common lcd: simplify lcd_display

[u-boot] / README

diff --git a/README b/README
index 79016e690ace8899488e54ee7a35e1715018e9a2..4428205b86aa5273c95ca6f820667ffb5d63e2d8 100644 (file)
--- a/README
+++ b/README
@@ -374,6 +374,15 @@ The following options need to be configured:
                Defines the string to utilize when trying to match PCIe device
                tree nodes for the given platform.
 
                Defines the string to utilize when trying to match PCIe device
                tree nodes for the given platform.
 

+               CONFIG_SYS_PPC_E500_DEBUG_TLB
+
+               Enables a temporary TLB entry to be used during boot to work
+               around limitations in e500v1 and e500v2 external debugger
+               support. This reduces the portions of the boot code where
+               breakpoints and single stepping do not work.  The value of this
+               symbol should be set to the TLB1 entry to be used for this
+               purpose.
+

 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 


@@ -432,6 +441,14 @@ The following options need to be configured:
                Select high exception vectors of the ARM core, e.g., do not
                clear the V bit of the c1 register of CP15.
 
                Select high exception vectors of the ARM core, e.g., do not
                clear the V bit of the c1 register of CP15.
 

+               CONFIG_SYS_THUMB_BUILD
+
+               Use this flag to build U-Boot using the Thumb instruction
+               set for ARM architectures. Thumb instruction set provides
+               better code density. For ARM architectures that support
+               Thumb2 this flag will result in Thumb2 code generated by
+               GCC.
+

 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 
 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 


@@ -727,8 +744,8 @@ The following options need to be configured:
 - Monitor Functions:
                Monitor commands can be included or excluded
                from the build by using the #include files
 - Monitor Functions:
                Monitor commands can be included or excluded
                from the build by using the #include files

-               "config_cmd_all.h" and #undef'ing unwanted
-               commands, or using "config_cmd_default.h"
+               <config_cmd_all.h> and #undef'ing unwanted
+               commands, or using <config_cmd_default.h>

                and augmenting with additional #define's
                for wanted commands.
 
                and augmenting with additional #define's
                for wanted commands.
 


@@ -777,6 +794,8 @@ The following options need to be configured:
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb
                CONFIG_CMD_LDRINFO        ldrinfo (display Blackfin loader)
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb
                CONFIG_CMD_LDRINFO        ldrinfo (display Blackfin loader)

+               CONFIG_CMD_LINK_LOCAL   * link-local IP address auto-configuration
+                                         (169.254.*.*)

                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads
                CONFIG_CMD_MD5SUM         print md5 message digest
                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads
                CONFIG_CMD_MD5SUM         print md5 message digest


@@ -888,7 +907,8 @@ The following options need to be configured:
                If this variable is defined, an environment variable
                named "ver" is created by U-Boot showing the U-Boot
                version as printed by the "version" command.
                If this variable is defined, an environment variable
                named "ver" is created by U-Boot showing the U-Boot
                version as printed by the "version" command.

-               This variable is readonly.
+               Any change to this variable will be reverted at the
+               next reset.

 
 - Real-Time Clock:
 
 
 - Real-Time Clock:
 


@@ -931,13 +951,20 @@ The following options need to be configured:
                commands like bootm or iminfo. This option is
                automatically enabled when you select CONFIG_CMD_DATE .
 
                commands like bootm or iminfo. This option is
                automatically enabled when you select CONFIG_CMD_DATE .
 

-- Partition Support:
-               CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
-               and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION
+- Partition Labels (disklabels) Supported:
+               Zero or more of the following:
+               CONFIG_MAC_PARTITION   Apple's MacOS partition table.
+               CONFIG_DOS_PARTITION   MS Dos partition table, traditional on the
+                                      Intel architecture, USB sticks, etc.
+               CONFIG_ISO_PARTITION   ISO partition table, used on CDROM etc.
+               CONFIG_EFI_PARTITION   GPT partition table, common when EFI is the
+                                      bootloader.  Note 2TB partition limit; see
+                                      disk/part_efi.c
+               CONFIG_MTD_PARTITIONS  Memory Technology Device partition table.

 
                If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
                CONFIG_CMD_SCSI) you must configure support for at
 
                If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
                CONFIG_CMD_SCSI) you must configure support for at

-               least one partition type as well.
+               least one non-MTD partition type as well.

 
 - IDE Reset method:
                CONFIG_IDE_RESET_ROUTINE - this is defined in several
 
 - IDE Reset method:
                CONFIG_IDE_RESET_ROUTINE - this is defined in several


@@ -1584,10 +1611,17 @@ The following options need to be configured:
                CONFIG_BOOTP_NTPSERVER
                CONFIG_BOOTP_TIMEOFFSET
                CONFIG_BOOTP_VENDOREX
                CONFIG_BOOTP_NTPSERVER
                CONFIG_BOOTP_TIMEOFFSET
                CONFIG_BOOTP_VENDOREX

+               CONFIG_BOOTP_MAY_FAIL

 
                CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
                environment variable, not the BOOTP server.
 
 
                CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
                environment variable, not the BOOTP server.
 

+               CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found
+               after the configured retry count, the call will fail
+               instead of starting over.  This can be used to fail over
+               to Link-local IP address configuration if the DHCP server
+               is not available.
+

                CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
                serverip from a DHCP server, it is possible that more
                than one DNS serverip is offered to the client.
                CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
                serverip from a DHCP server, it is possible that more
                than one DNS serverip is offered to the client.


@@ -1618,6 +1652,14 @@ The following options need to be configured:
                the DHCP timeout and retry process takes a longer than
                this delay.
 
                the DHCP timeout and retry process takes a longer than
                this delay.
 

+ - Link-local IP address negotiation:
+               Negotiate with other link-local clients on the local network
+               for an address that doesn't require explicit configuration.
+               This is especially useful if a DHCP server cannot be guaranteed
+               to exist in all environments that the device must operate.
+
+               See doc/README.link-local for more information.
+

  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 
  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 


@@ -2115,6 +2157,13 @@ The following options need to be configured:
 
                Timeout waiting for an ARP reply in milliseconds.
 
 
                Timeout waiting for an ARP reply in milliseconds.
 

+               CONFIG_NFS_TIMEOUT
+
+               Timeout in milliseconds used in NFS protocol.
+               If you encounter "ERROR: Cannot umount" in nfs command,
+               try longer timeout such as
+               #define CONFIG_NFS_TIMEOUT 10000UL
+

 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 
 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 


@@ -2195,6 +2244,20 @@ The following options need to be configured:
                the environment like the "source" command or the
                boot command first.
 
                the environment like the "source" command or the
                boot command first.
 

+               CONFIG_ENV_VARS_UBOOT_CONFIG
+
+               Define this in order to add variables describing the
+               U-Boot build configuration to the default environment.
+               These will be named arch, cpu, board, vendor, and soc.
+
+               Enabling this option will cause the following to be defined:
+
+               - CONFIG_SYS_ARCH
+               - CONFIG_SYS_CPU
+               - CONFIG_SYS_BOARD
+               - CONFIG_SYS_VENDOR
+               - CONFIG_SYS_SOC
+

 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 
 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 


@@ -3322,6 +3385,13 @@ Low Level (hardware related) configuration options:
                Disable PCI-Express on systems where it is supported but not
                required.
 
                Disable PCI-Express on systems where it is supported but not
                required.
 

+- CONFIG_PCI_ENUM_ONLY
+               Only scan through and get the devices on the busses.
+               Don't do any setup work, presumably because someone or
+               something has already done it, and we don't need to do it
+               a second time.  Useful for platforms that are pre-booted
+               by coreboot or similar.
+

 - CONFIG_SYS_SRIO:
                Chip has SRIO or not
 
 - CONFIG_SYS_SRIO:
                Chip has SRIO or not