mx31/mx35/mx51/mx53/mx6: add watchdog

[u-boot] / README

diff --git a/README b/README
index 08c0fccb5e6419e0d9d0cda6f7456a5622a235f0..653ef6aa4a55d57686165e56eeec847dcd40b3f1 100644 (file)
--- a/README
+++ b/README
@@ -1486,6 +1486,21 @@ CBFS (Coreboot Filesystem) support
                Normally display is black on white background; define
                CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 
                Normally display is black on white background; define
                CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 

+               CONFIG_LCD_ALIGNMENT
+
+               Normally the LCD is page-aligned (tyically 4KB). If this is
+               defined then the LCD will be aligned to this value instead.
+               For ARM it is sometimes useful to use MMU_SECTION_SIZE
+               here, since it is cheaper to change data cache settings on
+               a per-section basis.
+
+               CONFIG_CONSOLE_SCROLL_LINES
+
+               When the console need to be scrolled, this is the number of
+               lines to scroll by. It defaults to 1. Increasing this makes
+               the console jump but can help speed up operation when scrolling
+               is slow.
+

                CONFIG_LCD_BMP_RLE8
 
                Support drawing of RLE8-compressed bitmaps on the LCD.
                CONFIG_LCD_BMP_RLE8
 
                Support drawing of RLE8-compressed bitmaps on the LCD.


@@ -1495,7 +1510,6 @@ CBFS (Coreboot Filesystem) support
                Enables an 'i2c edid' command which can read EDID
                information over I2C from an attached LCD display.
 
                Enables an 'i2c edid' command which can read EDID
                information over I2C from an attached LCD display.
 

-

 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
                If this option is set, the environment is checked for
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
                If this option is set, the environment is checked for


@@ -2975,9 +2989,6 @@ Configuration Settings:
                non page size aligned address and this could cause major
                problems.
 
                non page size aligned address and this could cause major
                problems.
 

-- CONFIG_SYS_TFTP_LOADADDR:
-               Default load address for network file downloads
-

 - CONFIG_SYS_LOADS_BAUD_CHANGE:
                Enable temporary baudrate change while serial download
 
 - CONFIG_SYS_LOADS_BAUD_CHANGE:
                Enable temporary baudrate change while serial download
 


@@ -3128,7 +3139,8 @@ Configuration Settings:
 
        The format of the list is:
                type_attribute = [s|d|x|b|i|m]
 
        The format of the list is:
                type_attribute = [s|d|x|b|i|m]

-               attributes = type_attribute
+               access_atribute = [a|r|o|c]
+               attributes = type_attribute[access_atribute]

                entry = variable_name[:attributes]
                list = entry[,list]
 
                entry = variable_name[:attributes]
                list = entry[,list]
 


@@ -3140,6 +3152,12 @@ Configuration Settings:
                i - IP address
                m - MAC address
 
                i - IP address
                m - MAC address
 

+       The access attributes are:
+               a - Any (default)
+               r - Read-only
+               o - Write-once
+               c - Change-default
+

        - CONFIG_ENV_FLAGS_LIST_DEFAULT
                Define this to a list (string) to define the ".flags"
                envirnoment variable in the default or embedded environment.
        - CONFIG_ENV_FLAGS_LIST_DEFAULT
                Define this to a list (string) to define the ".flags"
                envirnoment variable in the default or embedded environment.


@@ -3151,6 +3169,10 @@ Configuration Settings:
                list, simply add an entry for the same variable name to the
                ".flags" variable.
 
                list, simply add an entry for the same variable name to the
                ".flags" variable.
 

+- CONFIG_ENV_ACCESS_IGNORE_FORCE
+       If defined, don't allow the -f switch to env set override variable
+       access flags.
+

 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations: