spi: zynqmp_gqspi: Add support for ZynqMP qspi driver

[u-boot] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2cdb11025f88afea542ef70d552bc84709068547..b85fca562899eecc78f853f22ee7579d66cfc068 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -1,4 +1,7 @@
-menu "SPI Support"
+menuconfig SPI
+       bool "SPI Support"
+
+if SPI

 
 config DM_SPI
        bool "Enable Driver Model for SPI drivers"
 
 config DM_SPI
        bool "Enable Driver Model for SPI drivers"


@@ -23,6 +26,53 @@ config ALTERA_SPI
          IP core. Please find details on the "Embedded Peripherals IP
          User Guide" of Altera.
 
          IP core. Please find details on the "Embedded Peripherals IP
          User Guide" of Altera.
 

+config ATCSPI200_SPI
+       bool "Andestech ATCSPI200 SPI driver"
+       help
+         Enable the Andestech ATCSPI200 SPI driver. This driver can be
+         used to access the SPI flash on AE3XX and AE250 platforms embedding
+         this Andestech IP core.
+
+config ATH79_SPI
+       bool "Atheros SPI driver"
+       depends on ARCH_ATH79
+       help
+         Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
+         to access SPI NOR flash and other SPI peripherals. This driver
+         uses driver model and requires a device tree binding to operate.
+         please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
+
+config ATMEL_SPI
+       bool "Atmel SPI driver"
+       default y if ARCH_AT91
+       help
+         This enables driver for the Atmel SPI Controller, present on
+         many AT91 (ARM) chips. This driver can be used to access
+         the SPI Flash, such as AT25DF321.
+
+config BCM63XX_HSSPI
+       bool "BCM63XX HSSPI driver"
+       depends on ARCH_BMIPS
+       help
+         Enable the BCM6328 HSSPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this Broadcom
+         SPI core.
+
+config BCM63XX_SPI
+       bool "BCM6348 SPI driver"
+       depends on ARCH_BMIPS
+       help
+         Enable the BCM6348/BCM6358 SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding these Broadcom
+         SPI cores.
+
+config BCMSTB_SPI
+       bool "BCMSTB SPI driver"
+       help
+         Enable the Broadcom set-top box SPI driver. This driver can
+         be used to access the SPI flash on platforms embedding this
+         Broadcom SPI core.
+

 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help
 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help


@@ -52,13 +102,6 @@ config FSL_DSPI
          this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
          use this driver.
 
          this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
          use this driver.
 

-config FSL_QSPI
-       bool "Freescale QSPI driver"
-       help
-         Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
-         used to access the SPI NOR flash on platforms embedding this
-         Freescale IP core.
-

 config ICH_SPI
        bool "Intel ICH SPI driver"
        help
 config ICH_SPI
        bool "Intel ICH SPI driver"
        help


@@ -66,6 +109,30 @@ config ICH_SPI
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 

+config MVEBU_A3700_SPI
+       bool "Marvell Armada 3700 SPI driver"
+       select CLK_ARMADA_3720
+       help
+         Enable the Marvell Armada 3700 SPI driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Marvell IP core.
+
+config PIC32_SPI
+       bool "Microchip PIC32 SPI driver"
+       depends on MACH_PIC32
+       help
+         Enable the Microchip PIC32 SPI driver. This driver can be used
+         to access the SPI NOR flash, MMC-over-SPI on platforms based on
+         Microchip PIC32 family devices.
+
+config RENESAS_RPC_SPI
+       bool "Renesas RPC SPI driver"
+       depends on RCAR_GEN3
+       help
+         Enable the Renesas RPC SPI driver, used to access SPI NOR flash
+         on Renesas RCar Gen3 SoCs. This uses driver model and requires a
+         device tree binding to operate.
+

 config ROCKCHIP_SPI
        bool "Rockchip SPI driver"
        help
 config ROCKCHIP_SPI
        bool "Rockchip SPI driver"
        help


@@ -99,6 +166,14 @@ config SANDBOX_SPI
                };
          };
 
                };
          };
 

+config STM32_QSPI
+       bool "STM32F7 QSPI driver"
+       depends on STM32F7
+       help
+         Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash chips on platforms embedding
+         this ST IP core.
+

 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help
 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help


@@ -155,8 +230,27 @@ config ZYNQ_QSPI
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 

+config ZYNQMP_GQSPI
+       bool "Configure ZynqMP Generic QSPI"
+       depends on ARCH_ZYNQMP
+       help
+         This option is used to enable ZynqMP QSPI controller driver which
+         is used to communicate with qspi flash devices.
+

 endif # if DM_SPI
 
 endif # if DM_SPI
 

+config SOFT_SPI
+       bool "Soft SPI driver"
+       help
+        Enable Soft SPI driver. This driver is to use GPIO simulate
+        the SPI protocol.
+
+config CF_SPI
+       bool "ColdFire SPI driver"
+       help
+         Enable the ColdFire SPI driver. This driver can be used on
+         some m68k SoCs.
+

 config FSL_ESPI
        bool "Freescale eSPI driver"
        help
 config FSL_ESPI
        bool "Freescale eSPI driver"
        help


@@ -164,10 +258,76 @@ config FSL_ESPI
          access the SPI interface and SPI NOR flash on platforms embedding
          this Freescale eSPI IP core.
 
          access the SPI interface and SPI NOR flash on platforms embedding
          this Freescale eSPI IP core.
 

+config FSL_QSPI
+       bool "Freescale QSPI driver"
+       help
+         Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Freescale IP core.
+
+config DAVINCI_SPI
+       bool "Davinci & Keystone SPI driver"
+       depends on ARCH_DAVINCI || ARCH_KEYSTONE
+       help
+         Enable the Davinci SPI driver
+
+config SH_SPI
+       bool "SuperH SPI driver"
+       help
+         Enable the SuperH SPI controller driver. This driver can be used
+         on various SuperH SoCs, such as SH7757.
+
+config SH_QSPI
+       bool "Renesas Quad SPI driver"
+       help
+         Enable the Renesas Quad SPI controller driver. This driver can be
+         used on Renesas SoCs.
+

 config TI_QSPI
        bool "TI QSPI driver"
        help
          Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
          This driver support spi flash single, quad and memory reads.
 
 config TI_QSPI
        bool "TI QSPI driver"
        help
          Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
          This driver support spi flash single, quad and memory reads.
 

-endmenu # menu "SPI Support"
+config KIRKWOOD_SPI
+       bool "Marvell Kirkwood SPI Driver"
+       help
+         Enable support for SPI on various Marvell SoCs, such as
+         Kirkwood and Armada 375.
+
+config LPC32XX_SSP
+       bool "LPC32XX SPI Driver"
+       help
+         Enable support for SPI on LPC32xx
+
+config MPC8XX_SPI
+       bool "MPC8XX SPI Driver"
+       depends on MPC8xx
+       help
+         Enable support for SPI on MPC8XX
+
+config MPC8XXX_SPI
+       bool "MPC8XXX SPI Driver"
+       help
+         Enable support for SPI on the MPC8XXX PowerPC SoCs.
+
+config MXC_SPI
+       bool "MXC SPI Driver"
+       help
+         Enable the MXC SPI controller driver. This driver can be used
+         on various i.MX SoCs such as i.MX31/35/51/6/7.
+
+config MXS_SPI
+       bool "MXS SPI Driver"
+       help
+         Enable the MXS SPI controller driver. This driver can be used
+         on the i.MX23 and i.MX28 SoCs.
+
+config OMAP3_SPI
+       bool "McSPI driver for OMAP"
+       help
+         SPI master controller for OMAP24XX and later Multichannel SPI
+         (McSPI). This driver be used to access SPI chips on platforms
+         embedding this OMAP3 McSPI IP core.
+
+endif # menu "SPI Support"