mvebu: usb: xhci: Add VBUS regulator supply to the host driver

[u-boot] / drivers / usb / host / Kconfig

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 89580cc31f786b936096c0cc94cff0009b9f0623..0bf8274405f1e097a275941d343229272b06bb04 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -3,39 +3,52 @@
 #
 comment "USB Host Controller Drivers"
 
 #
 comment "USB Host Controller Drivers"
 

+config USB_HOST
+       bool
+

 config USB_XHCI_HCD
        bool "xHCI HCD (USB 3.0) support"
 config USB_XHCI_HCD
        bool "xHCI HCD (USB 3.0) support"

+       select USB_HOST

        ---help---
          The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
          "SuperSpeed" host controller hardware.
 
 if USB_XHCI_HCD
 
        ---help---
          The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
          "SuperSpeed" host controller hardware.
 
 if USB_XHCI_HCD
 

-config USB_XHCI_UNIPHIER
-       bool "Support for UniPhier on-chip xHCI USB controller"
-       depends on ARCH_UNIPHIER
-       default y
-       ---help---
-         Enables support for the on-chip xHCI controller on UniPhier SoCs.
-

 config USB_XHCI_DWC3
        bool "DesignWare USB3 DRD Core Support"
        help
          Say Y or if your system has a Dual Role SuperSpeed
          USB controller based on the DesignWare USB3 IP Core.
 
 config USB_XHCI_DWC3
        bool "DesignWare USB3 DRD Core Support"
        help
          Say Y or if your system has a Dual Role SuperSpeed
          USB controller based on the DesignWare USB3 IP Core.
 

-endif
+config USB_XHCI_MVEBU
+       bool "MVEBU USB 3.0 support"
+       default y
+       depends on ARCH_MVEBU
+       select DM_REGULATOR
+       help
+         Choose this option to add support for USB 3.0 driver on mvebu
+         SoCs, which includes Armada8K, Armada3700 and other Armada
+         family SoCs.

 
 

-config USB_OHCI_GENERIC
-       bool "Support for generic OHCI USB controller"
-       depends on OF_CONTROL
-       depends on DM_USB
-       default n
-       ---help---
-         Enables support for generic OHCI controller.
+config USB_XHCI_ROCKCHIP
+       bool "Support for Rockchip on-chip xHCI USB controller"
+       depends on ARCH_ROCKCHIP
+       default y
+       help
+         Enables support for the on-chip xHCI controller on Rockchip SoCs.
+
+config USB_XHCI_ZYNQMP
+       bool "Support for Xilinx ZynqMP on-chip xHCI USB controller"
+       depends on ARCH_ZYNQMP
+       help
+         Enables support for the on-chip xHCI controller on Xilinx ZynqMP SoCs.
+
+endif # USB_XHCI_HCD

 
 config USB_EHCI_HCD
        bool "EHCI HCD (USB 2.0) support"
 
 config USB_EHCI_HCD
        bool "EHCI HCD (USB 2.0) support"

+       select USB_HOST

        ---help---
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
        ---help---
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.


@@ -60,6 +73,13 @@ config USB_EHCI
 
 if USB_EHCI_HCD
 
 
 if USB_EHCI_HCD
 

+config USB_EHCI_ATMEL
+       bool  "Support for Atmel on-chip EHCI USB controller"
+       depends on ARCH_AT91
+       default y
+       ---help---
+         Enables support for the on-chip EHCI controller on Atmel chips.
+

 config USB_EHCI_MARVELL
        bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
        depends on ARCH_MVEBU
 config USB_EHCI_MARVELL
        bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
        depends on ARCH_MVEBU


@@ -74,6 +94,22 @@ config USB_EHCI_MX6
        ---help---
          Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
        ---help---
          Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 

+config USB_EHCI_MX7
+       bool "Support for i.MX7 on-chip EHCI USB controller"
+       depends on ARCH_MX7
+       default y
+       ---help---
+         Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+
+if USB_EHCI_MX7
+
+config MXC_USB_OTG_HACTIVE
+       bool "USB Power pin high active"
+       ---help---
+         Set the USB Power pin polarity to be high active (PWR_POL)
+
+endif
+

 config USB_EHCI_MSM
        bool "Support for Qualcomm on-chip EHCI USB controller"
        depends on DM_USB
 config USB_EHCI_MSM
        bool "Support for Qualcomm on-chip EHCI USB controller"
        depends on DM_USB


@@ -85,6 +121,13 @@ config USB_EHCI_MSM
          This driver supports combination of Chipidea USB controller
          and Synapsys USB PHY in host mode only.
 
          This driver supports combination of Chipidea USB controller
          and Synapsys USB PHY in host mode only.
 

+config USB_EHCI_ZYNQ
+       bool "Support for Xilinx Zynq on-chip EHCI USB controller"
+       depends on ARCH_ZYNQ
+       default y
+       ---help---
+         Enable support for Zynq on-chip EHCI USB controller
+

 config USB_EHCI_GENERIC
        bool "Support for generic EHCI USB controller"
        depends on OF_CONTROL
 config USB_EHCI_GENERIC
        bool "Support for generic EHCI USB controller"
        depends on OF_CONTROL


@@ -93,4 +136,46 @@ config USB_EHCI_GENERIC
        ---help---
          Enables support for generic EHCI controller.
 
        ---help---
          Enables support for generic EHCI controller.
 

-endif
+endif # USB_EHCI_HCD
+
+config USB_OHCI_HCD
+       bool "OHCI HCD (USB 1.1) support"
+       ---help---
+         The Open Host Controller Interface (OHCI) is a standard for accessing
+         USB 1.1 host controller hardware.  It does more in hardware than Intel's
+         UHCI specification.  If your USB host controller follows the OHCI spec,
+         say Y.  On most non-x86 systems, and on x86 hardware that's not using a
+         USB controller from Intel or VIA, this is appropriate.  If your host
+         controller doesn't use PCI, this is probably appropriate.  For a PCI
+         based system where you're not sure, the "lspci -v" entry will list the
+         right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
+
+if USB_OHCI_HCD
+
+config USB_OHCI_GENERIC
+       bool "Support for generic OHCI USB controller"
+       depends on OF_CONTROL
+       depends on DM_USB
+       select USB_HOST
+       ---help---
+         Enables support for generic OHCI controller.
+
+endif # USB_OHCI_HCD
+
+config USB_UHCI_HCD
+       bool "UHCI HCD (most Intel and VIA) support"
+       select USB_HOST
+       ---help---
+         The Universal Host Controller Interface is a standard by Intel for
+         accessing the USB hardware in the PC (which is also called the USB
+         host controller). If your USB host controller conforms to this
+         standard, you may want to say Y, but see below. All recent boards
+         with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+         i810, i820) conform to this standard. Also all VIA PCI chipsets
+         (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+         133) and LEON/GRLIB SoCs with the GRUSBHC controller.
+         If unsure, say Y.
+
+if USB_UHCI_HCD
+
+endif # USB_UHCI_HCD