+#else
+struct ehci_mx6_priv_data {
+ struct ehci_ctrl ctrl;
+ struct usb_ehci *ehci;
+ struct udevice *vbus_supply;
+ enum usb_init_type init_type;
+ int portnr;
+};
+
+static int mx6_init_after_reset(struct ehci_ctrl *dev)
+{
+ struct ehci_mx6_priv_data *priv = dev->priv;
+ enum usb_init_type type = priv->init_type;
+ struct usb_ehci *ehci = priv->ehci;
+ int ret;
+
+ ret = ehci_mx6_common_init(priv->ehci, priv->portnr);
+ if (ret)
+ return ret;
+
+ if (priv->vbus_supply) {
+ ret = regulator_set_enable(priv->vbus_supply,
+ (type == USB_INIT_DEVICE) ?
+ false : true);
+ if (ret) {
+ puts("Error enabling VBUS supply\n");
+ return ret;
+ }
+ }
+
+ if (type == USB_INIT_DEVICE)
+ return 0;
+
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+
+ mdelay(10);
+
+ return 0;
+}
+
+static const struct ehci_ops mx6_ehci_ops = {
+ .init_after_reset = mx6_init_after_reset
+};
+
+static int ehci_usb_phy_mode(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ void *__iomem addr = (void *__iomem)dev_get_addr(dev);
+ void *__iomem phy_ctrl, *__iomem phy_status;
+ const void *blob = gd->fdt_blob;
+ int offset = dev_of_offset(dev), phy_off;
+ u32 val;
+
+ /*
+ * About fsl,usbphy, Refer to
+ * Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt.
+ */
+ if (is_mx6()) {
+ phy_off = fdtdec_lookup_phandle(blob,
+ offset,
+ "fsl,usbphy");
+ if (phy_off < 0)
+ return -EINVAL;
+
+ addr = (void __iomem *)fdtdec_get_addr(blob, phy_off,
+ "reg");
+ if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ phy_ctrl = (void __iomem *)(addr + USBPHY_CTRL);
+ val = readl(phy_ctrl);
+
+ if (val & USBPHY_CTRL_OTG_ID)
+ plat->init_type = USB_INIT_DEVICE;
+ else
+ plat->init_type = USB_INIT_HOST;
+ } else if (is_mx7()) {
+ phy_status = (void __iomem *)(addr +
+ USBNC_PHY_STATUS_OFFSET);
+ val = readl(phy_status);
+
+ if (val & USBNC_PHYSTATUS_ID_DIG)
+ plat->init_type = USB_INIT_DEVICE;
+ else
+ plat->init_type = USB_INIT_HOST;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ const char *mode;
+
+ mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "dr_mode", NULL);
+ if (mode) {
+ if (strcmp(mode, "peripheral") == 0)
+ plat->init_type = USB_INIT_DEVICE;
+ else if (strcmp(mode, "host") == 0)
+ plat->init_type = USB_INIT_HOST;
+ else if (strcmp(mode, "otg") == 0)
+ return ehci_usb_phy_mode(dev);
+ else
+ return -EINVAL;
+
+ return 0;
+ }
+
+ return ehci_usb_phy_mode(dev);
+}
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
+ struct ehci_mx6_priv_data *priv = dev_get_priv(dev);
+ enum usb_init_type type = plat->init_type;
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ int ret;
+
+ priv->ehci = ehci;
+ priv->portnr = dev->seq;
+ priv->init_type = type;
+
+ ret = device_get_supply_regulator(dev, "vbus-supply",
+ &priv->vbus_supply);
+ if (ret)
+ debug("%s: No vbus supply\n", dev->name);
+
+ ret = ehci_mx6_common_init(ehci, priv->portnr);
+ if (ret)
+ return ret;
+
+ if (priv->vbus_supply) {
+ ret = regulator_set_enable(priv->vbus_supply,
+ (type == USB_INIT_DEVICE) ?
+ false : true);
+ if (ret) {
+ puts("Error enabling VBUS supply\n");
+ return ret;
+ }
+ }
+
+ if (priv->init_type == USB_INIT_HOST) {
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+ }
+
+ mdelay(10);
+
+ hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ hcor = (struct ehci_hcor *)((uint32_t)hccr +
+ HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
+
+ return ehci_register(dev, hccr, hcor, &mx6_ehci_ops, 0, priv->init_type);
+}
+
+static const struct udevice_id mx6_usb_ids[] = {
+ { .compatible = "fsl,imx27-usb" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_mx6) = {
+ .name = "ehci_mx6",
+ .id = UCLASS_USB,
+ .of_match = mx6_usb_ids,
+ .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+ .probe = ehci_usb_probe,
+ .remove = ehci_deregister,
+ .ops = &ehci_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct ehci_mx6_priv_data),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif