+/**
+ * spi_do_alloc_slave - Allocate a new SPI slave (internal)
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select. Use the helper macro spi_alloc_slave() to call this.
+ *
+ * @offset: Offset of struct spi_slave within slave structure
+ * @size: Size of slave structure
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
+ unsigned int cs);
+
+/**
+ * spi_alloc_slave - Allocate a new SPI slave
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select.
+ *
+ * @_struct: Name of structure to allocate (e.g. struct tegra_spi). This
+ * structure must contain a member 'struct spi_slave *slave'.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+#define spi_alloc_slave(_struct, bus, cs) \
+ spi_do_alloc_slave(offsetof(_struct, slave), \
+ sizeof(_struct), bus, cs)
+
+/**
+ * spi_alloc_slave_base - Allocate a new SPI slave with no private data
+ *
+ * Allocate and zero all fields in the spi slave, and set the bus/chip
+ * select.
+ *
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ */
+#define spi_alloc_slave_base(bus, cs) \
+ spi_do_alloc_slave(0, sizeof(struct spi_slave), bus, cs)
+
+/*-----------------------------------------------------------------------
+ * Set up communications parameters for a SPI slave.
+ *
+ * This must be called once for each slave. Note that this function
+ * usually doesn't touch any actual hardware, it only initializes the
+ * contents of spi_slave so that the hardware can be easily
+ * initialized later.
+ *
+ * bus: Bus ID of the slave chip.
+ * cs: Chip select ID of the slave chip on the specified bus.
+ * max_hz: Maximum SCK rate in Hz.
+ * mode: Clock polarity, clock phase and other parameters.
+ *
+ * Returns: A spi_slave reference that can be used in subsequent SPI
+ * calls, or NULL if one or more of the parameters are not supported.
+ */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+
+/*-----------------------------------------------------------------------
+ * Free any memory associated with a SPI slave.
+ *
+ * slave: The SPI slave
+ */
+void spi_free_slave(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Claim the bus and prepare it for communication with a given slave.
+ *
+ * This must be called before doing any transfers with a SPI slave. It
+ * will enable and initialize any SPI hardware as necessary, and make
+ * sure that the SCK line is in the correct idle state. It is not
+ * allowed to claim the same bus for several slaves without releasing
+ * the bus in between.
+ *
+ * slave: The SPI slave
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+int spi_claim_bus(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Release the SPI bus
+ *
+ * This must be called once for every call to spi_claim_bus() after
+ * all transfers have finished. It may disable any SPI hardware as
+ * appropriate.
+ *
+ * slave: The SPI slave
+ */
+void spi_release_bus(struct spi_slave *slave);