Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set

[u-boot] / env / Kconfig

diff --git a/env/Kconfig b/env/Kconfig
index 20321f862e182b20c6b3bfbda19e13da25cf6182..f12ef286345855eb604109df7cc70b4d95c48673 100644 (file)
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -68,40 +68,10 @@ config ENV_IS_IN_EEPROM
          These two #defines specify the offset and size of the
          environment area within the total memory of your EEPROM.
 
          These two #defines specify the offset and size of the
          environment area within the total memory of your EEPROM.
 

-         - CONFIG_SYS_I2C_EEPROM_ADDR:
-         If defined, specified the chip address of the EEPROM device.
-         The default address is zero.
-
-         - CONFIG_SYS_I2C_EEPROM_BUS:
-         If defined, specified the i2c bus of the EEPROM device.
-
-         - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
-         If defined, the number of bits used to address bytes in a
-         single page in the EEPROM device.  A 64 byte page, for example
-         would require six bits.
-
-         - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
-         If defined, the number of milliseconds to delay between
-         page writes.  The default is zero milliseconds.
-
-         - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
-         The length in bytes of the EEPROM memory array address.  Note
-         that this is NOT the chip address length!
-
-         - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
-         EEPROM chips that implement "address overflow" are ones
-         like Catalyst 24WC04/08/16 which has 9/10/11 bits of
-         address and the extra bits end up in the "chip address" bit
-         slots. This makes a 24WC08 (1Kbyte) chip look like four 256
-         byte chips.
-

          Note that we consider the length of the address field to
          still be one byte because the extra address bits are hidden
          in the chip address.
 
          Note that we consider the length of the address field to
          still be one byte because the extra address bits are hidden
          in the chip address.
 

-         - CONFIG_SYS_EEPROM_SIZE:
-         The size in bytes of the EEPROM device.
-

          - CONFIG_ENV_EEPROM_IS_ON_I2C
          define this, if you have I2C and SPI activated, and your
          EEPROM, which holds the environment, is on the I2C bus.
          - CONFIG_ENV_EEPROM_IS_ON_I2C
          define this, if you have I2C and SPI activated, and your
          EEPROM, which holds the environment, is on the I2C bus.