+#define MUX_APLL_SEL_MASK (1 << 0)
+#define MUX_MPLL_SEL_MASK (1 << 8)
+#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8)
+#define MUX_CPLL_SEL_MASK (1 << 8)
+#define MUX_EPLL_SEL_MASK (1 << 12)
+#define MUX_VPLL_SEL_MASK (1 << 16)
+#define MUX_GPLL_SEL_MASK (1 << 28)
+#define MUX_BPLL_SEL_MASK (1 << 0)
+#define MUX_HPM_SEL_MASK (1 << 20)
+#define HPM_SEL_SCLK_MPLL (1 << 21)
+#define PLL_LOCKED (1 << 29)
+#define APLL_CON0_LOCKED (1 << 29)
+#define MPLL_CON0_LOCKED (1 << 29)
+#define BPLL_CON0_LOCKED (1 << 29)
+#define CPLL_CON0_LOCKED (1 << 29)
+#define EPLL_CON0_LOCKED (1 << 29)
+#define GPLL_CON0_LOCKED (1 << 29)
+#define VPLL_CON0_LOCKED (1 << 29)
+#define CLK_REG_DISABLE 0x0
+#define TOP2_VAL 0x0110000
+
+/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
+#define SPI0_ISP_SEL 6
+#define SPI1_ISP_SEL 6
+#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \
+ | (SPI0_ISP_SEL << 0)
+
+/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
+#define SPI0_ISP_RATIO 0xf
+#define SPI1_ISP_RATIO 0xf
+#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \
+ | (SPI0_ISP_RATIO << 0)
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO_MASK 0xf
+#define MMC2_RATIO_VAL 0x3
+#define MMC2_RATIO_OFFSET 0
+
+#define MMC2_PRE_RATIO_MASK 0xff
+#define MMC2_PRE_RATIO_VAL 0x9
+#define MMC2_PRE_RATIO_OFFSET 8
+
+#define MMC3_RATIO_MASK 0xf
+#define MMC3_RATIO_VAL 0x1
+#define MMC3_RATIO_OFFSET 16
+
+#define MMC3_PRE_RATIO_MASK 0xff
+#define MMC3_PRE_RATIO_VAL 0x0
+#define MMC3_PRE_RATIO_OFFSET 24
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL 0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL 0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL 0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL 0x10
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL 0x1
+
+/* CLK_SRC_KFC */
+#define SRC_KFC_HPM_SEL (1 << 15)
+
+/* CLK_SRC_KFC */
+#define CLK_SRC_KFC_VAL 0x00008001
+
+/* CLK_DIV_KFC */
+#define CLK_DIV_KFC_VAL 0x03300110
+
+/* CLK_DIV2_RATIO */
+#define CLK_DIV2_RATIO 0x10111150
+
+/* CLK_DIV4_RATIO */
+#define CLK_DIV4_RATIO 0x00000003
+
+/* CLK_DIV_G2D */
+#define CLK_DIV_G2D 0x00000010
+
+/*
+ * DIV_DISP1_0
+ * For DP, divisor should be 2
+ */
+#define CLK_DIV_DISP1_0_FIMD1 (2 << 0)
+
+/* CLK_GATE_IP_DISP1 */
+#define CLK_GATE_DP1_ALLOW (1 << 4)
+
+/* AUDIO CLK SEL */
+#define AUDIO0_SEL_EPLL (0x6 << 28)
+#define AUDIO0_RATIO 0x5
+#define PCM0_RATIO 0x3
+#define DIV_MAU_VAL (PCM0_RATIO << 24 | AUDIO0_RATIO << 20)
+
+/* CLK_SRC_CDREX */
+#define MUX_MCLK_CDR_MSPLL (1 << 4)
+#define MUX_BPLL_SEL_FOUTBPLL (1 << 0)
+#define BPLL_SEL_MASK 0x7
+#define FOUTBPLL 2
+
+#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
+#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
+
+#define PHY_CON0_RESET_VAL 0x17020a40
+#define P0_CMD_EN (1 << 14)
+#define BYTE_RDLVL_EN (1 << 13)
+#define CTRL_SHGATE (1 << 8)
+
+#define PHY_CON1_RESET_VAL 0x09210100
+#define RDLVL_PASS_ADJ_VAL 0x6
+#define RDLVL_PASS_ADJ_OFFSET 16
+#define CTRL_GATEDURADJ_MASK (0xf << 20)
+#define READ_LEVELLING_DDR3 0x0100
+
+#define PHY_CON2_RESET_VAL 0x00010004
+#define INIT_DESKEW_EN (1 << 6)
+#define DLL_DESKEW_EN (1 << 12)
+#define RDLVL_GATE_EN (1 << 24)
+#define RDLVL_EN (1 << 25)
