+commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 10:40:12 2008 +0100
+
+ README: update documentation (availability, links, etc.)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
+Author: Aras Vaichas <arasv@magtech.com.au>
+Date: Tue Mar 25 12:09:07 2008 +1100
+
+ USB Storage, add meaningful return value
+
+ This patch changes the "usb storage" command to return success if it
+ finds a USB storage device, otherwise it returns error.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 18e69a35efbb078403db0c0063986470dad7d082
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 14 23:20:18 2008 +0300
+
+ 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
+
+ Linux understands "host" (default), "peripheral" and "otg" (broken).
+ Though, U-Boot doesn't restrict dr_mode variable to these values (think
+ of renames in future).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c7604783b236e368f225efb7b3efb418fe20b404
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 14 23:20:30 2008 +0300
+
+ tsec: fix link detection for the RTL8211B PHY
+
+ RTL8211B sets link state register after autonegotiation complete,
+ so with bootdelay=0 RTL8211B will report lack of the link.
+
+ To fix this, we should wait for aneg to complete, even if the
+ link is currently down.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:09 2008 +0300
+
+ mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
+
+ device_type = "soc" is being deprecated, newer device trees will use
+ "fsl,soc" and/or "fsl,immr" for the soc nodes.
+
+ This patch also adds clock-frequency property for soc nodes (the same
+ value as bus-frequency).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
+Author: Joe D'Abbraccio <ljd015@freescale.com>
+Date: Mon Mar 24 13:00:59 2008 -0400
+
+ Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
+
+ With the original value of 1/2 clock cycle delay, the system ran relatively
+ stable except when we run benchmarks that are intensive users of memory.
+ When I run samba connected disk with a HDBENCH test, the system locks-up
+ or reboots sporadically.
+
+ Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
+
+commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Mar 24 12:44:13 2008 -0500
+
+ mpc83xx: Set PCI I/O bus-address base to zero.
+
+ The device trees for these boards describe PCI I/O as starting from
+ address zero from the device's perspective.
+
+ Placing I/O elsewhere may cause problems with certain PCI boards, and may
+ cause problems with Linux.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:05 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
+
+ At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
+ This patch fixes "system time drifting" problem.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:02 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
+
+ This is needed to update /choosen/linux,stdout-path properly.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:00 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: add dhcp command
+
+ Plus modify environment to use it and remove bootfile env variable,
+ it is internal and CONFIG_BOOTFILE is used for these purposes.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:57 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
+
+ Current DDR setup easily causes memory corruption, this patch fixes it.
+
+ Also fix TIMING_CFG0_MRS_CYC definition.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:53 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
+
+ This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
+ controller and FHCI (QE USB).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 7ad959490962e6842648d87d4bd795ea6cdcce67
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:51 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: add support for NAND
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 9a3e832aeb491861d029991241572ebdf4b5b61b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:46 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
+
+ This is needed for BCM PHYs to work on this board.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:34 2008 +0300
+
+ uec: add support for Broadcom BCM5481 Gigabit PHY
+
+ This patch adds basic support for Broadcom BCM5481 PHY.
+
+ RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
+ Peter Barada <peterb@logicpd.com>.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 6a600c3a1876bc203445df4f0fd6b12648259666
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:28 2008 +0300
+
+ uec: add support for RGMII_RXID interface mode
+
+ PHY drivers will use it to setup software delay between RXD and RXC
+ signals.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:24 2008 +0300
+
+ uec: add support for gbit mii status readings
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:47 2008 +0300
+
+ 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
+
+ This is primarily for the early console support.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:43 2008 +0300
+
+ 83xx: initialize serdes for MPC837XRDB boards
+
+ On the MPC8377ERDB: 2 SATA and 2 PCI-E.
+ On the MPC8378ERDB: 2 PCI-E
+ On the MPC8379ERDB: 4 SATA
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 453316a2a19642d8afcbca7452e40a6b44a197b1
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:32 2008 +0300
+
+ 83xx: serdes setup routines
+
+ This patch adds few routines to configure serdes on 837x targets.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:27 2008 +0300
+
+ 83xx: split COBJS onto separate lines
+
+ ..plus get rid of some #ifdefs in the .c files.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:23 2008 +0300
+
+ 83xx: nand support for MPC837XRDB boards
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 82e45a204190593e8613145a928f998fb8c909c4
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Tue Mar 18 21:44:41 2008 -0400
+
+ Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0fa7a1b4719e325fce332689fb8754ec166191ff
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:39 2008 -0400
+
+ mpc8323erdb: remove RTC and add EEPROM
+
+ There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:34 2008 -0400
+
+ mpc8323erdb: Improve the system performance
+
+ The following changes are based on kernel UCC ethernet performance:
+
+ 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
+ 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
+ switch to enable this setting.
+
+ The following changes are based on the App Note AN3369 and
+ verified to improve memory latency using LMbench:
+
+ 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
+ 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
+ previously.
+ 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
+ Twr=15ns, and this was already the setting in DDR_MODE)
+ 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
+ Trp=15ns)
+ 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
+ Tras=40ns)
+ 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
+ Trcd=15ns)
+ 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
+ Trfc=75ns)
+ 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
+ on Tfaw=50ns)
+ 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
+ on CL=3 and WL=2).
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fc549c871f43933396a5b3e21d897023d4b31b8d
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:28 2008 -0400
+
+ mpc8323erdb: use readable DDR config macros
+
+ Use available shift/mask macros to define DDR configuration.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 89c7784ed90ba50301eec521144f95111e472906
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Feb 8 13:15:55 2008 -0600
+
+ 83xx: Add Vitesse VSC7385 firmware uploading
+
+ Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
+ the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
+ Cleaned up the board header files to make selecting the VSC7385 easier to
+ control.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Feb 8 13:15:54 2008 -0600
+
+ NET: Add Vitesse VSC7385 firmware uploading
+
+ The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
+ and other boards. A small firwmare must be uploaded to its on-board memory
+ before it can be enabled. This patch adds the code which uploads firmware
+ (but not the firmware itself).
+
+ Previously, this feature was provided by a U-Boot application that was
+ made available only on Freescale BSPs. The VSC7385 firmware must still
+ be obtained separately, but at least there is no longer a need for a separate
+ application.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 00:52:10 2008 +0100
+
+ Coding Style cleanyp; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 43ddd9c820fec44816188f53346b464e20b3142d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 22 14:23:49 2008 -0400
+
+ Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
+
+ These defines embedded the u-boot env variables and/or the bd_t structure
+ in the fdt blob. The conclusion of discussion on the u-boot email list
+ was that embedding these in the fdt blob is not useful: there are better
+ ways of passing the data (in fact, the fdt blob itself replaces the
+ bd_t struct).
+
+ The only board that enables these is the stxxtc and they don't appear
+ to be used by linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 22ed2285743359fd1fe73e411dff914b2256e68f
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 17 10:49:25 2008 +0100
+
+ rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 17 08:54:06 2008 +0900
+
+ Add Flex-OneNAND booting support
+
+ Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
+ using a NOR Flash interface. This on-chip integration enables system designers
+ to reduce external system logic and use high-density NAND Flash
+ in applications that would otherwise have to use more NOR components.
+
+ Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
+ in more flexible way. While MLC area of Flex-OneNAND can be used to store data
+ that require low reliability and high density, SLC area of Flex-OneNAND
+ to store data that need high reliability and high performance. Flex-OneNAND
+ can let users take advantage of storing these two different types of data
+ into one chip, which is making Flex-OneNAND more cost- and space-effective.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c512389cc4a10253249271ff6c887c6dab1f0db2
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 13 13:50:52 2008 +0100
+
+ MPC5200: support setup without FEC
+
+ Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
+ defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit aa3511e422946041ef626f80a05ae5e8bfc700e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:46 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f1d846e5c5754449c286587d099d85246062772
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:47 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:45 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:33 2008 +0900
+
+ net: Add support AX88796L ethernet device
+
+ AX88796L is device of NE2000 compatible.
+ This patch support AX88796L ethernet device.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e0a6140dd381e1eed1ada2291166ef2616d8822b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 25 22:50:41 2008 +0100
+
+ ne2000 driver: change #ifdef to Makefile conditional compilation
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e710185aae90c64d39c2d453e40e58ceefe4f250
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:20 2008 +0900
+
+ net: Divided code of NE2000 ethernet driver
+
+ There are more devices of the NE2000 base.
+ A present code is difficult for us to support more devices.
+ To support more NE2000 clone devices, separated the function.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 395bce4f59a507a60a475f7ee46bed47de9482df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:58:13 2008 -0500
+
+ net/Blackfin: move on-chip MAC driver into drivers/net/
+
+ The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
+ directory, but it is not board specific, so relocate it to the drivers dir
+ so that other Blackfin ports can utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:52:35 2008 -0500
+
+ smc91111: use SSYNC() rather than asm(ssync) for Blackfin
+
+ Since the "ssync" instruction may have hardware anomalies associated with
+ it, have the smc91111 driver use the SSYNC macro rather than invoking it
+ directly. We workaround all the anomalies via this macro.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Sun Feb 17 22:57:47 2008 +0000
+
+ 8xx: Update OF support on 8xx
+
+ This patch does some shifting around of OF support on 8xx.
