+1.3 Since different board/chip rev. combinations have AC timing issues,
+ u-boot forces RGMII-ID (RGMII with Internal Delay) mode on by default
+ by the patch (mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers).
+
+ When the rev2.x silicon mount on these boards, and if you are using
+ u-boot version after this patch, to make the ethernet interfaces usable,
+ and to enable RGMII-ID on your board, you have to setup the jumpers
+ correctly.
+
+ * MPC8360E-MDS-PB PROTO
+ nothing to do
+ * MPC8360E-MDS-PB PILOT
+ JP9 and JP8 should be ON
+ * MPC8360EA-MDS-PB PROTO
+ JP2 and JP3 should be ON