Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board

[u-boot] / board / dbau1x00 / README

diff --git a/board/dbau1x00/README b/board/dbau1x00/README
index 024fbbe3ec7623e31ddd3fb4722021ed50fdaada..b37ff3616b28b7ab65deff3090a21d16d371c046 100644 (file)
--- a/board/dbau1x00/README
+++ b/board/dbau1x00/README
@@ -1,30 +1,40 @@
-By Thomas.Lange@corelatus.se 2003-10-06
+By Thomas.Lange@corelatus.se 2004-Oct-05

 ----------------------------------------
 ----------------------------------------

-DbAu1000 is a development board from AMD containing
-an Alchemy AU1000 with mips32 core.
+DbAu1xx0 are development boards from AMD containing
+an Alchemy AU1xx0 series cpu with mips32 core.
+Existing cpu:s are Au1000, Au1100, Au1500 and Au1550

 
 Limitations & comments
 ----------------------
 
 Limitations & comments
 ----------------------

-I assume that you set board to BIG endian!
-Little endian not tested, most probably broken.
+Support was originally big endian only.
+I have not tested, but several u-boot users report working
+configurations in little endian mode.

 
 I named the board dbau1x00, to allow
 support for all three development boards
 
 I named the board dbau1x00, to allow
 support for all three development boards

-some day ( dbau1000, dbau1100 and dbau1500 ).
+( dbau1000, dbau1100 and dbau1500 ).
+Now there is a new board called dbau1550 also, which
+should be supported RSN.

 
 

-I only have a dbau1000, so all testing is limited
-to this board!
+I only have a dbau1000, so my testing is limited
+to this board.

 
 The board has two different flash banks, that can
 be selected via dip switch. This makes it possible
 to test new bootloaders without thrashing the YAMON
 
 The board has two different flash banks, that can
 be selected via dip switch. This makes it possible
 to test new bootloaders without thrashing the YAMON

-boot loader deliviered with board.
+boot loader delivered with board.
+
+NOTE! When you switch between the two boot flashes, the
+base addresses will be swapped.
+Have this in mind when you compile u-boot. TEXT_BASE has
+to match the address where u-boot is located when you
+actually launch.

 
 Ethernet only supported for mac0.
 
 
 Ethernet only supported for mac0.
 

-Pcmcia only supported for slot 0, only 3.3V.
+PCMCIA only supported for slot 0, only 3.3V.

 
 

-Pcmcia IDE tested with Sandisk Compact Flash and
+PCMCIA IDE tested with Sandisk Compact Flash and

 IBM microdrive.
 
 ###################################
 IBM microdrive.
 
 ###################################


@@ -32,7 +42,7 @@ IBM microdrive.
 ###################################
 If you partition a disk on another system (e.g. laptop),
 all bytes will be swapped on 16bit level when using
 ###################################
 If you partition a disk on another system (e.g. laptop),
 all bytes will be swapped on 16bit level when using

-PCMCIA!!!!
+PCMCIA and running cpu in big endian mode!!!!

 
 This is probably due to an error in Au1000 chip.
 
 
 This is probably due to an error in Au1000 chip.