cmd/bdinfo: correct comment in board_detail

[u-boot] / doc / README.drivers.eth

diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth
index 42af442ea17dfe31f40848e93f50eede8b154740..1a9a23b51b92443e076da9468831ed3352f2b0cf 100644 (file)
--- a/doc/README.drivers.eth
+++ b/doc/README.drivers.eth
@@ -1,3 +1,9 @@
+!!! WARNING !!!
+
+This guide describes to the old way of doing things. No new Ethernet drivers
+should be implemented this way. All new drivers should be written against the
+U-Boot core driver model. See doc/driver-model/README.txt
+

 -----------------------
  Ethernet Driver Guide
 -----------------------
 -----------------------
  Ethernet Driver Guide
 -----------------------


@@ -135,11 +141,11 @@ function can be called multiple times in a row.
 
 The recv function should process packets as long as the hardware has them
 readily available before returning.  i.e. you should drain the hardware fifo.
 
 The recv function should process packets as long as the hardware has them
 readily available before returning.  i.e. you should drain the hardware fifo.

-For each packet you receive, you should call the NetReceive() function on it
+For each packet you receive, you should call the net_process_received_packet() function on it

 along with the packet length.  The common code sets up packet buffers for you
 along with the packet length.  The common code sets up packet buffers for you

-already in the .bss (NetRxPackets), so there should be no need to allocate your
-own.  This doesn't mean you must use the NetRxPackets array however; you're
-free to call the NetReceive() function with any buffer you wish.  So the pseudo
+already in the .bss (net_rx_packets), so there should be no need to allocate your
+own.  This doesn't mean you must use the net_rx_packets array however; you're
+free to call the net_process_received_packet() function with any buffer you wish.  So the pseudo

 code here would look something like:
 int ape_recv(struct eth_device *dev)
 {
 code here would look something like:
 int ape_recv(struct eth_device *dev)
 {


@@ -147,9 +153,9 @@ int ape_recv(struct eth_device *dev)
        ...
        while (packets_are_available()) {
                ...
        ...
        while (packets_are_available()) {
                ...

-               length = ape_get_packet(&NetRxPackets[i]);
+               length = ape_get_packet(&net_rx_packets[i]);

                ...
                ...

-               NetReceive(&NetRxPackets[i], length);
+               net_process_received_packet(&net_rx_packets[i], length);

                ...
                if (++i >= PKTBUFSRX)
                        i = 0;
                ...
                if (++i >= PKTBUFSRX)
                        i = 0;