- * 7-0 : AP Identity (1=AHB-AP 2=APB-AP 0x10=JTAG-AP)
+ * 16-13 : Class (0b1000=Mem-AP)
+ * 12-8 : Reserved
+ * 7-4 : AP Variant (non-zero for JTAG-AP)
+ * 3-0 : AP Type (0=JTAG-AP 1=AHB-AP 2=APB-AP 4=AXI-AP)
*/
/* Reading register for a non-existant AP should not cause an error,
* but just to be sure, try to continue searching if an error does happen.
*/
if ((retval == ERROR_OK) && /* Register read success */
- ((id_val & 0x0FFF0000) == 0x04770000) && /* Jedec codes match */
- ((id_val & 0xFF) == type_to_find)) { /* type matches*/
+ ((id_val & IDR_JEP106) == IDR_JEP106_ARM) && /* Jedec codes match */
+ ((id_val & IDR_TYPE) == type_to_find)) { /* type matches*/
LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
(type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
(type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
(type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown",
- ap, id_val);
+ ap_num, id_val);
- *ap_num_out = ap;
+ *ap_out = &dap->ap[ap_num];
return ERROR_OK;
}
}
LOG_DEBUG("No %s found",
(type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
(type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
(type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown");
return ERROR_FAIL;
}
-int dap_get_debugbase(struct adiv5_dap *dap, int ap,
- uint32_t *out_dbgbase, uint32_t *out_apid)
+int dap_get_debugbase(struct adiv5_ap *ap,
+ uint32_t *dbgbase, uint32_t *apid)
{
- uint32_t ap_old;
+ struct adiv5_dap *dap = ap->dap;
int retval;
- uint32_t dbgbase, apid;
- /* AP address is in bits 31:24 of DP_SELECT */
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ dap_ap_select(dap, ap->ap_num);
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &dbgbase);
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_BASE, dbgbase);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ retval = dap_queue_ap_read(dap, AP_REG_IDR, apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
- /* Excavate the device ID code */
- struct jtag_tap *tap = dap->jtag_info->tap;
- while (tap != NULL) {
- if (tap->hasidcode)
- break;
- tap = tap->next_tap;
- }
- if (tap == NULL || !tap->hasidcode)
- return ERROR_OK;
-
- dap_ap_select(dap, ap_old);
-
- /* The asignment happens only here to prevent modification of these
- * values before they are certain. */
- *out_dbgbase = dbgbase;
- *out_apid = apid;
-
return ERROR_OK;
}
-int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
- uint32_t dbgbase, uint8_t type, uint32_t *addr)
+int dap_lookup_cs_component(struct adiv5_ap *ap,
+ uint32_t dbgbase, uint8_t type, uint32_t *addr, int32_t *idx)
{
- uint32_t ap_old;
uint32_t romentry, entry_offset = 0, component_base, devtype;
- int retval = ERROR_FAIL;
-
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+ int retval;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ *addr = 0;
do {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
+ (romentry & 0xFFFFF000);
if (romentry & 0x1) {
- retval = mem_ap_read_atomic_u32(dap,
+ uint32_t c_cid1;
+ retval = mem_ap_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Can't read component with base address 0x%" PRIx32
+ ", the corresponding core might be turned off", component_base);
+ return retval;
+ }
+ if (((c_cid1 >> 4) & 0x0f) == 1) {
+ retval = dap_lookup_cs_component(ap, component_base,
+ type, addr, idx);
+ if (retval == ERROR_OK)
+ break;
+ if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ return retval;
+ }
+
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
if (retval != ERROR_OK)
return retval;
if ((devtype & 0xff) == type) {
- *addr = component_base;
- retval = ERROR_OK;
- break;
+ if (!*idx) {
+ *addr = component_base;
+ break;
+ } else
+ (*idx)--;
}
}
entry_offset += 4;
} while (romentry > 0);
- dap_ap_select(dap, ap_old);
+ if (!*addr)
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- return retval;
+ return ERROR_OK;
}
static int dap_rom_display(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap, uint32_t dbgbase, int depth)
+ struct adiv5_ap *ap, uint32_t dbgbase, int depth)
{
+ struct adiv5_dap *dap = ap->dap;
int retval;
uint32_t cid0, cid1, cid2, cid3, memtype, romentry;
uint16_t entry_offset;
command_print(cmd_ctx, "\t%sROM table in legacy format", tabs);
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
/* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
for (entry_offset = 0; ; entry_offset += 4) {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
command_print(cmd_ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
uint32_t component_base;
- unsigned part_num;
- char *type, *full;
+ uint32_t part_num;
+ const char *type, *full;
component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
/* IDs are in last 4K section */
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE0, &c_pid0);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE0, &c_pid0);
if (retval != ERROR_OK) {
command_print(cmd_ctx, "\t%s\tCan't read component with base address 0x%" PRIx32
", the corresponding core might be turned off", tabs, component_base);
continue;
}
c_pid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE4, &c_pid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE4, &c_pid1);
if (retval != ERROR_OK)
return retval;
c_pid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE8, &c_pid2);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE8, &c_pid2);
if (retval != ERROR_OK)
return retval;
c_pid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFEC, &c_pid3);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFEC, &c_pid3);
if (retval != ERROR_OK)
return retval;
c_pid3 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFD0, &c_pid4);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFD0, &c_pid4);
if (retval != ERROR_OK)
return retval;
c_pid4 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF0, &c_cid0);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF0, &c_cid0);
if (retval != ERROR_OK)
return retval;
c_cid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF4, &c_cid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF4, &c_cid1);
if (retval != ERROR_OK)
return retval;
c_cid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF8, &c_cid2);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF8, &c_cid2);
if (retval != ERROR_OK)
return retval;
c_cid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap, component_base + 0xFFC, &c_cid3);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFFC, &c_cid3);
if (retval != ERROR_OK)
return retval;
c_cid3 &= 0xff;
if (((c_cid1 >> 4) & 0x0f) == 9) {
uint32_t devtype;
unsigned minor;
- char *major = "Reserved", *subtype = "Reserved";
+ const char *major = "Reserved", *subtype = "Reserved";
- retval = mem_ap_read_atomic_u32(dap,
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
if (retval != ERROR_OK)
type = "Cortex-M3 FBP";
full = "(Flash Patch and Breakpoint)";
break;
+ case 0x008:
+ type = "Cortex-M0 SCS";
+ full = "(System Control Space)";
+ break;
+ case 0x00a:
+ type = "Cortex-M0 DWT";
+ full = "(Data Watchpoint and Trace)";
+ break;
+ case 0x00b:
+ type = "Cortex-M0 BPU";
+ full = "(Breakpoint Unit)";
+ break;
case 0x00c:
type = "Cortex-M4 SCS";
full = "(System Control Space)";
type = "Coresight ITM";
full = "(Instrumentation Trace Macrocell)";
break;
+ case 0x914:
+ type = "Coresight SWO";
+ full = "(Single Wire Output)";
+ break;
case 0x917:
type = "Coresight HTM";
full = "(AHB Trace Macrocell)";
type = "CoreSight Component";
full = "(unidentified Cortex-A9 component)";
break;
+ case 0x961:
+ type = "CoreSight TMC";
+ full = "(Trace Memory Controller)";
+ break;
case 0x962:
type = "CoreSight STM";
full = "(System Trace Macrocell)";
type = "Cortex-M4 TPUI";
full = "(Trace Port Interface Unit)";
break;
+ case 0x9a5:
+ type = "Cortex-A5 ETM";
+ full = "(Embedded Trace)";
+ break;
+ case 0xc05:
+ type = "Cortex-A5 Debug";
+ full = "(Debug Unit)";
+ break;
case 0xc08:
type = "Cortex-A8 Debug";
full = "(Debug Unit)";
type = "Cortex-A9 Debug";
full = "(Debug Unit)";
break;
+ case 0x4af:
+ type = "Cortex-A15 Debug";
+ full = "(Debug Unit)";
+ break;
default:
+ LOG_DEBUG("Unrecognized Part number 0x%" PRIx32, part_num);
type = "-*- unrecognized -*-";
full = "";
break;
/* ROM Table? */
if (((c_cid1 >> 4) & 0x0f) == 1) {
- retval = dap_rom_display(cmd_ctx, dap, ap, component_base, depth + 1);
+ retval = dap_rom_display(cmd_ctx, ap, component_base, depth + 1);
if (retval != ERROR_OK)
return retval;
}
}
static int dap_info_command(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap)
+ struct adiv5_ap *ap)
{
int retval;
- uint32_t dbgbase = 0, apid = 0; /* Silence gcc by initializing */
+ uint32_t dbgbase, apid;
int romtable_present = 0;
uint8_t mem_ap;
- uint32_t ap_old;
- retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
+ retval = dap_get_debugbase(ap, &dbgbase, &apid);
if (retval != ERROR_OK)
return retval;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
-
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid) {
- switch (apid&0x0F) {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
- break;
- }
+ if (apid == 0) {
+ command_print(cmd_ctx, "No AP found at this ap 0x%x", ap->ap_num);
+ return ERROR_FAIL;
+ }
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32, dbgbase);
- } else
- command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
-
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present) {
- dap_rom_display(cmd_ctx, dap, ap, dbgbase, 0);
- } else
- command_print(cmd_ctx, "\tNo ROM table present");
- dap_ap_select(dap, ap_old);
+ switch (apid & (IDR_JEP106 | IDR_TYPE)) {
+ case IDR_JEP106_ARM | AP_TYPE_JTAG_AP:
+ command_print(cmd_ctx, "\tType is JTAG-AP");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AHB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AHB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_APB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP APB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AXI_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AXI");
+ break;
+ default:
+ command_print(cmd_ctx, "\tUnknown AP type");
+ break;
+ }
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP;
+ if (mem_ap) {
+ command_print(cmd_ctx, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase);
+
+ romtable_present = dbgbase != 0xFFFFFFFF;
+ if (romtable_present)
+ dap_rom_display(cmd_ctx, ap, dbgbase, 0);
+ else
+ command_print(cmd_ctx, "\tNo ROM table present");
+ }
return ERROR_OK;
}
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ if (apsel >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- return dap_info_command(CMD_CTX, dap, apsel);
+ return dap_info_command(CMD_CTX, &dap->ap[apsel]);
}
COMMAND_HANDLER(dap_baseaddr_command)
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &baseaddr);
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_BASE, &baseaddr);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
switch (CMD_ARGC) {
case 0:
- memaccess_tck = dap->memaccess_tck;
+ memaccess_tck = dap->ap[dap->apsel].memaccess_tck;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->memaccess_tck = memaccess_tck;
+ dap->ap[dap->apsel].memaccess_tck = memaccess_tck;
command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
- dap->memaccess_tck);
+ dap->ap[dap->apsel].memaccess_tck);
return ERROR_OK;
}
switch (CMD_ARGC) {
case 0:
- apsel = 0;
+ apsel = dap->apsel;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
struct arm *arm = target_to_arm(target);
struct adiv5_dap *dap = arm->dap;
- uint32_t apcsw = dap->apcsw[dap->apsel], sprot = 0;
+ uint32_t apcsw = dap->ap[dap->apsel].csw_default, sprot = 0;
switch (CMD_ARGC) {
case 0:
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->apcsw[dap->apsel] = apcsw;
+ dap->ap[dap->apsel].csw_default = apcsw;
return 0;
}