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit 9c666a7db0b2285a270c68810889ce7d5dba304b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 15:16:18 2008 -0600
+
+ ppc: Allow boards to specify how much memory they can map
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capble of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Fri Feb 15 01:05:58 2008 +0000
+
+ 8xx : Add OF support to Adder875 board port - resubmit
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 20:44:42 2008 -0600
+
+ Add setexpr command
+
+ Add a simple expr style command that will set an env variable as the result
+ of the command. This allows us to do simple math in shell. The following
+ operations are supported: &, |, ^, +, -, *, /.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f105faa64b9826e088711fdfcaa70cb1230397a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:27:48 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 449c703374a8868453425e15da7e2f76221b72e4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:21:43 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5863577989ad689427bb750107e9a75f1c1645d2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 16:41:41 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8a773983957ee6c4aa344469b742f29c7d26afbd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:08 2008 +0900
+
+ [MIPS] Move gth2_config from ARM section to MIPS
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Fix dcache_status()
+
+ You can't judge UNCACHED by Config.K0 LSB.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Introduce _machine_restart
+
+ Handles machine specific functions by using weak functions.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit decaba6f5cf386d569ac3997bebb871b966c6b18
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Cleanup CP0 Status initialization
+
+ Add setup_c0_status from Linux. For the moment we disable interrupts, set
+ CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
+ reset-time configuration and will work well across most processors.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Initialize CP0 Cause before setting up CP0 Status register
+
+ Without this change, we'll be suffering from deffered WATCH exception
+ once Status.EXL is cleared. Make sure Cause.WP is cleared.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 26138623230ca2bad3c78e05a65527ea70c8b688
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
+
+ Move things to appropriate place.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Implement flush_cache()
+
+ We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
+ don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
+ function is used not only in U-Boot specfic programs but also at loading
+ target binaries.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Fix I-/D-cache initialization loops
+
+ Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
+ again per a loop for I-cache initialization. But according to 'See MIPS
+ Run', we're encouraged to use three separate loops rather than combining
+ them *for both I- and D-cache*. This patch tries to fix this.
+
+ In accordance with fixing above, mips_init_[id]cache are separated from
+ mips_cache_reset(), and rewrite cache loops are completely rewritten with
+ useful macros.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 1898840797c7f50799377bd5b285a8a93a82c419
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Replace memory clearance code with f_fill64
+
+ This routine fills memory with zero by 64 bytes, and is 64-bit capable.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
+
+ This patch replaces the current function definitions with NESTED, LEAF
+ and END macro. They specify some more additional information about the
+ function; an alignment of symbol, type of symbol, stack frame usage, etc.
+ These information explicitly tells the assembler and the debugger about
+ the types of code we want to generate.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 282223a607c611425fa33f5428f8eae6636972bb
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:43:17 2008 +0900
+
+ [MIPS] asm headers' updates
+
+ Make some asm headers adjusted to the latest Linux kernel.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:39:29 2008 +0900
+
+ [MIPS] Request for the 'mips_cache_lock()' removal
+
+ The initial intension of having mips_cache_lock() was to use the cache
+ as memory for temporary stack use so that a C environment can be set up
+ as early as possible.
+
+ But now mips_cache_lock() follow lowlevel_init(). We've already have the
+ real memory initilaized at this point, therefore we could/should use it.
+ No reason to lock at all.
+
+ Other problems:
+
+ Cache locking is not consistent across MIPS implementaions. Some imple-
+ mentations don't support locking at all. The style of locking varies -
+ some support per line locking, others per way, etc. Some parts use bits
+ in status registers instead of cache ops. Current mips_cache_lock() is
+ not necessarily general-purpose.
+
+ And this is worthy of special mention; once U-Boot/MIPS locks the lines,
+ they are never get unlocked, so the code relies on whatever gets loaded
+ after U-Boot to re-initialize the cache and clear the locks. We're sup-
+ posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
+ but leave the situation as it is for a long time.
+
+ For these reasons, I proposed the removal of mips_cache_lock() from the
+ global start-up code.
+
+ This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
+ *things have changed*. If he wants the same behavior as before, he needs
+ to have CFG_INIT_RAM_LOCK_MIPS in his config file.
+
+ If we don't have any regression report through several releases, then
+ we'll remove codes entirely.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Andrew Dyer <amdyer@gmail.com>
+
+commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:30:54 2008 +0100
+
+ lwmon5 SYSMON POST: fix backlight control
+
+ If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
+ run on the board, then the SYSMON POST controls the display backlight
+ (doesn't switch backlight ON if POST FAILED, and does switch the
+ backlight ON if PASSED).
+
+ If not, then the video driver controls the display backlight (just
+ switch ON the backlight upon initialization).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:29:14 2008 +0100
+
+ lwmon5 SYSMON POST: fix handling of negative temperatures
+
+ Fix errors in the LWMON5 Sysmon POST for negative temperatures.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Mar 7 16:04:25 2008 +0900
+
+ pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
+
+ In current source code, when the device number of PCI is 0, process PCI
+ bridge without fail. However, when the device number is 0, it is not PCI
+ always bridge. There are times when device of PCI allocates.
+
+ When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
+ use this patch.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Mar 21 09:18:40 2008 +0100
+
+ LWMON5: fix dsPIC POST
+
+ Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
+
+commit 388b82fddc7c05596f3f615f190da0448227dc82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:23:13 2008 +0100
+
+ [new uImage] Enable new uImage support for the pcs440ep board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:23:13 2008 +0100
+
+ [new uImage] Do not compile new uImage format support by default
+
+ Disable default building of new uImage format support in preparation
+ for merge with the master. Support for new format can be enabled on
+ a per-board basis, by defining the following in the board's config file:
+
+ #define CONFIG_FIT 1
+ #define CONFIG_OF_LIBFDT 1
+
+ This can be optionally defined to give more verbose output:
+
+ #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit dafaede8a46c7159310239e036c93e31c6374487
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:20:31 2008 +0100
+
+ [new uImage] Disable debuging output in preparation for merge with master
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit fbe7a155027beacebaee9b32e1ada781fe924bca
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 19:38:45 2008 +0100
+
+ [new uImage] Compilation and new uImage handling fixes for imxtract
+
+ Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
+ include/config_cmd_default.h. Fix few warnings and handling of new format
+ images.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 36cc8cbb3379d5166f882641123521735c469f92
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:10:19 2008 +0100
+
+ [new uImage] Fix autoscr command used with new uImage format
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 43142e817f0597be412e7cbe19413f5532eafa5d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:10:19 2008 +0100
+
+ [new uImage] Fix *.its files location in documentation
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 20 22:01:38 2008 +0100
+
+ lwmon5 POST: remove unreachable code
+
+ plus some coding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Mar 20 17:56:04 2008 +0300
+
+ LWMON5: POST RTC fix
+
+ Modify the RTC API to provide one a status for the time reported by
+ the rtc_get() function:
+ 0 - a reliable time is guaranteed,
+ < 0 - a reliable time isn't guaranteed (power fault, clock issues,
+ and so on).
+
+ The RTC chip drivers are responsible for providing this info if the
+ corresponding chip supports such functionality. If not - always
+ report that the time is reliable.
+
+ The POST RTC test was modified to detect the RTC faults utilizing
+ this new rtc_get() feature.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Mar 19 14:25:14 2008 +0100
+
+ TQM5200B: update MTD partition layout
+
+ - insert partition for dtb blob to TQM5200B MTD layout
+ - set env variables dependent on the configured board
+ (TQM5200 or TQM5200B)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f0105727d132f56a21fa3ed8b162309cca6cac44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 07:09:26 2008 +0100
+
+ CFI: Small cleanup for FLASH_SHOW_PROGRESS
+
+ With this patch we don't need that many #ifdef's in the code. It moves
+ the subtraction into the macro and defines a NOP-macro when
+ CONFIG_FLASH_SHOW_PROGRESS is not defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a042e9ca512beaaa2cb450274313fc477141241
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 8 13:48:01 2008 -0500
+
+ Flash programming progress countdown.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Mar 19 10:00:06 2008 +0100
+
+ [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:09:04 2008 +1100
+
+ libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
+
+ Since fdt_node_offset_by_compatible() was converted to the new
+ fdt_next_node() iterator, a chunk of initialization code became
+ redundant, but was not removed by oversight. This patch cleans it up.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit d0ccb9b140b472039732de102fc14597eedb14df
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:06:31 2008 +1100
+
+ libfdt: Trivial cleanup for CHECK_HEADER)
+
+ Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
+ However, there are a handful of functions (fdt_move, rw_check_header,
+ fdt_open_into) from other files which could also use it (currently
+ they open-code something more-or-less identical). Therefore, this
+ patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
+ places.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fe30a354cdbb808b5f15366a935b151a4ccee74f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 20 14:32:36 2008 -0600
+
+ Fix fdt boardsetup command parsing
+
+ The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 804887e6001e2f00bea11431bf34d6d472512cda
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 03:34:36 2008 -0600
+
+ Add sub-commands to fdt
+
+ fdt header - Display header info
+ fdt bootcpu <id> - Set boot cpuid
+ fdt memory <addr> <size> - Add/Update memory node
+ fdt rsvmem print - Show current mem reserves
+ fdt rsvmem add <addr> <size> - Add a mem reserve
+ fdt rsvmem delete <index> - Delete a mem reserves
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Thu Feb 14 16:50:34 2008 +1100
+
+ libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
+
+ fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
+ node which has NOP tags interspersed with its properties. In this
+ case fdt_add_subnode_namelen() will put the new subnode before the
+ first NOP tag, even if there are properties after it, which will
+ result in an invalid blob.
