Call __seterrno and save a few bytes.

[cc65] / doc / lynx.sgml

diff --git a/doc/lynx.sgml b/doc/lynx.sgml
index e76b6060ae4122d2660ce019761a7b75c55d4b55..856b909ec4f49daadf779b31dfd433dfdcf57c89 100644 (file)
--- a/doc/lynx.sgml
+++ b/doc/lynx.sgml
@@ -46,8 +46,7 @@ that shows how to create a complete bootable Lynx cart.
 <sect>Memory layout<p>
 
 cc65 generated programs with the default setup run with the I/O area and the
 <sect>Memory layout<p>
 
 cc65 generated programs with the default setup run with the I/O area and the

-kernal enabled, which gives a usable memory range of &dollar;400 - &dollar;BE3F.
-All boot ROM entry points may be called directly without additional code.
+kernal enabled, which gives a usable memory range of &dollar;400 - &dollar;C037.

 
 Special locations:
 
 
 Special locations:
 


@@ -63,12 +62,17 @@ Special locations:
   '?' for all keys down at the same time.
 
   <tag/Stack/
   '?' for all keys down at the same time.
 
   <tag/Stack/

-  The C runtime stack is located at &dollar;BE3F and growing downwards.
+  The C runtime stack is located at &dollar;C037 (or &dollar;A057 if collision
+  detection is enabled) and growing downwards.

 
   <tag/Heap/
   The C heap is located at the end of the program and grows towards the C
   runtime stack.
 
 
   <tag/Heap/
   The C heap is located at the end of the program and grows towards the C
   runtime stack.
 

+  <tag/Screen/
+  The collision detection screen is at &dollar;A058 if it is enabled. The
+  double buffered screens are at &dollar;C038 and &dollar;E018.
+

 </descrip><p>
 
 
 </descrip><p>
 
 


@@ -81,7 +85,6 @@ Programs containing Lynx specific code may use the <tt/lynx.h/ header file.
 <sect1>Lynx specific functions<p>
 
 <itemize>
 <sect1>Lynx specific functions<p>
 
 <itemize>

-<item>lynx_change_framerate

 <item>lynx_eeprom_erase
 <item>lynx_eeprom_read
 <item>lynx_eeprom_write
 <item>lynx_eeprom_erase
 <item>lynx_eeprom_read
 <item>lynx_eeprom_write


@@ -120,8 +123,9 @@ available, but must be statically linked, because no file I/O is available.
 See the documentation for the <htmlurl url="co65.html" name="co65 utility">
 for information on how to do that.
 
 See the documentation for the <htmlurl url="co65.html" name="co65 utility">
 for information on how to do that.
 

-The TGI driver is implemented as a dual buffering device. To use it as a
-single-buffer device set draw page and view page to the same value 0 or 1;
+The TGI driver is implemented as an interrupt driven dual buffering device.
+To use it as a single-buffer device set draw page and view page to the same
+value 0 or 1;

 
 The TGI driver has a few Lynx-specific extensions.
 
 
 The TGI driver has a few Lynx-specific extensions.
 


@@ -146,6 +150,10 @@ To update displays you can call tgi_updatedisplay() or tgi_ioctl(4, 1) it
 will wait for the next VBL interrupt and set the draw buffer to the
 view buffer. The draw buffer is also changed to (drawbuffer xor 1).
 
 will wait for the next VBL interrupt and set the draw buffer to the
 view buffer. The draw buffer is also changed to (drawbuffer xor 1).
 

+You can also enable or disable collision detection by a call to
+tgi_setcollisiondetection(active) or tgi_ioctl(5, active). The collision
+result is located before the sprite structure by default in this driver.
+

 <sect1>Extended memory drivers<p>
 
 No extended memory drivers are currently available for the Lynx.
 <sect1>Extended memory drivers<p>
 
 No extended memory drivers are currently available for the Lynx.


@@ -159,7 +167,7 @@ the <htmlurl url="co65.html" name="co65 utility"> for information on how to do
 that.
 
 The joystick will check to see if the screen is flipped or not in the install
 that.
 
 The joystick will check to see if the screen is flipped or not in the install

-routine and adapt itself to the currect state.
+routine and adapt itself to the correct state.

 
 <sect1>Mouse drivers<p>
 
 
 <sect1>Mouse drivers<p>
 


@@ -203,8 +211,13 @@ No mouse drivers are currently available for the Lynx.
   </itemize>
   The parity bit supports MARK and SPACE. It also supports EVEN and ODD parity
   but the parity bit is included in the calculation. Most of us don't want it
   </itemize>
   The parity bit supports MARK and SPACE. It also supports EVEN and ODD parity
   but the parity bit is included in the calculation. Most of us don't want it

-  this way. But there is nothing we can do about it. Just don't use EVEN or ODD
-  when communicating to other equipment than the Lynx. 
+  this way. But there is nothing we can do about it.
+
+  The Lynx hardware will always check parity on incoming traffic. Currently
+  the driver cannot receive data from standard PC's due to this parity bug.
+  For working with Lynx to Lynx communication use EVEN parity.
+
+  To send data to standard PC's use MARK or SPACE as parity setting.

 
   There is always only one stop bit. And the data length is always 8 bits.
 
 
   There is always only one stop bit. And the data length is always 8 bits.
 


@@ -215,6 +228,7 @@ No mouse drivers are currently available for the Lynx.
   area $200-$2ff for the transmit ring buffer and $300-$3ff for the receive
   ring buffer. This area can not be used at startup for anything as the Lynx
   ROM needs this area for decryption purposes.
   area $200-$2ff for the transmit ring buffer and $300-$3ff for the receive
   ring buffer. This area can not be used at startup for anything as the Lynx
   ROM needs this area for decryption purposes.

+

 </descrip><p>
 
 
 </descrip><p>