+#define RDLVL_INCR_ADJ (0x1 << 16)
+
+/* DREX_PAUSE */
+#define DREX_PAUSE_EN (1 << 0)
+
+#define BYPASS_EN (1 << 22)
+
+/* MEMMORY VAL */
+#define PHY_CON0_VAL 0x17021A00
+
+#define PHY_CON12_RESET_VAL 0x10100070
+#define PHY_CON12_VAL 0x10107F50
+#define CTRL_START (1 << 6)
+#define CTRL_DLL_ON (1 << 5)
+#define CTRL_LOCK_COARSE_OFFSET 10
+#define CTRL_LOCK_COARSE_MASK (0x7F << CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_LOCK_COARSE(x) (((x) & CTRL_LOCK_COARSE_MASK) >> \
+ CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_FORCE_MASK (0x7F << 8)
+#define CTRL_FINE_LOCKED 0x7
+
+#define CTRL_OFFSETD_RESET_VAL 0x8
+#define CTRL_OFFSETD_VAL 0x7F
+
+#define CTRL_OFFSETR0 0x7F
+#define CTRL_OFFSETR1 0x7F
+#define CTRL_OFFSETR2 0x7F
+#define CTRL_OFFSETR3 0x7F
+#define PHY_CON4_VAL (CTRL_OFFSETR0 << 0 | \
+ CTRL_OFFSETR1 << 8 | \
+ CTRL_OFFSETR2 << 16 | \
+ CTRL_OFFSETR3 << 24)
+#define PHY_CON4_RESET_VAL 0x08080808
+
+#define CTRL_OFFSETW0 0x7F
+#define CTRL_OFFSETW1 0x7F
+#define CTRL_OFFSETW2 0x7F
+#define CTRL_OFFSETW3 0x7F
+#define PHY_CON6_VAL (CTRL_OFFSETW0 << 0 | \
+ CTRL_OFFSETW1 << 8 | \
+ CTRL_OFFSETW2 << 16 | \
+ CTRL_OFFSETW3 << 24)
+#define PHY_CON6_RESET_VAL 0x08080808
+
+#define PHY_CON14_RESET_VAL 0x001F0000
+#define CTRL_PULLD_DQS 0xF
+#define CTRL_PULLD_DQS_OFFSET 0
+
+/* ZQ Configurations */
+#define PHY_CON16_RESET_VAL 0x08000304
+
+#define ZQ_CLK_EN (1 << 27)
+#define ZQ_CLK_DIV_EN (1 << 18)
+#define ZQ_MANUAL_STR (1 << 1)
+#define ZQ_DONE (1 << 0)
+#define ZQ_MODE_DDS_OFFSET 24
+
+#define CTRL_RDLVL_GATE_ENABLE 1
+#define CTRL_RDLVL_GATE_DISABLE 0
+#define CTRL_RDLVL_DATA_ENABLE 2
+
+/* Direct Command */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_PALL 0x01000000
+#define DIRECT_CMD_ZQINIT 0x0a000000
+#define DIRECT_CMD_CHANNEL_SHIFT 28
+#define DIRECT_CMD_CHIP_SHIFT 20
+#define DIRECT_CMD_BANK_SHIFT 16
+#define DIRECT_CMD_REFA (5 << 24)
+#define DIRECT_CMD_MRS1 0x71C00
+#define DIRECT_CMD_MRS2 0x10BFC
+#define DIRECT_CMD_MRS3 0x0050C
+#define DIRECT_CMD_MRS4 0x00868
+#define DIRECT_CMD_MRS5 0x00C04
+
+/* Drive Strength */
+#define IMPEDANCE_48_OHM 4
+#define IMPEDANCE_40_OHM 5
+#define IMPEDANCE_34_OHM 6
+#define IMPEDANCE_30_OHM 7
+#define PHY_CON39_VAL_48_OHM 0x09240924
+#define PHY_CON39_VAL_40_OHM 0x0B6D0B6D
+#define PHY_CON39_VAL_34_OHM 0x0DB60DB6
+#define PHY_CON39_VAL_30_OHM 0x0FFF0FFF
+
+#define CTRL_BSTLEN_OFFSET 8
+#define CTRL_RDLAT_OFFSET 0
+
+#define CMD_DEFAULT_LPDDR3 0xF
+#define CMD_DEFUALT_OFFSET 0
+#define T_WRDATA_EN 0x7
+#define T_WRDATA_EN_DDR3 0x8
+#define T_WRDATA_EN_OFFSET 16
+#define T_WRDATA_EN_MASK 0x1f
+
+#define PHY_CON31_VAL 0x0C183060
+#define PHY_CON32_VAL 0x60C18306
+#define PHY_CON33_VAL 0x00000030
+
+#define PHY_CON31_RESET_VAL 0x0
+#define PHY_CON32_RESET_VAL 0x0
+#define PHY_CON33_RESET_VAL 0x0
+
+#define SL_DLL_DYN_CON_EN (1 << 1)
+#define FP_RESYNC (1 << 3)
+#define CTRL_START (1 << 6)
+
+#define DMC_AREF_EN (1 << 5)
+#define DMC_CONCONTROL_EMPTY (1 << 8)
+#define DFI_INIT_START (1 << 28)
+
+#define DMC_MEMCONTROL_VAL 0x00312700
+#define CLK_STOP_EN (1 << 0)
+#define DPWRDN_EN (1 << 1)
+#define DSREF_EN (1 << 5)
+
+#define MEMBASECONFIG_CHIP_MASK_VAL 0x7E0
