arm/km: portl2 environment address update to P1B

[u-boot] / README

diff --git a/README b/README
index a1910dcfea0af9418851401fe1412e85ed9177ec..46f062f1b4c115ec21fd58264b96d85aa0966d33 100644 (file)
--- a/README
+++ b/README
@@ -134,7 +134,7 @@ Additional fields (if present) indicate release candidates or bug fix
 releases in "stable" maintenance trees.
 
 Examples:
 releases in "stable" maintenance trees.
 
 Examples:

-       U-Boot v2009.11     - Release November 2009
+       U-Boot v2009.11     - Release November 2009

        U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
        U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
 
        U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
        U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
 


@@ -769,7 +769,7 @@ The following options need to be configured:
                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot
                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands
                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot
                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands

-               CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command
+               CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command

                CONFIG_CMD_PCI          * pciinfo
                CONFIG_CMD_PCMCIA               * PCMCIA support
                CONFIG_CMD_PING         * send ICMP ECHO_REQUEST to network
                CONFIG_CMD_PCI          * pciinfo
                CONFIG_CMD_PCMCIA               * PCMCIA support
                CONFIG_CMD_PING         * send ICMP ECHO_REQUEST to network


@@ -876,7 +876,7 @@ The following options need to be configured:
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC

-               CONFIG_RTC_MC13783      - use MC13783 RTC
+               CONFIG_RTC_MC13XXX      - use MC13783 or MC13892 RTC

                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC
                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC


@@ -957,7 +957,20 @@ The following options need to be configured:
 
 - NETWORK Support (PCI):
                CONFIG_E1000
 
 - NETWORK Support (PCI):
                CONFIG_E1000

-               Support for Intel 8254x gigabit chips.
+               Support for Intel 8254x/8257x gigabit chips.
+
+               CONFIG_E1000_SPI
+               Utility code for direct access to the SPI bus on Intel 8257x.
+               This does not do anything useful unless you set at least one
+               of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+               CONFIG_E1000_SPI_GENERIC
+               Allow generic access to the SPI bus on the Intel 8257x, for
+               example with the "sspi" command.
+
+               CONFIG_CMD_E1000
+               Management command for E1000 devices.  When used on devices
+               with SPI support you can reprogram the EEPROM from U-Boot.

 
                CONFIG_E1000_FALLBACK_MAC
                default MAC for empty EEPROM after production.
 
                CONFIG_E1000_FALLBACK_MAC
                default MAC for empty EEPROM after production.


@@ -1432,18 +1445,37 @@ The following options need to be configured:
                Define a default value for the IP address to use for
                the default Ethernet interface, in case this is not
                determined through e.g. bootp.
                Define a default value for the IP address to use for
                the default Ethernet interface, in case this is not
                determined through e.g. bootp.

+               (Environment variable "ipaddr")

 
 - Server IP address:
                CONFIG_SERVERIP
 
                Defines a default value for the IP address of a TFTP
                server to contact when using the "tftboot" command.
 
 - Server IP address:
                CONFIG_SERVERIP
 
                Defines a default value for the IP address of a TFTP
                server to contact when using the "tftboot" command.

+               (Environment variable "serverip")

 
                CONFIG_KEEP_SERVERADDR
 
                Keeps the server's MAC address, in the env 'serveraddr'
                for passing to bootargs (like Linux's netconsole option)
 
 
                CONFIG_KEEP_SERVERADDR
 
                Keeps the server's MAC address, in the env 'serveraddr'
                for passing to bootargs (like Linux's netconsole option)
 

+- Gateway IP address:
+               CONFIG_GATEWAYIP
+
+               Defines a default value for the IP address of the
+               default router where packets to other networks are
+               sent to.
+               (Environment variable "gatewayip")
+
+- Subnet mask:
+               CONFIG_NETMASK
+
+               Defines a default value for the subnet mask (or
+               routing prefix) which is used to determine if an IP
+               address belongs to the local subnet or needs to be
+               forwarded through a router.
+               (Environment variable "netmask")
+

 - Multicast TFTP Mode:
                CONFIG_MCAST_TFTP
 
 - Multicast TFTP Mode:
                CONFIG_MCAST_TFTP
 


@@ -1730,24 +1762,24 @@ The following options need to be configured:
                CONFIG_I2C_MULTI_BUS
 
                This option allows the use of multiple I2C buses, each of which
                CONFIG_I2C_MULTI_BUS
 
                This option allows the use of multiple I2C buses, each of which

-               must have a controller.  At any point in time, only one bus is
-               active.  To switch to a different bus, use the 'i2c dev' command.
+               must have a controller.  At any point in time, only one bus is
+               active.  To switch to a different bus, use the 'i2c dev' command.

