+commit 43ddd9c820fec44816188f53346b464e20b3142d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 22 14:23:49 2008 -0400
+
+ Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
+
+ These defines embedded the u-boot env variables and/or the bd_t structure
+ in the fdt blob. The conclusion of discussion on the u-boot email list
+ was that embedding these in the fdt blob is not useful: there are better
+ ways of passing the data (in fact, the fdt blob itself replaces the
+ bd_t struct).
+
+ The only board that enables these is the stxxtc and they don't appear
+ to be used by linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 22ed2285743359fd1fe73e411dff914b2256e68f
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 17 10:49:25 2008 +0100
+
+ rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 17 08:54:06 2008 +0900
+
+ Add Flex-OneNAND booting support
+
+ Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
+ using a NOR Flash interface. This on-chip integration enables system designers
+ to reduce external system logic and use high-density NAND Flash
+ in applications that would otherwise have to use more NOR components.
+
+ Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
+ in more flexible way. While MLC area of Flex-OneNAND can be used to store data
+ that require low reliability and high density, SLC area of Flex-OneNAND
+ to store data that need high reliability and high performance. Flex-OneNAND
+ can let users take advantage of storing these two different types of data
+ into one chip, which is making Flex-OneNAND more cost- and space-effective.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c512389cc4a10253249271ff6c887c6dab1f0db2
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 13 13:50:52 2008 +0100
+
+ MPC5200: support setup without FEC
+
+ Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
+ defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit aa3511e422946041ef626f80a05ae5e8bfc700e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:46 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f1d846e5c5754449c286587d099d85246062772
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:47 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:45 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:33 2008 +0900
+
+ net: Add support AX88796L ethernet device
+
+ AX88796L is device of NE2000 compatible.
+ This patch support AX88796L ethernet device.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e0a6140dd381e1eed1ada2291166ef2616d8822b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 25 22:50:41 2008 +0100
+
+ ne2000 driver: change #ifdef to Makefile conditional compilation
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e710185aae90c64d39c2d453e40e58ceefe4f250
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:20 2008 +0900
+
+ net: Divided code of NE2000 ethernet driver
+
+ There are more devices of the NE2000 base.
+ A present code is difficult for us to support more devices.
+ To support more NE2000 clone devices, separated the function.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 395bce4f59a507a60a475f7ee46bed47de9482df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:58:13 2008 -0500
+
+ net/Blackfin: move on-chip MAC driver into drivers/net/
+
+ The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
+ directory, but it is not board specific, so relocate it to the drivers dir
+ so that other Blackfin ports can utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:52:35 2008 -0500
+
+ smc91111: use SSYNC() rather than asm(ssync) for Blackfin
+
+ Since the "ssync" instruction may have hardware anomalies associated with
+ it, have the smc91111 driver use the SSYNC macro rather than invoking it
+ directly. We workaround all the anomalies via this macro.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Sun Feb 17 22:57:47 2008 +0000
+
+ 8xx: Update OF support on 8xx
+
+ This patch does some shifting around of OF support on 8xx.
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit 9c666a7db0b2285a270c68810889ce7d5dba304b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 15:16:18 2008 -0600
+
+ ppc: Allow boards to specify how much memory they can map
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capble of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Fri Feb 15 01:05:58 2008 +0000
+
+ 8xx : Add OF support to Adder875 board port - resubmit
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 20:44:42 2008 -0600
+
+ Add setexpr command
+
+ Add a simple expr style command that will set an env variable as the result
+ of the command. This allows us to do simple math in shell. The following
+ operations are supported: &, |, ^, +, -, *, /.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f105faa64b9826e088711fdfcaa70cb1230397a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:27:48 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 449c703374a8868453425e15da7e2f76221b72e4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:21:43 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5863577989ad689427bb750107e9a75f1c1645d2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 16:41:41 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8a773983957ee6c4aa344469b742f29c7d26afbd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:08 2008 +0900
+
+ [MIPS] Move gth2_config from ARM section to MIPS
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Fix dcache_status()
+
+ You can't judge UNCACHED by Config.K0 LSB.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Introduce _machine_restart
+
+ Handles machine specific functions by using weak functions.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit decaba6f5cf386d569ac3997bebb871b966c6b18
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Cleanup CP0 Status initialization
+
+ Add setup_c0_status from Linux. For the moment we disable interrupts, set
+ CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
+ reset-time configuration and will work well across most processors.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Initialize CP0 Cause before setting up CP0 Status register
+
+ Without this change, we'll be suffering from deffered WATCH exception
+ once Status.EXL is cleared. Make sure Cause.WP is cleared.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 26138623230ca2bad3c78e05a65527ea70c8b688
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
+
+ Move things to appropriate place.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Implement flush_cache()
+
+ We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
+ don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
+ function is used not only in U-Boot specfic programs but also at loading
+ target binaries.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Fix I-/D-cache initialization loops
+
+ Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
+ again per a loop for I-cache initialization. But according to 'See MIPS
+ Run', we're encouraged to use three separate loops rather than combining
+ them *for both I- and D-cache*. This patch tries to fix this.
+
+ In accordance with fixing above, mips_init_[id]cache are separated from
+ mips_cache_reset(), and rewrite cache loops are completely rewritten with
+ useful macros.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 1898840797c7f50799377bd5b285a8a93a82c419
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Replace memory clearance code with f_fill64
+
+ This routine fills memory with zero by 64 bytes, and is 64-bit capable.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
+
+ This patch replaces the current function definitions with NESTED, LEAF
+ and END macro. They specify some more additional information about the
+ function; an alignment of symbol, type of symbol, stack frame usage, etc.
+ These information explicitly tells the assembler and the debugger about
+ the types of code we want to generate.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 282223a607c611425fa33f5428f8eae6636972bb
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:43:17 2008 +0900
+
+ [MIPS] asm headers' updates
+
+ Make some asm headers adjusted to the latest Linux kernel.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:39:29 2008 +0900
+
+ [MIPS] Request for the 'mips_cache_lock()' removal
+
+ The initial intension of having mips_cache_lock() was to use the cache
+ as memory for temporary stack use so that a C environment can be set up
+ as early as possible.
+
+ But now mips_cache_lock() follow lowlevel_init(). We've already have the
+ real memory initilaized at this point, therefore we could/should use it.
+ No reason to lock at all.
+
+ Other problems:
+
+ Cache locking is not consistent across MIPS implementaions. Some imple-
+ mentations don't support locking at all. The style of locking varies -
+ some support per line locking, others per way, etc. Some parts use bits
+ in status registers instead of cache ops. Current mips_cache_lock() is
+ not necessarily general-purpose.
+
+ And this is worthy of special mention; once U-Boot/MIPS locks the lines,
+ they are never get unlocked, so the code relies on whatever gets loaded
+ after U-Boot to re-initialize the cache and clear the locks. We're sup-
+ posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
+ but leave the situation as it is for a long time.
+
+ For these reasons, I proposed the removal of mips_cache_lock() from the
+ global start-up code.
+
+ This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
+ *things have changed*. If he wants the same behavior as before, he needs
+ to have CFG_INIT_RAM_LOCK_MIPS in his config file.
+
+ If we don't have any regression report through several releases, then
+ we'll remove codes entirely.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Andrew Dyer <amdyer@gmail.com>
+
+commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:30:54 2008 +0100
+
+ lwmon5 SYSMON POST: fix backlight control
+
+ If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
+ run on the board, then the SYSMON POST controls the display backlight
+ (doesn't switch backlight ON if POST FAILED, and does switch the
+ backlight ON if PASSED).
+
+ If not, then the video driver controls the display backlight (just
+ switch ON the backlight upon initialization).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:29:14 2008 +0100
+
+ lwmon5 SYSMON POST: fix handling of negative temperatures
+
+ Fix errors in the LWMON5 Sysmon POST for negative temperatures.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Mar 7 16:04:25 2008 +0900
+
+ pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
+
+ In current source code, when the device number of PCI is 0, process PCI
+ bridge without fail. However, when the device number is 0, it is not PCI
+ always bridge. There are times when device of PCI allocates.
+
+ When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
+ use this patch.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Mar 21 09:18:40 2008 +0100
+
+ LWMON5: fix dsPIC POST
+
+ Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
+
+commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 20 22:01:38 2008 +0100
+
+ lwmon5 POST: remove unreachable code
+
+ plus some coding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Mar 20 17:56:04 2008 +0300
+
+ LWMON5: POST RTC fix
+
+ Modify the RTC API to provide one a status for the time reported by
+ the rtc_get() function:
+ 0 - a reliable time is guaranteed,
+ < 0 - a reliable time isn't guaranteed (power fault, clock issues,
+ and so on).
+
+ The RTC chip drivers are responsible for providing this info if the
+ corresponding chip supports such functionality. If not - always
+ report that the time is reliable.
+
+ The POST RTC test was modified to detect the RTC faults utilizing
+ this new rtc_get() feature.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Mar 19 14:25:14 2008 +0100
+
+ TQM5200B: update MTD partition layout
+
+ - insert partition for dtb blob to TQM5200B MTD layout
+ - set env variables dependent on the configured board
+ (TQM5200 or TQM5200B)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f0105727d132f56a21fa3ed8b162309cca6cac44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 07:09:26 2008 +0100
+
+ CFI: Small cleanup for FLASH_SHOW_PROGRESS
+
+ With this patch we don't need that many #ifdef's in the code. It moves
+ the subtraction into the macro and defines a NOP-macro when
+ CONFIG_FLASH_SHOW_PROGRESS is not defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a042e9ca512beaaa2cb450274313fc477141241
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 8 13:48:01 2008 -0500
+
+ Flash programming progress countdown.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:09:04 2008 +1100
+
+ libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
+
+ Since fdt_node_offset_by_compatible() was converted to the new
+ fdt_next_node() iterator, a chunk of initialization code became
+ redundant, but was not removed by oversight. This patch cleans it up.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit d0ccb9b140b472039732de102fc14597eedb14df
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:06:31 2008 +1100
+
+ libfdt: Trivial cleanup for CHECK_HEADER)
+
+ Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
+ However, there are a handful of functions (fdt_move, rw_check_header,
+ fdt_open_into) from other files which could also use it (currently
+ they open-code something more-or-less identical). Therefore, this
+ patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
+ places.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fe30a354cdbb808b5f15366a935b151a4ccee74f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 20 14:32:36 2008 -0600
+
+ Fix fdt boardsetup command parsing
+
+ The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 804887e6001e2f00bea11431bf34d6d472512cda
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 03:34:36 2008 -0600
+
+ Add sub-commands to fdt
+
+ fdt header - Display header info
+ fdt bootcpu <id> - Set boot cpuid
+ fdt memory <addr> <size> - Add/Update memory node
+ fdt rsvmem print - Show current mem reserves
+ fdt rsvmem add <addr> <size> - Add a mem reserve
+ fdt rsvmem delete <index> - Delete a mem reserves
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Thu Feb 14 16:50:34 2008 +1100
+
+ libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
+
+ fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
+ node which has NOP tags interspersed with its properties. In this
+ case fdt_add_subnode_namelen() will put the new subnode before the
+ first NOP tag, even if there are properties after it, which will
+ result in an invalid blob.
+
+ This patch fixes the bug, and adds a testcase for it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 11:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Jan 11 14:55:05 2008 +1100
+
+ libfdt: Add fdt_set_name() function
+
+ This patch adds an fdt_set_name() function to libfdt, mirroring
+ fdt_get_name(). This is a r/w function which alters the name of a
+ given device tree node.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 23e20aa6488e6c0622496549861bfdc74108debe
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 46bc0a938779aa1d664b847d36b08aa00f22e539
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switched on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board. These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit c2ed33efbfff5767bca236828e021c55fd547b6c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
+commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 18 17:35:51 2008 +0100
+
+ HMI1001: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f2a9970109cebf7446e0503b10b71f8673045ee
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:32:30 2008 -0500
+
+ Blackfin: BF537-stamp: drop board-specific flash driver for CFI
+
+ The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
+ for the board specific driver at all. Just use the common CFI driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:36:14 2008 -0500
+
+ Blackfin: add proper ELF markings to some assembly functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:35:17 2008 -0500
+
+ Blackfin: new cplbinfo command for viewing cplb tables
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit aadb72503cd1602349a5fe53356d5f55ecc1b900
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:37:51 2008 -0500
+
+ Blackfin: update MAINTAINERS list
+
+ Add maintainer information for the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:26:48 2008 -0500
+
+ Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
+
+ Stop tying things to the processor that should be tied to other defines and
+ change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
+ system to select the -mcpu option.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 86a20fb920bd198105acf7b1191117f566d637ed
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 07:40:36 2008 -0500
+
+ Blackfin: move bootldr command to common code
+
+ This moves the Blackfin-common bootldr command out of the BF537-STAMP
+ specific board directory and into the common directory so that all Blackfin
+ boards may utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit decbe029b2a9d3333d02c433389b1c821eea96d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 14 11:05:20 2008 +0100
+
+ mgcoge: update configuration
+
+ Fix configuration for mgcoge board
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c136724cda0219c49f1d4b346f00da29b14fdf14
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:22:59 2008 +0100
+
+ drivers/rtc/Makefile: keep list sorted
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
+Author: Tor Krill <tor@excito.com>
+Date: Sat Mar 15 15:40:26 2008 +0100
+
+ Add support for Intersil isl1208 RTC
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 0210cff3d079d97b2156b13685ee8de368e68a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 15 17:36:41 2008 +0100
+
+ cramfs: Fix ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:12:58 2008 +0100
+
+ Conding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41712b4e8c95dff23354bcd620e1f9477160c190
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:31:53 2008 +0100
+
+ ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
+
+ This patch adds USB OHCI support to the Canyonlands board port. It also
+ enables EXT2 support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2596f5b9d353ff3e4387a3325d05740f16958038
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:29:32 2008 +0100
+
+ usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
+
+ This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
+ way a board just needs to define this new option to enable the "force
+ NoPowerSwitching mode" instead of adding new CPU/architecture defines
+ to the USB source itself.
+
+ This new option will be used first with the new AMCC 460EX Canyonlands
+ board port, which will be posted in a few days.
+
+ This patch also fixes a small compilation problem when DEBUG is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71665ebf88408ff2acb762af47989fd4365b321a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 3 17:27:02 2008 +0100
+
+ ppc4xx: Add Canyonlands NAND booting support
+
+ 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
+ NAND devices. The only bootstrap option for NAND booting is option F for
+ 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
+ EEPROM needs to be programmed accordingly.
+
+ This patch adds basic NAND booting support for the AMCC Canyonlands aval
+ board and also adds support to the "bootstrap" command, to enable NAND
+ booting I2C setting.
+
+ Tested with 512 byte page NAND device (32MByte) on Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:53:00 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:52:24 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:51:17 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:43 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:18 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 999ecd5aca381984d8ebbeb207ece82a1c275577
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:07:10 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:50 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:26 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 56e410178375d9f20be25fb24e180974f0ae120b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:07:57 2008 +0100
+
+ ppc4xx: interrupt.c reworked
+
+ This patch is a rework of the 4xx interrupt handling done while
+ adding the 460EX/GT support. Interrupts are needed on 4xx for the
+ EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:01:57 2008 +0100
+
+ ppc4xx: program_tlb now uses 64bit physical addess
+
+ This patch changes the physical addess parameter from 32bit to 64bit.
+ This is needed for 36bit 4xx platforms to access areas located
+ beyond the 4GB border, like SoC peripherals (EBC etc.).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3307fa186af85771924c434997089b8104c0a46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 21:58:25 2008 +0100
+
+ ppc4xx: miiphy.c reworked
+
+ While adding the 460EX/GT support I reworked the 4xx miiphy code. It
+ badly neede some cleanup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 16:21:49 2008 +0100
+
+ rtc: Add M41T62 support
+
+ This patch add support for the STM M41T62 RTC. It is used and tested
+ on the AMCC Canyonlands 406EX platform.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 217d383e201adc7f2271145ae345ea5eae2b7170
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:43 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board specific files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:42 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board config file
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit b05f35436b733a240559e77e46bed8439665ecc5
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:41 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board. Global files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:02 2008 +0100
+
+ ppc4xx: HCU4/5. remove obsolete hcu_flash.c
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit a079494853cc2bfeddb26673219db0b4b2b31566
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:01 2008 +0100
+
+ ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
+
+ Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
+ the FLASH_CFI_LEGACY et al. config options.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e4170e5a50c8110f792bc37472833ae669d69951
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 13:52:25 2008 +0100
+
+ ppc4xx: Fix comment in 405EX DDR2 init code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Mar 14 16:04:54 2008 +0100
+
+ tools/setlocalversion: use a git-describe-ish format
+
+ Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
+ where 'nnnnn' is the number of commits since the last tag (i.e.,
+ 1.3.2-rc3). This makes it much easier to recognize "newer" versions
+ and to see how much has been changed since the referenced tag.
+
+ Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6dc21c84de0f159a1752c5ebd33cff843f63609
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:32:03 2008 +0100
+
+ HMI1001: add support for MPC5200 Rev. B processors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:29:49 2008 +0100
+
+ TQM5200: remove dead code
+
+ This board never used a MGT5100 processor.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f1806f60978d707b0cff2d7bf89d141fc24290
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 16:20:02 2008 +0100
+
+ Release v1.3.2
+
+ Update CHANGELOG for release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 9 14:52:11 2008 +0100
+
+ SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit db695b78515ddb88a2d4f3357c120345efbf59ec
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 9 10:44:01 2008 +0100
+
+ scb9328: Fix flash warning: type qualifiers ignored on function return type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:50:41 2008 +0100
+
+ esd/common/fpga.c: fix indentation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cc3843e36453e2b8db65d7e56de938ba045016a0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:33:31 2008 +0100
+
+ common/kgdb.c: fix 'dereferencing type-punned pointer' warning
+
+ and get rid of a couple of unneeded casts.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:09:53 2008 +0100
+
+ esd/common/fpga.c: fix 'assignment of read-only location' error
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6fe4dabac066e8758345d249032768496983a3e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 02:13:19 2008 +0100
+
+ Makefile: make build silently again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 76babc86576f092573599334c85ec543fdbc6015
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 02:07:49 2008 +0100
+
+ m501sk: Fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 00:06:09 2008 +0100
+
+ ADS5121: fix out of tree build
+
+ and simplify Makefile a bit.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 8 22:35:31 2008 +0100
+
+ Release v1.3.2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78a90f827df74520e939c794fc7413dace21c4db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 8 22:35:04 2008 +0100
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 8 21:30:04 2008 +0100
+
+ esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d75469d48c05795144f4b8ba76addbb4920a7bba
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sat Mar 8 09:25:49 2008 +0900
+
+ net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
+
+ When rtl_recv() of rtl8169 is called, OWNbit of status register
+ is not enable occasionally.
+ rtl_recv() doesn't work normally when the driver doesn't do
+ appropriate processing.
+ This patch fix this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 7 08:15:28 2008 +0100
+
+ mgsuvd: update board configuration
+
+ initialize the UPIOx controller.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 7 08:13:41 2008 +0100
+
+ mgcoge: update board configuration
+
+ add support for the config Flash.
+ initialize the UPIOx controller.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 7 12:27:31 2008 -0600
+
+ mpc83xx: make dtb basename file references equal those of linux
+
+ the dts file basenames were updated in linux - this helps avoid
+ inadvertently loading any old dtbs laying around.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 27 16:08:22 2008 -0600
+
+ net: uec_phy: actually increment the timeout counter
+
+ allow u-boot to recover (and, e.g., switch to another interface) in the
+ case where a PHY does not report autonegotiation is complete within its
+ two second timeout value.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 772003e43957ee0c895abed7cd82cbe72820cbb8
+Author: Markus Brunner <super.firetwister@googlemail.com>
+Date: Wed Mar 5 21:38:12 2008 +0100
+
+ fix taihu soft spi_read
+
+ The taihu board used gpio_read_out_bit which reads the output register and not
+ the pin state.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+
+commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 7 08:01:43 2008 +0100
+
+ ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bd4458cb47abecabd406b1210457be96c69fc49d
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Mar 4 16:59:22 2008 +0800
+
+ 837xEMDS: Improve the system performance
+
+ 1. Make the CSB bus pipeline depth as 4, and enable
+ the repeat mode;
+ 2. Raise the eTSEC emergency priority;
+ 3. Use the highest IP blocks clock.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Mar 6 16:45:53 2008 +0100
+
+ Replace "run load; run update" with conditionalized "run load update".
+
+ The latter version stops when "run load" fails for whatever reasons
+ rendering the combination *a lot* more secure.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 6bc113886d7d316df1a4e459bec8baf027518551
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 4 17:40:41 2008 +0100
+
+ net: Print error message upon net usage when no ethernet-interface is found
+
+ This patch fixes a problem seen on PPC4xx boards, when no MAC address is
+ defined. Then no ethernet interface is available but a simple "tftp"
+ command will return without any error message which is quite confusing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a30a549a3553032d809e0356306b62de0b125901
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 4 10:03:03 2008 -0600
+
+ Remove erroneous or extra spd.h #includers.
+
+ Many of the spd.h #includers don't need it,
+ and wanted to have spd_sdram() declared instead.
+ Since they didn't get that, some also had open
+ coded extern declarations of it instead or as well.
+ Fix it all up by using spd_sdram.h where needed.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a4475386cef14af3fd88f0518b688e755669486d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 17:41:28 2008 +0100
+
+ PCS440EP: fix build problems (redundant #define)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 4 17:39:25 2008 +0100
+
+ net: Print error message upon net usage when no ethernet-interface is found
+
+ This patch fixes a problem seen on PPC4xx boards, when no MAC address is
+ defined. Then no ethernet interface is available but a simple "tftp"
+ command will return without any error message which is quite confusing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 17:38:50 2008 +0100
+
+ W7OLMC/W7OLMG: fix build problems (redundant #define)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f9301e1cda296245ba052d7b08321199c3d0af9d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 14:58:31 2008 +0100
+
+ Makefile: fix problem with out-of-tree builds introduced by 5013c09f
+
+ Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
+ problem for out-of-tree builds which caused "make clean" to fail.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dfece9500556bed5d8244b1c15d973cec7c25bfe
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 11:58:26 2008 +0100
+
+ examples/Makefile: build "hello_world" on 8xx, too.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 74eb0222594fd23aafdf168e60e872814eea8b62
+Author: Mike Nuss <mike@terascala.com>
+Date: Mon Mar 3 15:27:05 2008 -0500
+
+ PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
+
+ Every now and then a Sequoia board (or equivalent hardware) had
+ problems connecting to a Gigabit capable network interface.
+
+ There were differences in the PHY setup between Linux and U-Boot.
+
+ This patch fixes the problem. Apparently "remote fault" is being set,
+ which signals to some devices (on the other end of the cable) that a
+ fault has occurred, while other devices ignore it. I believe the RF bit
+ was causing the issue, but I removed T4 also, to match up with Linux.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+
+commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Mar 3 09:58:52 2008 -0600
+
+ fix QE firmware uploading limit
+
+ Fix a typo in qe_upload_firmware() that prevented uploading firmware on
+ systems with more than one RISC core.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
+Author: Bernhard Nemec <bnemec@ganssloser.com>
+Date: Mon Mar 3 11:57:23 2008 +0000
+
+ Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
+
+ Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
+ see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
+
+ Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
+
+commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
+Author: Kim B. Heino <Kim.Heino@bluegiga.com>
+Date: Mon Mar 3 10:39:13 2008 +0200
+
+ fix copy from ram to dataflash
+
+ If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
+ routines instead of dataflash. This is because it checks "if source
+ address is not dataflash" instead of target address.
+
+ Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
+
+commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 3 12:16:44 2008 +0100
+
+ Fix quoting problem (preboot setting) in many board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 3 12:36:49 2008 +0100
+
+ ADS5121: Fix default environment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 2 16:12:31 2008 +0100
+
+ Makefile: Fix missing unconfig and mkconfig use
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
+Author: michael <trimarchi@gandalf.sssup.it>
+Date: Sun Mar 2 23:33:46 2008 +0100
+
+ Fix checking fat32 cluster size.
+
+ This fixes the cluster size tests in the FAT32 file system.
+ The current implementation of VFAT support doesn't work if the
+ referred cluster has an offset > 16bit representation, causing
+ "fatload" and "fatls" commands etc. to fail.
+
+ Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
+
+commit 661bad63a076a96c39c64f136915f146725af92b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 2 22:57:23 2008 +0100
+
+ Prepare v1.3.2-rc2 release candidate
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 76957cb3d621bf664311908e5962e151c633c285
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 1 12:11:40 2008 +0100
+
+ ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
+
+ The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
+ currently 4k/2k is configured. This patch fixes this issue.
+
+ Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 118978c8eb43803e2794233922df4249fa278b83
+Author: Woodruff, Richard <r-woodruff2@ti.com>
+Date: Fri Feb 29 17:34:35 2008 -0600
+
+ Fix alignment error on ARM for modules
+
+ Fix alignment fault on ARM when running modules. With out an explicit
+ linker file gcc4.2.1 will half word align __bss_start's value. The word
+ dereference will crash hello_world.
+
+ signed-off-by Richard Woodruff <r-woodruff2@ti.com>
+
+commit ce1120dd703e6f12c59e4eba9962356a0300b832
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Feb 29 17:45:31 2008 +0800
+
+ fs: Fix ext2 read issue
+
+ The ext2 aligned process will corrupt the key
+ data struct, the patch fix this.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 2 22:45:33 2008 +0100
+
+ Makefile: cleanup "clean" target
+
+ Make sure CDPATH settings cannot interfere.
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit ffda586fc1373243c9794babde69500f6293a8d8
Author: Li Yang <leoli@freescale.com>
Date: Fri Feb 29 11:46:05 2008 +0800
projects / u-boot / blobdiff