+#define MEMBASECONFIG_CHIP_MASK_OFFSET 0
+#define MEMBASECONFIG0_CHIP_BASE_VAL 0x20
+#define MEMBASECONFIG1_CHIP_BASE_VAL 0x40
+#define CHIP_BASE_OFFSET 16
+
+#define MEMCONFIG_VAL 0x1323
+#define PRECHCONFIG_DEFAULT_VAL 0xFF000000
+#define PWRDNCONFIG_DEFAULT_VAL 0xFFFF00FF
+
+#define TIMINGAREF_VAL 0x5d
+#define TIMINGROW_VAL 0x345A8692
+#define TIMINGDATA_VAL 0x3630065C
+#define TIMINGPOWER_VAL 0x50380336
+#define DFI_INIT_COMPLETE (1 << 3)
+
+#define BRBRSVCONTROL_VAL 0x00000033
+#define BRBRSVCONFIG_VAL 0x88778877
+
+/* Clock Gating Control (CGCONTROL) register */
+#define MEMIF_CG_EN (1 << 3) /* Memory interface clock gating */
+#define SCG_CG_EN (1 << 2) /* Scheduler clock gating */
+#define BUSIF_WR_CG_EN (1 << 1) /* Bus interface write channel clock gating */
+#define BUSIF_RD_CG_EN (1 << 0) /* Bus interface read channel clock gating */
+#define DMC_INTERNAL_CG (MEMIF_CG_EN | SCG_CG_EN | \
+ BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
+
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL 0x0
+#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
+#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */
+#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */
+#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */
+
+/* Driver strength for CK, CKE, CS & CA */
+#define IMP_OUTPUT_DRV_40_OHM 0x5
+#define IMP_OUTPUT_DRV_30_OHM 0x7
+#define DA_3_DS_OFFSET 25
+#define DA_2_DS_OFFSET 22
+#define DA_1_DS_OFFSET 19
+#define DA_0_DS_OFFSET 16
+#define CA_CK_DRVR_DS_OFFSET 9
+#define CA_CKE_DRVR_DS_OFFSET 6
+#define CA_CS_DRVR_DS_OFFSET 3
+#define CA_ADR_DRVR_DS_OFFSET 0
+
+#define PHY_CON42_CTRL_BSTLEN_SHIFT 8
+#define PHY_CON42_CTRL_RDLAT_SHIFT 0
+
+/*
+ * Definitions that differ with SoC's.
+ * Below is the part defining macros for Exynos5250.
+ * Else part introduces macros for Exynos5420.
+ */
+#ifndef CONFIG_EXYNOS5420
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL (0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL (0x00203800)
+
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL (NOT_AVAILABLE)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL (0x00203800)
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL 0x00000000
+#define EPLL_CON2_VAL 0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL 0x00000000
+#define VPLL_CON2_VAL 0x00000080
+
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL NOT_AVAILABLE
+#define RPLL_CON2_VAL NOT_AVAILABLE
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL 0x00203800
+
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL NOT_AVAILABLE
+
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL NOT_AVAILABLE
+
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL NOT_AVAILABLE
+
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL NOT_AVAILABLE
+#define CLK_DIV_ISP0_VAL 0x31
+#define CLK_DIV_ISP1_VAL 0x0
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL 0x66666
+#define CLK_DIV_FSYS0_VAL 0x0BB00000
+#define CLK_DIV_FSYS1_VAL NOT_AVAILABLE
+#define CLK_DIV_FSYS2_VAL NOT_AVAILABLE
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL 0
+#define MUX_CPU_SEL 0
+#define MUX_APLL_SEL 1
+
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
+ | (MUX_CPU_SEL << 16) \
+ | (MUX_APLL_SEL))
+