                Note that bus numbering is zero-based.
 
                CONFIG_SYS_I2C_NOPROBES
 
                This option specifies a list of I2C devices that will be skipped
                Note that bus numbering is zero-based.
 
                CONFIG_SYS_I2C_NOPROBES
 
                This option specifies a list of I2C devices that will be skipped

-               when the 'i2c probe' command is issued.  If CONFIG_I2C_MULTI_BUS
+               when the 'i2c probe' command is issued.  If CONFIG_I2C_MULTI_BUS

                is set, specify a list of bus-device pairs.  Otherwise, specify
                a 1D array of device addresses
 
                e.g.
                        #undef  CONFIG_I2C_MULTI_BUS
                is set, specify a list of bus-device pairs.  Otherwise, specify
                a 1D array of device addresses
 
                e.g.
                        #undef  CONFIG_I2C_MULTI_BUS

-                       #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68}
+                       #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68}

 
                will skip addresses 0x50 and 0x68 on a board with one I2C bus
 
 
                will skip addresses 0x50 and 0x68 on a board with one I2C bus
 

-                       #define CONFIG_I2C_MULTI_BUS
+                       #define CONFIG_I2C_MULTI_BUS

                        #define CONFIG_SYS_I2C_MULTI_NOPROBES   {{0,0x50},{0,0x68},{1,0x54}}
 
                will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
                        #define CONFIG_SYS_I2C_MULTI_NOPROBES   {{0,0x50},{0,0x68},{1,0x54}}
 
                will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1


@@ -1866,7 +1898,7 @@ The following options need to be configured:
                Enables a hardware SPI driver for general-purpose reads
                and writes.  As with CONFIG_SOFT_SPI, the board configuration
                must define a list of chip-select function pointers.
                Enables a hardware SPI driver for general-purpose reads
                and writes.  As with CONFIG_SOFT_SPI, the board configuration
                must define a list of chip-select function pointers.

-               Currently supported on some MPC8xxx processors.  For an
+               Currently supported on some MPC8xxx processors.  For an

                example, see include/configs/mpc8349emds.h.
 
                CONFIG_MXC_SPI
                example, see include/configs/mpc8349emds.h.
 
                CONFIG_MXC_SPI


@@ -2181,7 +2213,7 @@ Legacy uImage format:
    13  common/image.c          Start multifile image verification
    14  common/image.c          No initial ramdisk, no multifile, continue.
 
    13  common/image.c          Start multifile image verification
    14  common/image.c          No initial ramdisk, no multifile, continue.
 

-   15  arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
+   15  arch/<arch>/lib/bootm.c All preparation done, transferring control to OS

 
   -30  arch/powerpc/lib/board.c        Fatal error, hang the system
   -31  post/post.c             POST test failed, detected by post_output_backlog()
 
   -30  arch/powerpc/lib/board.c        Fatal error, hang the system
   -31  post/post.c             POST test failed, detected by post_output_backlog()


@@ -2428,6 +2460,20 @@ Modem Support:
 
                See also: doc/README.Modem
 
 
                See also: doc/README.Modem
 

+Board initialization settings:
+------------------------------
+
+During Initialization u-boot calls a number of board specific functions
+to allow the preparation of board specific prerequisites, e.g. pin setup
+before drivers are initialized. To enable these callbacks the
+following configuration macros have to be defined. Currently this is
+architecture specific, so please check arch/your_architecture/lib/board.c
+typically in board_init_f() and board_init_r().
+
+- CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f()
+- CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r()
+- CONFIG_BOARD_LATE_INIT: Call board_late_init()
+- CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init()

 
 Configuration Settings:
 -----------------------
 
 Configuration Settings:
 -----------------------


@@ -2545,7 +2591,7 @@ Configuration Settings:
                used) must be put below this limit, unless "bootm_low"
                enviroment variable is defined and non-zero. In such case
                all data for the Linux kernel must be between "bootm_low"
                used) must be put below this limit, unless "bootm_low"
                enviroment variable is defined and non-zero. In such case
                all data for the Linux kernel must be between "bootm_low"

-               and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.  The environment
+               and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.  The environment

                variable "bootm_mapsize" will override the value of
                CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.
                variable "bootm_mapsize" will override the value of
                CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.


