tools/imximage: set DCD pointer to NULL when its length is 0

[u-boot] / README

diff --git a/README b/README
index b564640b017a3c271adb494554020710bf9bcdf0..1acc3559680c73c8e116a8be57a7d97d65c6d18e 100644 (file)
--- a/README
+++ b/README
@@ -705,6 +705,7 @@ The following options need to be configured:
                CONFIG_ARM_ERRATA_454179
                CONFIG_ARM_ERRATA_621766
                CONFIG_ARM_ERRATA_798870
                CONFIG_ARM_ERRATA_454179
                CONFIG_ARM_ERRATA_621766
                CONFIG_ARM_ERRATA_798870

+               CONFIG_ARM_ERRATA_801819

 
 - Tegra SoC options:
                CONFIG_TEGRA_SUPPORT_NON_SECURE
 
 - Tegra SoC options:
                CONFIG_TEGRA_SUPPORT_NON_SECURE


@@ -1381,9 +1382,6 @@ The following options need to be configured:
                Management command for E1000 devices.  When used on devices
                with SPI support you can reprogram the EEPROM from U-Boot.
 
                Management command for E1000 devices.  When used on devices
                with SPI support you can reprogram the EEPROM from U-Boot.
 

-               CONFIG_E1000_FALLBACK_MAC
-               default MAC for empty EEPROM after production.
-

                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM


@@ -1496,12 +1494,6 @@ The following options need to be configured:
                Support for i2c bus TPM devices. Only one device
                per system is supported at this time.
 
                Support for i2c bus TPM devices. Only one device
                per system is supported at this time.
 

-                       CONFIG_TPM_TIS_I2C_BUS_NUMBER
-                       Define the the i2c bus number for the TPM device
-
-                       CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
-                       Define the TPM's address on the i2c bus
-

                        CONFIG_TPM_TIS_I2C_BURST_LIMITATION
                        Define the burst count bytes upper limit
 
                        CONFIG_TPM_TIS_I2C_BURST_LIMITATION
                        Define the burst count bytes upper limit
 


@@ -1671,7 +1663,7 @@ The following options need to be configured:
                key for the Replay Protection Memory Block partition in eMMC.
 
 - USB Device Firmware Update (DFU) class support:
                key for the Replay Protection Memory Block partition in eMMC.
 
 - USB Device Firmware Update (DFU) class support:

-               CONFIG_DFU_FUNCTION
+               CONFIG_USB_FUNCTION_DFU

                This enables the USB portion of the DFU USB class
 
                CONFIG_CMD_DFU
                This enables the USB portion of the DFU USB class
 
                CONFIG_CMD_DFU


@@ -1716,6 +1708,9 @@ The following options need to be configured:
                sending again an USB request to the device.
 
 - USB Device Android Fastboot support:
                sending again an USB request to the device.
 
 - USB Device Android Fastboot support:

+               CONFIG_USB_FUNCTION_FASTBOOT
+               This enables the USB part of the fastboot gadget
+

                CONFIG_CMD_FASTBOOT
                This enables the command "fastboot" which enables the Android
                fastboot mode for the platform's USB device. Fastboot is a USB
                CONFIG_CMD_FASTBOOT
                This enables the command "fastboot" which enables the Android
                fastboot mode for the platform's USB device. Fastboot is a USB


@@ -1727,12 +1722,12 @@ The following options need to be configured:
                This enables support for booting images which use the Android
                image format header.
 
                This enables support for booting images which use the Android
                image format header.
 

-               CONFIG_USB_FASTBOOT_BUF_ADDR
+               CONFIG_FASTBOOT_BUF_ADDR

                The fastboot protocol requires a large memory buffer for
                downloads. Define this to the starting RAM address to use for
                downloaded images.
 
                The fastboot protocol requires a large memory buffer for
                downloads. Define this to the starting RAM address to use for
                downloaded images.
 

-               CONFIG_USB_FASTBOOT_BUF_SIZE
+               CONFIG_FASTBOOT_BUF_SIZE

                The fastboot protocol requires a large memory buffer for
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.
                The fastboot protocol requires a large memory buffer for
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.


@@ -5078,6 +5073,18 @@ This firmware often needs to be loaded during U-Boot booting.
 - CONFIG_SYS_MEM_TOP_HIDE_MIN
        Define minimum DDR size to be hided from top of the DDR memory
 
 - CONFIG_SYS_MEM_TOP_HIDE_MIN
        Define minimum DDR size to be hided from top of the DDR memory
 

+Reproducible builds
+-------------------
+
+In order to achieve reproducible builds, timestamps used in the U-Boot build
+process have to be set to a fixed value.
+
+This is done using the SOURCE_DATE_EPOCH environment variable.
+SOURCE_DATE_EPOCH is to be set on the build host's shell, not as a configuration
+option for U-Boot or an environment variable in U-Boot.
+
+SOURCE_DATE_EPOCH should be set to a number of seconds since the epoch, in UTC.
+

 Building the Software:
 ======================
 
 Building the Software:
 ======================