x86: queensbay: Adapt FSP support codes

[u-boot] / README

diff --git a/README b/README
index e7cd1bcb436dff45feb2be387eaee30323cc15ae..4ca04d0489ed3dcd3f04f403cc527f633746f1c2 100644 (file)
--- a/README
+++ b/README
@@ -409,6 +409,10 @@ The following options need to be configured:
                Enables a workaround for IFC erratum A003399. It is only
                requred during NOR boot.
 
                Enables a workaround for IFC erratum A003399. It is only
                requred during NOR boot.
 

+               CONFIG_A008044_WORKAROUND
+               Enables a workaround for T1040/T1042 erratum A008044. It is only
+               requred during NAND boot and valid for Rev 1.0 SoC revision
+

                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600
                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600


@@ -783,6 +787,13 @@ The following options need to be configured:
                Board code has addition modification that it wants to make
                to the flat device tree before handing it off to the kernel
 
                Board code has addition modification that it wants to make
                to the flat device tree before handing it off to the kernel
 

+               CONFIG_OF_SYSTEM_SETUP
+
+               Other code has addition modification that it wants to make
+               to the flat device tree before handing it off to the kernel.
+               This causes ft_system_setup() to be called before booting
+               the kernel.
+

                CONFIG_OF_BOOT_CPU
 
                This define fills in the correct boot CPU in the boot
                CONFIG_OF_BOOT_CPU
 
                This define fills in the correct boot CPU in the boot


@@ -3510,7 +3521,7 @@ FIT uImage format:
                to 128 or 256, although it does not have to be power of 2).
 
                default: 4096
                to 128 or 256, although it does not have to be power of 2).
 
                default: 4096

-               
+

                CONFIG_MTD_UBI_BEB_LIMIT
                This option specifies the maximum bad physical eraseblocks UBI
                expects on the MTD device (per 1024 eraseblocks). If the
                CONFIG_MTD_UBI_BEB_LIMIT
                This option specifies the maximum bad physical eraseblocks UBI
                expects on the MTD device (per 1024 eraseblocks). If the


@@ -3650,10 +3661,13 @@ FIT uImage format:
 
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
                CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
 
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
                CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,

-               CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
-               Address, size and partition on the MMC to load U-Boot from
+               Address and partition on the MMC to load U-Boot from

                when the MMC is being used in raw mode.
 
                when the MMC is being used in raw mode.
 

+               CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+               Partition on the MMC to load U-Boot from when the MMC is being
+               used in raw mode
+

                CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
                Sector to load kernel uImage from when MMC is being
                used in raw mode (for Falcon mode)
                CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
                Sector to load kernel uImage from when MMC is being
                used in raw mode (for Falcon mode)


@@ -3664,6 +3678,10 @@ FIT uImage format:
                parameters from when MMC is being used in raw mode
                (for falcon mode)
 
                parameters from when MMC is being used in raw mode
                (for falcon mode)
 

+               CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+               Partition on the MMC to load U-Boot from when the MMC is being
+               used in fs mode
+

                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary
 
                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary