Added the upmconfig() function for 85xx.

[u-boot] / README

diff --git a/README b/README
index b3423e318e3d33adce18f80302aac2314f04efec..78344f8b57a7e7a4d3c78361bec4f57310c50541 100644 (file)
--- a/README
+++ b/README
@@ -78,7 +78,7 @@ any version you might be interested in. Ofifcial releases are also
 available for FTP download from the ftp://ftp.denx.de/pub/u-boot/
 directory.
 
 available for FTP download from the ftp://ftp.denx.de/pub/u-boot/
 directory.
 

-Pre-build (and tested) images are available from
+Pre-built (and tested) images are available from

 ftp://ftp.denx.de/pub/u-boot/images/
 
 
 ftp://ftp.denx.de/pub/u-boot/images/
 
 


@@ -153,6 +153,8 @@ Directory Hierarchy:
   - at32ap     Files specific to Atmel AVR32 AP CPUs
   - i386       Files specific to i386 CPUs
   - ixp                Files specific to Intel XScale IXP CPUs
   - at32ap     Files specific to Atmel AVR32 AP CPUs
   - i386       Files specific to i386 CPUs
   - ixp                Files specific to Intel XScale IXP CPUs

+  - leon2      Files specific to Gaisler LEON2 SPARC CPU
+  - leon3      Files specific to Gaisler LEON3 SPARC CPU

   - mcf52x2    Files specific to Freescale ColdFire MCF52x2 CPUs
   - mcf5227x   Files specific to Freescale ColdFire MCF5227x CPUs
   - mcf532x    Files specific to Freescale ColdFire MCF5329 CPUs
   - mcf52x2    Files specific to Freescale ColdFire MCF52x2 CPUs
   - mcf5227x   Files specific to Freescale ColdFire MCF5227x CPUs
   - mcf532x    Files specific to Freescale ColdFire MCF5329 CPUs


@@ -186,6 +188,7 @@ Directory Hierarchy:
 - lib_mips     Files generic to MIPS    architecture
 - lib_nios     Files generic to NIOS    architecture
 - lib_ppc      Files generic to PowerPC architecture
 - lib_mips     Files generic to MIPS    architecture
 - lib_nios     Files generic to NIOS    architecture
 - lib_ppc      Files generic to PowerPC architecture

+- lib_sparc    Files generic to SPARC   architecture

 - libfdt       Library files to support flattened device trees
 - net          Networking code
 - post         Power On Self Test
 - libfdt       Library files to support flattened device trees
 - net          Networking code
 - post         Power On Self Test


@@ -372,19 +375,6 @@ The following options need to be configured:
 
                boards with QUICC Engines require OF_QE to set UCC mac addresses
 
 
                boards with QUICC Engines require OF_QE to set UCC mac addresses
 

-               CONFIG_OF_HAS_BD_T
-
-                * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command
-                * CONFIG_OF_FLAT_TREE - The resulting flat device tree
-                    will have a copy of the bd_t.  Space should be
-                    pre-allocated in the dts for the bd_t.
-
-               CONFIG_OF_HAS_UBOOT_ENV
-
-                * CONFIG_OF_LIBFDT - enables the "fdt env" command
-                * CONFIG_OF_FLAT_TREE - The resulting flat device tree
-                    will have a copy of u-boot's environment variables
-

                CONFIG_OF_BOARD_SETUP
 
                Board code has addition modification that it wants to make
                CONFIG_OF_BOARD_SETUP
 
                Board code has addition modification that it wants to make


@@ -633,7 +623,6 @@ The following options need to be configured:
                CONFIG_CMD_SPI          * SPI serial bus support
                CONFIG_CMD_USB          * USB support
                CONFIG_CMD_VFD          * VFD support (TRAB)
                CONFIG_CMD_SPI          * SPI serial bus support
                CONFIG_CMD_USB          * USB support
                CONFIG_CMD_VFD          * VFD support (TRAB)

-               CONFIG_CMD_BSP          * Board SPecific functions

                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_FSL          * Microblaze FSL support
 
                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_FSL          * Microblaze FSL support
 


@@ -682,6 +671,7 @@ The following options need to be configured:
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC

+               CONFIG_RTC_MC13783      - use MC13783 RTC

                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC
                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC


@@ -751,6 +741,9 @@ The following options need to be configured:
                CONFIG_E1000
                Support for Intel 8254x gigabit chips.
 
                CONFIG_E1000
                Support for Intel 8254x gigabit chips.
 

+               CONFIG_E1000_FALLBACK_MAC
+               default MAC for empty eeprom after production.
+

                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom


@@ -968,6 +961,10 @@ The following options need to be configured:
                display); also select one of the supported displays
                by defining one of these:
 
                display); also select one of the supported displays
                by defining one of these:
 

+               CONFIG_ATMEL_LCD:
+
+                       HITACHI TX09D70VM1CCA, 3.5", 240x320.
+

                CONFIG_NEC_NL6448AC33:
 
                        NEC NL6448AC33-18. Active, color, single scan.
                CONFIG_NEC_NL6448AC33:
 
                        NEC NL6448AC33-18. Active, color, single scan.


@@ -1151,6 +1148,20 @@ The following options need to be configured:
                of the "hostname" environment variable is passed as
                option 12 to the DHCP server.
 
                of the "hostname" environment variable is passed as
                option 12 to the DHCP server.
 

