+@deffn {Flash Driver} fm3
+All members of the FM3 microcontroller family from Fujitsu
+include internal flash and use ARM Cortex-M3 cores.
+The @var{fm3} driver uses the @var{target} parameter to select the
+correct bank config, it can currently be one of the following:
+@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
+@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
+
+@example
+flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
+@end example
+@end deffn
+
+@deffn {Flash Driver} fm4
+All members of the FM4 microcontroller family from Spansion (formerly Fujitsu)
+include internal flash and use ARM Cortex-M4 cores.
+The @var{fm4} driver uses a @var{family} parameter to select the
+correct bank config, it can currently be one of the following:
+@code{MB9BFx64}, @code{MB9BFx65}, @code{MB9BFx66}, @code{MB9BFx67}, @code{MB9BFx68},
+@code{S6E2Cx8}, @code{S6E2Cx9}, @code{S6E2CxA} or @code{S6E2Dx},
+with @code{x} treated as wildcard and otherwise case (and any trailing
+characters) ignored.
+
+@example
+flash bank $@{_FLASHNAME@}0 fm4 0x00000000 0 0 0 $_TARGETNAME S6E2CCAJ0A
+flash bank $@{_FLASHNAME@}1 fm4 0x00100000 0 0 0 $_TARGETNAME S6E2CCAJ0A
+@end example
+@emph{The current implementation is incomplete. Protection is not supported,
+nor is Chip Erase (only Sector Erase is implemented).}
+@end deffn
+
+@deffn {Flash Driver} kinetis
+@cindex kinetis
+Kx and KLx members of the Kinetis microcontroller family from Freescale include
+internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically
+recognizes flash size and a number of flash banks (1-4) using the chip
+identification register, and autoconfigures itself.
+
+@example
+flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
+@end example
+
+@deffn Command {kinetis mdm check_security}
+Checks status of device security lock. Used internally in examine-end event.
+@end deffn
+
+@deffn Command {kinetis mdm halt}
+Issues a halt via the MDM-AP. This command can be used to break a watchdog reset
+loop when connecting to an unsecured target.
+@end deffn
+
+@deffn Command {kinetis mdm mass_erase}
+Issues a complete flash erase via the MDM-AP. This can be used to erase a chip
+back to its factory state, removing security. It does not require the processor
+to be halted, however the target will remain in a halted state after this
+command completes.
+@end deffn
+
+@deffn Command {kinetis nvm_partition}
+For FlexNVM devices only (KxxDX and KxxFX).
+Command shows or sets data flash or EEPROM backup size in kilobytes,
+sets two EEPROM blocks sizes in bytes and enables/disables loading
+of EEPROM contents to FlexRAM during reset.
+
+For details see device reference manual, Flash Memory Module,
+Program Partition command.
+
+Setting is possible only once after mass_erase.
+Reset the device after partition setting.
+
+Show partition size:
+@example
+kinetis nvm_partition info
+@end example
+
+Set 32 KB data flash, rest of FlexNVM is EEPROM backup. EEPROM has two blocks
+of 512 and 1536 bytes and its contents is loaded to FlexRAM during reset:
+@example
+kinetis nvm_partition dataflash 32 512 1536 on
+@end example
+
+Set 16 KB EEPROM backup, rest of FlexNVM is a data flash. EEPROM has two blocks
+of 1024 bytes and its contents is not loaded to FlexRAM during reset:
+@example
+kinetis nvm_partition eebkp 16 1024 1024 off
+@end example
+@end deffn
+
+@deffn Command {kinetis mdm reset}
+Issues a reset via the MDM-AP. This causes the MCU to output a low pulse on the
+RESET pin, which can be used to reset other hardware on board.
+@end deffn
+
+@deffn Command {kinetis disable_wdog}
+For Kx devices only (KLx has different COP watchdog, it is not supported).
+Command disables watchdog timer.
+@end deffn
+@end deffn
+
+@deffn {Flash Driver} kinetis_ke
+@cindex kinetis_ke
+KE members of the Kinetis microcontroller family from Freescale include
+internal flash and use ARM Cortex-M0+. The driver automatically recognizes
+the KE family and sub-family using the chip identification register, and
+autoconfigures itself.
+
+@example
+flash bank $_FLASHNAME kinetis_ke 0 0 0 0 $_TARGETNAME
+@end example
+
+@deffn Command {kinetis_ke mdm check_security}
+Checks status of device security lock. Used internally in examine-end event.
+@end deffn
+
+@deffn Command {kinetis_ke mdm mass_erase}
+Issues a complete Flash erase via the MDM-AP.
+This can be used to erase a chip back to its factory state.
+Command removes security lock from a device (use of SRST highly recommended).
+It does not require the processor to be halted.
+@end deffn
+
+@deffn Command {kinetis_ke disable_wdog}
+Command disables watchdog timer.
+@end deffn
+@end deffn
+