+For rk3188 boards the general storage onto the card stays the same as
+described above, but the image creation needs a bit more care.
+
+The bootrom of rk3188 expects to find a small 1kb loader which returns
+control to the bootrom, after which it will load the real loader, which
+can then be up to 29kb in size and does the regular ddr init.
+
+Additionally the rk3188 requires everything the bootrom loads to be
+rc4-encrypted. Except for the very first stage the bootrom always reads
+and decodes 2kb pages, so files should be sized accordingly.
+
+# copy tpl, pad to 1020 bytes and append spl
+cat tpl/u-boot-tpl.bin > tplspl.bin
+truncate -s 1020 tplspl.bin
+cat spl/u-boot-spl.bin >> tplspl.bin
+tools/mkimage -n rk3188 -T rksd -d tplspl.bin out
+
+# truncate, encode and append u-boot.bin
+truncate -s %2048 u-boot.bin
+cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+
+
+Using fastboot on rk3288
+========================
+- Write GPT partition layout to mmc device which fastboot want to use it to
+store the image
+
+ => gpt write mmc 1 $partitions
+
+- Invoke fastboot command to prepare
+
+ => fastboot 1
+
+- Start fastboot request on PC
+
+ fastboot -i 0x2207 flash loader evb-rk3288/spl/u-boot-spl-dtb.bin
+
+You should see something like:
+
+ => fastboot 1
+ WARNING: unknown variable: partition-type:loader
+ Starting download of 357796 bytes
+ ..
+ downloading of 357796 bytes finished
+ Flashing Raw Image
+ ........ wrote 357888 bytes to 'loader'