+               CONFIG_BOOTP_DHCP_REQUEST_DELAY
+
+               A 32bit value in microseconds for a delay between
+               receiving a "DHCP Offer" and sending the "DHCP Request".
+               This fixes a problem with certain DHCP servers that don't
+               respond 100% of the time to a "DHCP request". E.g. On an
+               AT91RM9200 processor running at 180MHz, this delay needed
+               to be *at least* 15,000 usec before a Windows Server 2003
+               DHCP server would reply 100% of the time. I recommend at
+               least 50,000 usec to be safe. The alternative is to hope
+               that one of the retries will be successful but note that
+               the DHCP timeout and retry process takes a longer than
+               this delay.
+

  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 
  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 


@@ -1407,6 +1418,11 @@ The following options need to be configured:
                Currently supported on some MPC8xxx processors.  For an
                example, see include/configs/mpc8349emds.h.
 
                Currently supported on some MPC8xxx processors.  For an
                example, see include/configs/mpc8349emds.h.
 

+               CONFIG_MXC_SPI
+
+               Enables the driver for the SPI controllers on i.MX and MXC
+               SoCs. Currently only i.MX31 is supported.
+

 - FPGA Support: CONFIG_FPGA
 
                Enables FPGA subsystem.
 - FPGA Support: CONFIG_FPGA
 
                Enables FPGA subsystem.


@@ -1548,6 +1564,10 @@ The following options need to be configured:
                before giving up the operation. If not defined, a
                default value of 5 is used.
 
                before giving up the operation. If not defined, a
                default value of 5 is used.
 

+               CONFIG_ARP_TIMEOUT
+
+               Timeout waiting for an ARP reply in milliseconds.
+

 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 
 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 


@@ -1929,6 +1949,27 @@ Configuration Settings:
                Scratch address used by the alternate memory test
                You only need to set this if address zero isn't writeable
 
                Scratch address used by the alternate memory test
                You only need to set this if address zero isn't writeable
 

+- CFG_MEM_TOP_HIDE (PPC only):
+               If CFG_MEM_TOP_HIDE is defined in the board config header,
+               this specified memory area will get subtracted from the top
+               (end) of ram and won't get "touched" at all by U-Boot. By
+               fixing up gd->ram_size the Linux kernel should gets passed
+               the now "corrected" memory size and won't touch it either.
+               This should work for arch/ppc and arch/powerpc. Only Linux
+               board ports in arch/powerpc with bootwrapper support that
+               recalculate the memory size from the SDRAM controller setup
+               will have to get fixed in Linux additionally.
+
+               This option can be used as a workaround for the 440EPx/GRx
+               CHIP 11 errata where the last 256 bytes in SDRAM shouldn't
+               be touched.
+
+               WARNING: Please make sure that this value is a multiple of
+               the Linux page size (normally 4k). If this is not the case,
+               then the end address of the Linux memory will be located at a
+               non page size aligned address and this could cause major
+               problems.
+

 - CFG_TFTP_LOADADDR:
                Default load address for network file downloads
 
 - CFG_TFTP_LOADADDR:
                Default load address for network file downloads
 


@@ -1969,8 +2010,11 @@ Configuration Settings:
 - CFG_BOOTMAPSZ:
                Maximum size of memory mapped by the startup code of
                the Linux kernel; all data that must be processed by
 - CFG_BOOTMAPSZ:
                Maximum size of memory mapped by the startup code of
                the Linux kernel; all data that must be processed by

-               the Linux kernel (bd_info, boot arguments, eventually
-               initrd image) must be put below this limit.
+               the Linux kernel (bd_info, boot arguments, FDT blob if
+               used) must be put below this limit, unless "bootm_low"
+               enviroment variable is defined and non-zero. In such case
+               all data for the Linux kernel must be between "bootm_low"
+               and "bootm_low" + CFG_BOOTMAPSZ.

 
 - CFG_MAX_FLASH_BANKS:
                Max number of Flash memory banks
 
 - CFG_MAX_FLASH_BANKS:
                Max number of Flash memory banks


@@ -2015,6 +2059,13 @@ Configuration Settings:
                This option also enables the building of the cfi_flash driver
                in the drivers directory
 
                This option also enables the building of the cfi_flash driver
                in the drivers directory
 

+- CFG_FLASH_USE_BUFFER_WRITE
+               Use buffered writes to flash.
+
+- CONFIG_FLASH_SPANSION_S29WS_N
+               s29ws-n MirrorBit flash has non-standard addresses for buffered
+               write commands.
+

 - CFG_FLASH_QUIET_TEST
                If this option is defined, the common CFI flash doesn't
                print it's warning upon not recognized FLASH banks. This
 - CFG_FLASH_QUIET_TEST
                If this option is defined, the common CFI flash doesn't
                print it's warning upon not recognized FLASH banks. This


@@ -2708,6 +2759,20 @@ Some configuration options can be set using Environment Variables:
 
   bootfile     - Name of the image to load with TFTP
 
 
   bootfile     - Name of the image to load with TFTP
 

+  bootm_low    - Memory range available for image processing in the bootm
+                 command can be restricted. This variable is given as
+                 a hexadecimal number and defines lowest address allowed
+                 for use by the bootm command. See also "bootm_size"
+                 environment variable. Address defined by "bootm_low" is
+                 also the base of the initial memory mapping for the Linux
+                 kernel -- see the descripton of CFG_BOOTMAPSZ.
+
+  bootm_size   - Memory range available for image processing in the bootm
+                 command can be restricted. This variable is given as
+                 a hexadecimal number and defines the size of the region
+                 allowed for use by the bootm command. See also "bootm_low"
+                 environment variable.
+

   autoload     - if set to "no" (any string beginning with 'n'),
                  "bootp" will just load perform a lookup of the
                  configuration from the BOOTP server, but not try to
   autoload     - if set to "no" (any string beginning with 'n'),
                  "bootp" will just load perform a lookup of the
                  configuration from the BOOTP server, but not try to