musb: Program extvbus for OMAP3EVM Rev >= E

[u-boot] / doc / README.mpc85xxads

diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index 146cff55216803b634cb4f7bee2bda970227b9fe..046f981cf0d299695e1d7835e64a3662fdeff44b 100644 (file)
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -7,7 +7,7 @@ Updated 13-July-2004 Jon Loeliger
 0. Toolchain
 
     The Binutils in current ELDK toolchain will not support MPC85xx
 0. Toolchain
 
     The Binutils in current ELDK toolchain will not support MPC85xx

-    chip.  You need use the newest binutils-2.14.tar.bz2 from
+    chip.  You need to use binutils-2.14.tar.bz2 (or newer) from

     http://ftp.gnu.org/gnu/binutils.
 
     The 8540/8560 ADS code base is known to compile using:
     http://ftp.gnu.org/gnu/binutils.
 
     The 8540/8560 ADS code base is known to compile using:


@@ -100,6 +100,9 @@ Updated 13-July-2004 Jon Loeliger
        SW7[1:4]  =    0101 =  5    => 5 x 66    = 330  CCB Sysclk
        SW7[5:6]  =      01         => 5:2 x 330 = 825  Core clock
 
        SW7[1:4]  =    0101 =  5    => 5 x 66    = 330  CCB Sysclk
        SW7[5:6]  =      01         => 5:2 x 330 = 825  Core clock
 

+    In order to use PCI-X (only in the first PCI slot.  The one with
+    the RIO connector), you need to set SW1[4] (config) to 1 (off).
+    Also, configure the board to run PCI at 66 MHz.

 
 2. MEMORY MAP TO WORK WITH LINUX KERNEL
 
 
 2. MEMORY MAP TO WORK WITH LINUX KERNEL
 


@@ -121,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger
     kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
     default configuration files as your starting points to configure the
     kernel:
     kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
     default configuration files as your starting points to configure the
     kernel:

-       arch/ppc/configs/mpc8540_ads_defconfig
-       arch/ppc/configs/mpc8560_ads_defconfig
+       arch/powerpc/configs/mpc8540_ads_defconfig
+       arch/powerpc/configs/mpc8560_ads_defconfig

 
 3. DEFINITIONS AND COMPILATION
 
 
 3. DEFINITIONS AND COMPILATION
 


@@ -130,11 +133,10 @@ Updated 13-July-2004 Jon Loeliger
        include/configs/MPC8540ADS.h
        include/configs/MPC8560ADS.h
 
        include/configs/MPC8540ADS.h
        include/configs/MPC8560ADS.h
 

-    CONFIG_BOOKE           BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+    CONFIG_BOOKE           BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)

     CONFIG_E500                    BOOKE e500 family(Motorola)
     CONFIG_MPC85xx         MPC8540,MPC8560 and their derivatives
     CONFIG_MPC8540         MPC8540 specific
     CONFIG_E500                    BOOKE e500 family(Motorola)
     CONFIG_MPC85xx         MPC8540,MPC8560 and their derivatives
     CONFIG_MPC8540         MPC8540 specific

-    CONFIG_MPC8560         MPC8560 specific

     CONFIG_MPC8540ADS      MPC8540ADS board specific
     CONFIG_MPC8560ADS      MPC8560ADS board specific
     CONFIG_TSEC_ENET       Use on-chip 10/100/1000 ethernet for networking
     CONFIG_MPC8540ADS      MPC8540ADS board specific
     CONFIG_MPC8560ADS      MPC8560ADS board specific
     CONFIG_TSEC_ENET       Use on-chip 10/100/1000 ethernet for networking


@@ -144,6 +146,7 @@ Updated 13-July-2004 Jon Loeliger
     CONFIG_DDR_ECC         only for ECC DDR module
     CONFIG_DDR_DLL         DLL fix on some ADS boards needed for more
                            stability.
     CONFIG_DDR_ECC         only for ECC DDR module
     CONFIG_DDR_DLL         DLL fix on some ADS boards needed for more
                            stability.

+    CONFIG_HAS_FEC         If an FEC is on chip, set to 1, else 0.

 
 Other than the above definitions, the rest in the config files are
 straightforward.
 
 Other than the above definitions, the rest in the config files are
 straightforward.


@@ -191,10 +194,10 @@ straightforward.
 
 4.4 Reflash U-boot Image using U-boot
 
 
 4.4 Reflash U-boot Image using U-boot
 

-    => tftp 0 u-boot.bin
-    => protect off fff80000 ffffffff
-    => erase fff80000 ffffffff
-    => cp.b 0 fff80000 80000
+    tftp 10000 u-boot.bin
+    protect off fff80000 ffffffff
+    erase fff80000 ffffffff
+    cp.b 10000 fff80000 80000

 
 
 4.5 Reflash U-Boot with a BDI-2000
 
 
 4.5 Reflash U-Boot with a BDI-2000