+#ifdef CONFIG_ARM_ERRATA_845369
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 22 @ set bit #22
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+ mov r5, lr @ Store my Caller
+ mrc p15, 0, r1, c0, c0, 0 @ r1 has Read Main ID Register (MIDR)
+ mov r3, r1, lsr #20 @ get variant field
+ and r3, r3, #0xf @ r3 has CPU variant
+ and r4, r1, #0xf @ r4 has CPU revision
+ mov r2, r3, lsl #4 @ shift variant field for combined value
+ orr r2, r4, r2 @ r2 has combined CPU variant + revision
+
+#ifdef CONFIG_ARM_ERRATA_798870
+ cmp r2, #0x30 @ Applies to lower than R3p0
+ bge skip_errata_798870 @ skip if not affected rev
+ cmp r2, #0x20 @ Applies to including and above R2p0
+ blt skip_errata_798870 @ skip if not affected rev
+
+ mrc p15, 1, r0, c15, c0, 0 @ read l2 aux ctrl reg
+ orr r0, r0, #1 << 7 @ Enable hazard-detect timeout
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_l2aux_ctrl
+ isb @ Recommended ISB after l2actlr update
+ pop {r1-r5} @ Restore the cpu info - fall through
+skip_errata_798870:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_801819
+ cmp r2, #0x24 @ Applies to lt including R2p4
+ bgt skip_errata_801819 @ skip if not affected rev
+ cmp r2, #0x20 @ Applies to including and above R2p0
+ blt skip_errata_801819 @ skip if not affected rev
+ mrc p15, 0, r0, c0, c0, 6 @ pick up REVIDR reg
+ and r0, r0, #1 << 3 @ check REVIDR[3]
+ cmp r0, #1 << 3
+ beq skip_errata_801819 @ skip erratum if REVIDR[3] is set
+
+ mrc p15, 0, r0, c1, c0, 1 @ read auxilary control register
+ orr r0, r0, #3 << 27 @ Disables streaming. All write-allocate
+ @ lines allocate in the L1 or L2 cache.
+ orr r0, r0, #3 << 25 @ Disables streaming. All write-allocate
+ @ lines allocate in the L1 cache.
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+skip_errata_801819:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_454179
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+
+ cmp r2, #0x21 @ Only on < r2p1
+ orrlt r0, r0, #(0x3 << 6) @ Set DBSM(BIT7) and IBE(BIT6) bits
+
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_430973
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+
+ cmp r2, #0x21 @ Only on < r2p1
+ orrlt r0, r0, #(0x1 << 6) @ Set IBE bit
+
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_621766
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+
+ cmp r2, #0x21 @ Only on < r2p1
+ orrlt r0, r0, #(0x1 << 5) @ Set L1NEON bit
+
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_725233
+ mrc p15, 1, r0, c9, c0, 2 @ Read L2ACR
+
+ cmp r2, #0x21 @ Only on < r2p1 (Cortex A8)
+ orrlt r0, r0, #(0x1 << 27) @ L2 PLD data forwarding disable
+
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_l2aux_ctrl
+ pop {r1-r5} @ Restore the cpu info - fall through
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_852421
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 24 @ set bit #24
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_852423
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 12 @ set bit #12
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+ mov pc, r5 @ back to my caller