+config CMD_SOUND
+ bool "sound"
+ depends on SOUND
+ help
+ This provides basic access to the U-Boot's sound support. The main
+ feature is to play a beep.
+
+ sound init - set up sound system
+ sound play - play a sound
+
+endmenu
+
+menu "Boot timing"
+
+config BOOTSTAGE
+ bool "Boot timing and reporting"
+ help
+ Enable recording of boot time while booting. To use it, insert
+ calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
+ bootstage.h. Only a single entry is recorded for each ID. You can
+ give the entry a name with bootstage_mark_name(). You can also
+ record elapsed time in a particular stage using bootstage_start()
+ before starting and bootstage_accum() when finished. Bootstage will
+ add up all the accumated time and report it.
+
+ Normally, IDs are defined in bootstage.h but a small number of
+ additional 'user' IDs can be used but passing BOOTSTAGE_ID_ALLOC
+ as the ID.
+
+ Calls to show_boot_progress() wil also result in log entries but
+ these will not have names.
+
+config BOOTSTAGE_REPORT
+ bool "Display a detailed boot timing report before booting the OS"
+ depends on BOOTSTAGE
+ help
+ Enable output of a boot time report just before the OS is booted.
+ This shows how long it took U-Boot to go through each stage of the
+ boot process. The report looks something like this:
+
+ Timer summary in microseconds:
+ Mark Elapsed Stage
+ 0 0 reset
+ 3,575,678 3,575,678 board_init_f start
+ 3,575,695 17 arch_cpu_init A9
+ 3,575,777 82 arch_cpu_init done
+ 3,659,598 83,821 board_init_r start
+ 3,910,375 250,777 main_loop
+ 29,916,167 26,005,792 bootm_start
+ 30,361,327 445,160 start_kernel
+
+config BOOTSTAGE_USER_COUNT
+ hex "Number of boot ID numbers available for user use"
+ default 20
+ help
+ This is the number of available user bootstage records.
+ Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
+ a new ID will be allocated from this stash. If you exceed
+ the limit, recording will stop.
+
+config CMD_BOOTSTAGE
+ bool "Enable the 'bootstage' command"
+ depends on BOOTSTAGE
+ help
+ Add a 'bootstage' command which supports printing a report
+ and un/stashing of bootstage data.
+
+config BOOTSTAGE_FDT
+ bool "Store boot timing information in the OS device tree"
+ depends on BOOTSTAGE
+ help
+ Stash the bootstage information in the FDT. A root 'bootstage'
+ node is created with each bootstage id as a child. Each child
+ has a 'name' property and either 'mark' containing the
+ mark time in microsecond, or 'accum' containing the
+ accumulated time for that bootstage id in microseconds.
+ For example:
+
+ bootstage {
+ 154 {
+ name = "board_init_f";
+ mark = <3575678>;
+ };
+ 170 {
+ name = "lcd";
+ accum = <33482>;
+ };
+ };
+
+ Code in the Linux kernel can find this in /proc/devicetree.
+
+config BOOTSTAGE_STASH
+ bool "Stash the boot timing information in memory before booting OS"
+ depends on BOOTSTAGE
+ help
+ Some OSes do not support device tree. Bootstage can instead write
+ the boot timing information in a binary format at a given address.
+ This happens through a call to bootstage_stash(), typically in
+ the CPU's cleanup_before_linux() function. You can use the
+ 'bootstage stash' and 'bootstage unstash' commands to do this on
+ the command line.
+
+config BOOTSTAGE_STASH_ADDR
+ hex "Address to stash boot timing information"
+ default 0
+ help
+ Provide an address which will not be overwritten by the OS when it
+ starts, so that it can read this information when ready.
+
+config BOOTSTAGE_STASH_SIZE
+ hex "Size of boot timing stash region"
+ default 4096
+ help
+ This should be large enough to hold the bootstage stash. A value of
+ 4096 (4KiB) is normally plenty.
+
+endmenu
+
+menu "Power commands"
+config CMD_PMIC
+ bool "Enable Driver Model PMIC command"
+ depends on DM_PMIC
+ help
+ This is the pmic command, based on a driver model pmic's API.
+ Command features are unchanged:
+ - list - list pmic devices
+ - pmic dev <id> - show or [set] operating pmic device (NEW)
+ - pmic dump - dump registers
+ - pmic read address - read byte of register at address
+ - pmic write address - write byte to register at address
+ The only one change for this command is 'dev' subcommand.
+
+config CMD_REGULATOR
+ bool "Enable Driver Model REGULATOR command"
+ depends on DM_REGULATOR
+ help
+ This command is based on driver model regulator's API.
+ User interface features:
+ - list - list regulator devices
+ - regulator dev <id> - show or [set] operating regulator device
+ - regulator info - print constraints info
+ - regulator status - print operating status
+ - regulator value <val] <-f> - print/[set] voltage value [uV]
+ - regulator current <val> - print/[set] current value [uA]
+ - regulator mode <id> - print/[set] operating mode id
+ - regulator enable - enable the regulator output
+ - regulator disable - disable the regulator output
+
+ The '-f' (force) option can be used for set the value which exceeds
+ the limits, which are found in device-tree and are kept in regulator's
+ uclass platdata structure.
+
+endmenu
+
+menu "Security commands"
+config CMD_TPM
+ bool "Enable the 'tpm' command"
+ depends on TPM
+ help
+ This provides a means to talk to a TPM from the command line. A wide
+ range of commands if provided - see 'tpm help' for details. The
+ command requires a suitable TPM on your board and the correct driver
+ must be enabled.
+
+config CMD_TPM_TEST
+ bool "Enable the 'tpm test' command"
+ depends on CMD_TPM
+ help
+ This provides a a series of tests to confirm that the TPM is working
+ correctly. The tests cover initialisation, non-volatile RAM, extend,
+ global lock and checking that timing is within expectations. The
+ tests pass correctly on Infineon TPMs but may need to be adjusted
+ for other devices.
+
projects / u-boot / blobdiff