net/phy: refactor RTL8211F initialization

[u-boot] / README

diff --git a/README b/README
index 82224f75e4964a21d92a425eb12e9de6508b5a5a..1ea397a35cadd7efcb7008e815ea13074320794c 100644 (file)
--- a/README
+++ b/README
@@ -690,6 +690,14 @@ The following options need to be configured:
                exists, unlike the similar options in the Linux kernel. Do not
                set these options unless they apply!
 
                exists, unlike the similar options in the Linux kernel. Do not
                set these options unless they apply!
 

+               COUNTER_FREQUENCY
+               Generic timer clock source frequency.
+
+               COUNTER_FREQUENCY_REAL
+               Generic timer clock source frequency if the real clock is
+               different from COUNTER_FREQUENCY, and can only be determined
+               at run time.
+

                NOTE: The following can be machine specific errata. These
                do have ability to provide rudimentary version and machine
                specific checks, but expect no product checks.
                NOTE: The following can be machine specific errata. These
                do have ability to provide rudimentary version and machine
                specific checks, but expect no product checks.


@@ -1865,12 +1873,6 @@ CBFS (Coreboot Filesystem) support
                boot.  See the documentation file README.video for a
                description of this variable.
 
                boot.  See the documentation file README.video for a
                description of this variable.
 

-               CONFIG_VIDEO_VGA
-
-               Enable the VGA video / BIOS for x86. The alternative if you
-               are using coreboot is to use the coreboot frame buffer
-               driver.
-

 
 - Keyboard Support:
                CONFIG_KEYBOARD
 
 - Keyboard Support:
                CONFIG_KEYBOARD


@@ -2395,6 +2397,8 @@ CBFS (Coreboot Filesystem) support
                  - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
                If those defines are not set, default value is 100000
                for speed, and 0 for slave.
                  - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
                If those defines are not set, default value is 100000
                for speed, and 0 for slave.

+                 - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
+                 - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4

 
                - drivers/i2c/rcar_i2c.c:
                  - activate this driver with CONFIG_SYS_I2C_RCAR
 
                - drivers/i2c/rcar_i2c.c:
                  - activate this driver with CONFIG_SYS_I2C_RCAR


@@ -4871,6 +4875,9 @@ Low Level (hardware related) configuration options:
 - CONFIG_FSL_DDR_SYNC_REFRESH
                Enable sync of refresh for multiple controllers.
 
 - CONFIG_FSL_DDR_SYNC_REFRESH
                Enable sync of refresh for multiple controllers.
 

+- CONFIG_FSL_DDR_BIST
+               Enable built-in memory test for Freescale DDR controllers.
+

 - CONFIG_SYS_83XX_DDR_USES_CS0
                Only for 83xx systems. If specified, then DDR should
                be configured using CS0 and CS1 instead of CS2 and CS3.
 - CONFIG_SYS_83XX_DDR_USES_CS0
                Only for 83xx systems. If specified, then DDR should
                be configured using CS0 and CS1 instead of CS2 and CS3.


@@ -5466,7 +5473,7 @@ loaded to, and "Flash Location" gives the image's address in NOR
 flash or offset in NAND flash.
 
 *Note* - these variables don't have to be defined for all boards, some
 flash or offset in NAND flash.
 
 *Note* - these variables don't have to be defined for all boards, some

-boards currenlty use other variables for these purposes, and some
+boards currently use other variables for these purposes, and some

 boards use these variables for other purposes.
 
 Image              File Name        RAM Address       Flash Location
 boards use these variables for other purposes.
 
 Image              File Name        RAM Address       Flash Location