board: arm: Add support for Broadcom BCM7445

[u-boot] / cmd / Kconfig

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 1a1ca60237dfe672f5a89ce00cf601a096a1a647..aec209006dbfb57c204d0caeb1ca87f0bcaf8316 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -137,8 +137,6 @@ config AUTOBOOT_STOP_STR_SHA256
 
 endmenu
 
 
 endmenu
 

-source "cmd/fastboot/Kconfig"
-

 config BUILD_BIN2C
        bool
 
 config BUILD_BIN2C
        bool
 


@@ -650,6 +648,18 @@ config CMD_DM
          can be useful to see the state of driver model for debugging or
          interest.
 
          can be useful to see the state of driver model for debugging or
          interest.
 

+config CMD_FASTBOOT
+       bool "fastboot - Android fastboot support"
+       depends on FASTBOOT
+       help
+         This enables the command "fastboot" which enables the Android
+         fastboot mode for the platform. Fastboot is a protocol for
+         downloading images, flashing and device control used on
+         Android devices. Fastboot requires either the network stack
+         enabled or support for acting as a USB device.
+
+         See doc/README.android-fastboot for more information.
+

 config CMD_FDC
        bool "fdcboot - Boot from floppy device"
        help
 config CMD_FDC
        bool "fdcboot - Boot from floppy device"
        help


@@ -697,6 +707,13 @@ config CMD_FPGA_LOADP
          Supports loading an FPGA device from a bitstream buffer containing
          a partial bitstream.
 
          Supports loading an FPGA device from a bitstream buffer containing
          a partial bitstream.
 

+config CMD_FPGA_LOAD_SECURE
+       bool "fpga loads - loads secure bitstreams (Xilinx only)"
+       depends on CMD_FPGA
+       help
+         Enables the fpga loads command which is used to load secure
+         (authenticated or encrypted or both) bitstreams on to FPGA.
+

 config CMD_FPGAD
        bool "fpgad - dump FPGA registers"
        help
 config CMD_FPGAD
        bool "fpgad - dump FPGA registers"
        help


@@ -823,6 +840,14 @@ config CMD_MMC_RPMB
          Enable the commands for reading, writing and programming the
          key for the Replay Protection Memory Block partition in eMMC.
 
          Enable the commands for reading, writing and programming the
          key for the Replay Protection Memory Block partition in eMMC.
 

+config CMD_MMC_SWRITE
+       bool "mmc swrite"
+       depends on CMD_MMC && MMC_WRITE
+       select IMAGE_SPARSE
+       help
+         Enable support for the "mmc swrite" command to write Android sparse
+         images to eMMC.
+

 config CMD_NAND
        bool "nand"
        default y if NAND_SUNXI
 config CMD_NAND
        bool "nand"
        default y if NAND_SUNXI


@@ -1096,6 +1121,16 @@ config BOOTP_HOSTNAME
        help
          The name may or may not be qualified with the local domain name.
 
        help
          The name may or may not be qualified with the local domain name.
 

+config BOOTP_PREFER_SERVERIP
+       bool "serverip variable takes precedent over DHCP server IP."
+       depends on CMD_BOOTP
+       help
+         By default a BOOTP/DHCP reply will overwrite the 'serverip' variable.
+
+         With this option enabled, the 'serverip' variable in the environment
+         takes precedence over DHCP server IP and will only be set by the DHCP
+         server if not already set in the environment.
+

 config BOOTP_SUBNETMASK
        bool "Request & store 'netmask' from BOOTP/DHCP server"
        default y
 config BOOTP_SUBNETMASK
        bool "Request & store 'netmask' from BOOTP/DHCP server"
        default y


@@ -1194,6 +1229,7 @@ config CMD_DNS
 
 config CMD_LINK_LOCAL
        bool "linklocal"
 
 config CMD_LINK_LOCAL
        bool "linklocal"

+       select LIB_RAND

        help
          Acquire a network IP address using the link-local protocol
 
        help
          Acquire a network IP address using the link-local protocol
 


@@ -1213,6 +1249,11 @@ config CMD_PXE
        help
          Boot image via network using PXE protocol
 
        help
          Boot image via network using PXE protocol
 

+config CMD_WOL
+       bool "wol"
+       help
+         Wait for wake-on-lan Magic Packet
+

 endif
 
 menu "Misc commands"
 endif
 
 menu "Misc commands"


@@ -1728,6 +1769,22 @@ config CMD_TRACE
          for analsys (e.g. using bootchart). See doc/README.trace for full
          details.
 
          for analsys (e.g. using bootchart). See doc/README.trace for full
          details.
 

+config CMD_AVB
+       bool "avb - Android Verified Boot 2.0 operations"
+       depends on LIBAVB
+       default n
+       help
+         Enables a "avb" command to perform verification of partitions using
+         Android Verified Boot 2.0 functionality. It includes such subcommands:
+           avb init - initialize avb2 subsystem
+           avb read_rb - read rollback index
+           avb write_rb - write rollback index
+           avb is_unlocked - check device lock state
+           avb get_uuid - read and print uuid of a partition
+           avb read_part - read data from partition
+           avb read_part_hex - read data from partition and output to stdout
+           avb write_part - write data to partition
+           avb verify - run full verification chain

 endmenu
 
 config CMD_UBI
 endmenu
 
 config CMD_UBI