@@ -2835,7 +2881,7 @@ to save the current settings.
          This setting describes a second storage area of CONFIG_ENV_SIZE
          size used to hold a redundant copy of the environment data, so
          that there is a valid backup copy in case there is a power failure
          This setting describes a second storage area of CONFIG_ENV_SIZE
          size used to hold a redundant copy of the environment data, so
          that there is a valid backup copy in case there is a power failure

-         during a "saveenv" operation.  CONFIG_ENV_OFFSET_RENDUND must be
+         during a "saveenv" operation.  CONFIG_ENV_OFFSET_RENDUND must be

          aligned to an erase block boundary.
 
        - CONFIG_ENV_RANGE (optional):
          aligned to an erase block boundary.
 
        - CONFIG_ENV_RANGE (optional):


@@ -2929,7 +2975,7 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_CCSRBAR_PHYS:
                Physical address of CCSR.  CCSR can be relocated to a new
                physical address, if desired.  In this case, this macro should
 - CONFIG_SYS_CCSRBAR_PHYS:
                Physical address of CCSR.  CCSR can be relocated to a new
                physical address, if desired.  In this case, this macro should

-               be set to that address.  Otherwise, it should be set to the
+               be set to that address.  Otherwise, it should be set to the

                same value as CONFIG_SYS_CCSRBAR_DEFAULT.  For example, CCSR
                is typically relocated on 36-bit builds.  It is recommended
                that this macro be defined via the _HIGH and _LOW macros:
                same value as CONFIG_SYS_CCSRBAR_DEFAULT.  For example, CCSR
                is typically relocated on 36-bit builds.  It is recommended
                that this macro be defined via the _HIGH and _LOW macros:


@@ -3461,7 +3507,7 @@ List of environment variables (most likely not complete):
                  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and
                  bootm_mapsize.
 
                  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and
                  bootm_mapsize.
 

-  bootm_mapsize        - Size of the initial memory mapping for the Linux kernel.
+  bootm_mapsize - Size of the initial memory mapping for the Linux kernel.

                  This variable is given as a hexadecimal number and it
                  defines the size of the memory region starting at base
                  address bootm_low that is accessible by the Linux kernel
                  This variable is given as a hexadecimal number and it
                  defines the size of the memory region starting at base
                  address bootm_low that is accessible by the Linux kernel


@@ -3615,12 +3661,12 @@ flash or offset in NAND flash.
 boards currenlty use other variables for these purposes, and some
 boards use these variables for other purposes.
 
 boards currenlty use other variables for these purposes, and some
 boards use these variables for other purposes.
 

-Image               File Name        RAM Address       Flash Location
------               ---------        -----------       --------------
-u-boot              u-boot           u-boot_addr_r     u-boot_addr
-Linux kernel        bootfile         kernel_addr_r     kernel_addr
-device tree blob    fdtfile          fdt_addr_r        fdt_addr
-ramdisk             ramdiskfile      ramdisk_addr_r    ramdisk_addr
+Image              File Name        RAM Address       Flash Location
+-----              ---------        -----------       --------------
+u-boot             u-boot           u-boot_addr_r     u-boot_addr
+Linux kernel       bootfile         kernel_addr_r     kernel_addr
+device tree blob    fdtfile         fdt_addr_r        fdt_addr
+ramdisk                    ramdiskfile      ramdisk_addr_r    ramdisk_addr

 
 The following environment variables may be used and automatically
 updated by the network boot commands ("bootp" and "rarpboot"),
 
 The following environment variables may be used and automatically
 updated by the network boot commands ("bootp" and "rarpboot"),


@@ -3735,7 +3781,7 @@ o If neither SROM nor the environment contain a MAC address, an error
   is raised.
 
 If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses
   is raised.
 
 If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses

-will be programmed into hardware as part of the initialization process.  This
+will be programmed into hardware as part of the initialization process.         This

 may be skipped by setting the appropriate 'ethmacskip' environment variable.
 The naming convention is as follows:
 "ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc.
 may be skipped by setting the appropriate 'ethmacskip' environment variable.
 The naming convention is as follows:
 "ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc.