Added changelog entry for previous small commits and extended README on

[u-boot] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index 557e3196055fe65073aa57abe6f8c030d65f23a7..197af8d5020293ee9b7c761697d55a9fd9dd2b4f 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,129 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Extended README entry on coding style
+
+* Added another example showing simple interrupt interception.
+
+* Added simple_strtoul(), getenv() and setenv() to the exported functions.
+  Also bumped up ABI version to reflect this change.
+
+* Added interrupt handling capabilities for mpc5xxx processors.
+  Also added Linux like BUG() macros.
+
+* Add splashscreen support for MCC200 board.
+
+* Make the serial driver framework work with CONFIG_SERIAL_MULTI
+  enabled
+
+* PCIe endpoint support for AMCC Yucca 440SPe board
+  Patch by Tirumala R Marri, 26 Aug 2006
+
+* Improve DIMM detection for AMCC Yucca 440SPe board
+  Improved the memory DIMM detection for the Yucca 440SPe board for
+  the case where a memory DIMM is falsely detected as present.
+  This issue is seen on some AMCC Yucca 440SPe validation boards if
+  only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+  populated and DIMM slot 1 is empty.  In this case, U-Boot does
+  not correctly detect that there is only one DIMM memory module
+  installed and will falsely detect two DIMM memory modules are
+  present and therefore U-Boot will not calculate the correct amount
+  of total memory and u-boot will not booting up.
+  Patch by Adam Graham, 24 Aug 2006
+
+* Fix typo.
+
+* Code cleanup
+
+* Update for MCC200 / PRS200 boards:
+  - auto-adjust console device for Linux.
+  - fix typos.
+
+* Add a fix for a buggy USB device on the FO300 board.
+
+* Updates for MCC200 / PRS200 boards:
+  - support for configurations with SDRAM or DDR memory,
+  - support for highboot and lowboot
+  - adjusting environment definitions
+
+* Add support for WTK FO300 board (TQM5200 based).
+
+* Fix TQM834x hang.
+
+* Update for SC520 board.
+  Patch by David Updegraff, 02 Dec 2005
+
+* Fixed common.h spelling error.
+  Patch by Cory Tusar, 30 Nov 2005
+
+* Fix typo.
+  Patch by Andreas Engel, 28 Nov 2005
+
+* Fix fatload command on FAT32 formatted partitions.
+  Patch by Joachim Jaeger, 18 Nov 2005
+
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+  Patch by Eric Benard, 17 Nov 2005
+
+* Cleanup debug code for yucca board.
+
+* MCC200: restrict addressable flash space to 32 MB
+
+* Add debug console on COM12 for MCC200 board
+
+* Fix control-c handing in CONFIG_CMDLINE_EDITING
+  Properly pass break code back from readline.
+  Patch by Roger Blofeld, 31 Jul 2006
+
+* Add commandline history support to all AMCC eval boards
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Add Macronix MXLV320T flash support for AMCC Bamboo
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Change "mii info" to not print an error upon missing PHY at address
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Fix PCI-Express on PPC440SPe rev. A.
+
+* Fix preboot message on TQM85xx after switching to hush parser.
+
+* Adapt TQM85xx ramdisk address to Linux kernel memory map
+
+* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+
+* Fix compiler warning for TRAB board.
+  Patch by Martin Krause, 07 Aug 2006
+
+* Prevent USB commands from working when USB is stopped.
+
+* Add rudimentary handling of alternate settings of USB interfaces.
+  This is in order to fix issues with some USB sticks timing out
+  during initialization. Some code readability improvements.
+
+* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
+  AMCC suggested to set the PMU bit to 0 for best performace on
+  the PPC440 DDR controller.
+  Please see doc/README.440-DDR-performance for details.
+  Patch by Stefan Roese, 28 Jul 2006
+
+* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
+  Please see doc/README.bamboo for details.
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix CONFIG_CMDLINE_EDITING implementation
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix preboot message on TQM5200 after switching to hush parser.
+
+* MCC200: set default configuration to low_boot DDR,
+  and support for configurable options high_boot and/or SDRAM.
+
+* Add support for 256 MB SDRAM on CPU87
+  Patch by Josef Wagner, 25 Nov 2005
+
+* Add configuration for cam5200 board (based on TQM5200S).
+
 * More code cleanup
 
 * Disabled kvme080 board in MAKEALL because of build problems.