+
+ This patch fixes the bug, and adds a testcase for it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 11:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Jan 11 14:55:05 2008 +1100
+
+ libfdt: Add fdt_set_name() function
+
+ This patch adds an fdt_set_name() function to libfdt, mirroring
+ fdt_get_name(). This is a r/w function which alters the name of a
+ given device tree node.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 23e20aa6488e6c0622496549861bfdc74108debe
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 46bc0a938779aa1d664b847d36b08aa00f22e539
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switched on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board. These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit c2ed33efbfff5767bca236828e021c55fd547b6c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
+commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 18 17:35:51 2008 +0100
+
+ HMI1001: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f2a9970109cebf7446e0503b10b71f8673045ee
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:32:30 2008 -0500
+
+ Blackfin: BF537-stamp: drop board-specific flash driver for CFI
+
+ The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
+ for the board specific driver at all. Just use the common CFI driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:36:14 2008 -0500
+
+ Blackfin: add proper ELF markings to some assembly functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:35:17 2008 -0500
+
+ Blackfin: new cplbinfo command for viewing cplb tables
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit aadb72503cd1602349a5fe53356d5f55ecc1b900
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:37:51 2008 -0500
+
+ Blackfin: update MAINTAINERS list
+
+ Add maintainer information for the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:26:48 2008 -0500
+
+ Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
+
+ Stop tying things to the processor that should be tied to other defines and
+ change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
+ system to select the -mcpu option.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 86a20fb920bd198105acf7b1191117f566d637ed
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 07:40:36 2008 -0500
+
+ Blackfin: move bootldr command to common code
+
+ This moves the Blackfin-common bootldr command out of the BF537-STAMP
+ specific board directory and into the common directory so that all Blackfin
+ boards may utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit decbe029b2a9d3333d02c433389b1c821eea96d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 14 11:05:20 2008 +0100
+
+ mgcoge: update configuration
+
+ Fix configuration for mgcoge board
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c136724cda0219c49f1d4b346f00da29b14fdf14
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:22:59 2008 +0100
+
+ drivers/rtc/Makefile: keep list sorted
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
+Author: Tor Krill <tor@excito.com>
+Date: Sat Mar 15 15:40:26 2008 +0100
+
+ Add support for Intersil isl1208 RTC
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 0210cff3d079d97b2156b13685ee8de368e68a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 15 17:36:41 2008 +0100
+
+ cramfs: Fix ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:12:58 2008 +0100
+
+ Conding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41712b4e8c95dff23354bcd620e1f9477160c190
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:31:53 2008 +0100
+
+ ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
+
+ This patch adds USB OHCI support to the Canyonlands board port. It also
+ enables EXT2 support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2596f5b9d353ff3e4387a3325d05740f16958038
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:29:32 2008 +0100
+
+ usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
+
+ This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
+ way a board just needs to define this new option to enable the "force
+ NoPowerSwitching mode" instead of adding new CPU/architecture defines
+ to the USB source itself.
+
+ This new option will be used first with the new AMCC 460EX Canyonlands
+ board port, which will be posted in a few days.
+
+ This patch also fixes a small compilation problem when DEBUG is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71665ebf88408ff2acb762af47989fd4365b321a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 3 17:27:02 2008 +0100
+
+ ppc4xx: Add Canyonlands NAND booting support
+
+ 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
+ NAND devices. The only bootstrap option for NAND booting is option F for
+ 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
+ EEPROM needs to be programmed accordingly.
+
+ This patch adds basic NAND booting support for the AMCC Canyonlands aval
+ board and also adds support to the "bootstrap" command, to enable NAND
+ booting I2C setting.
+
+ Tested with 512 byte page NAND device (32MByte) on Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:53:00 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:52:24 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:51:17 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:43 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:18 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 999ecd5aca381984d8ebbeb207ece82a1c275577
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:07:10 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:50 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:26 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 56e410178375d9f20be25fb24e180974f0ae120b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:07:57 2008 +0100
+
+ ppc4xx: interrupt.c reworked
+
+ This patch is a rework of the 4xx interrupt handling done while
+ adding the 460EX/GT support. Interrupts are needed on 4xx for the
+ EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:01:57 2008 +0100
+
+ ppc4xx: program_tlb now uses 64bit physical addess
+
+ This patch changes the physical addess parameter from 32bit to 64bit.
+ This is needed for 36bit 4xx platforms to access areas located
+ beyond the 4GB border, like SoC peripherals (EBC etc.).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3307fa186af85771924c434997089b8104c0a46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 21:58:25 2008 +0100
+
+ ppc4xx: miiphy.c reworked
+
+ While adding the 460EX/GT support I reworked the 4xx miiphy code. It
+ badly neede some cleanup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 16:21:49 2008 +0100
+
+ rtc: Add M41T62 support
+
+ This patch add support for the STM M41T62 RTC. It is used and tested
+ on the AMCC Canyonlands 406EX platform.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 217d383e201adc7f2271145ae345ea5eae2b7170
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:43 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board specific files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:42 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board config file
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit b05f35436b733a240559e77e46bed8439665ecc5
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:41 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board. Global files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:02 2008 +0100
+
+ ppc4xx: HCU4/5. remove obsolete hcu_flash.c
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit a079494853cc2bfeddb26673219db0b4b2b31566
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:01 2008 +0100
+
+ ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
+
+ Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
+ the FLASH_CFI_LEGACY et al. config options.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e4170e5a50c8110f792bc37472833ae669d69951
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 13:52:25 2008 +0100
+
+ ppc4xx: Fix comment in 405EX DDR2 init code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Mar 14 16:22:34 2008 +0100
+
+ Add MD5 support to the new uImage format
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 0ede0c383530a418cf98be9122371a86573cd0db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Mar 14 16:22:34 2008 +0100
+
+ Add the MD5 algorithm
+
+ MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
+ calculated using the md5() function -- see include/md5.h for details.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Mar 14 16:04:54 2008 +0100
+
+ tools/setlocalversion: use a git-describe-ish format
+
+ Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
+ where 'nnnnn' is the number of commits since the last tag (i.e.,
+ 1.3.2-rc3). This makes it much easier to recognize "newer" versions
+ and to see how much has been changed since the referenced tag.
+
+ Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6dc21c84de0f159a1752c5ebd33cff843f63609
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:32:03 2008 +0100
+
+ HMI1001: add support for MPC5200 Rev. B processors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:29:49 2008 +0100
+
+ TQM5200: remove dead code
+
+ This board never used a MGT5100 processor.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 12:14:15 2008 +0100
+
+ [new uImage] Fix build issue on ARM
+
+ ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3310c549a73a949430bfda90876df7552a1dab0c
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 12:13:13 2008 +0100
+
+ [new uImage] Add new uImage format documentation and examples
+
+ Create doc/uImage.FIT documentation directory with the following files:
+ - command_syntax_extensions.txt : extended command syntax description
+ - howto.txt : short usage howto
+ - source_file_format.txt : internal new uImage format description
+
+ Add example image source files:
+ - kernel.its
+ - kernel_fdt.its
+ - multi.its
+
+ Update README appropriately.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1ec73761d2e247078f4520a265d463e8b73391a2
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:52 2008 +0100
+
+ [new uImage] Fix definition of common bootm_headers_t fields
+
+ verify, autostart and lmb fields are used regardless of CONFIG_FIT
+ setting, move their definitions to common section.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1d1cb4270edc6a99276834064069717f9782c491
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:51 2008 +0100
+
+ [new uImage] Fix build problems on trab board
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f773bea8e11f4a11c388dcee956b2444203e6b65
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:46 2008 +0100
+
+ [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
+
+ Save FIT configuration provied in the first bootm argument and use it
+ when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
+ arguments are not specified.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] More verbose kernel image uncompress error message
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Use show_boot_progress() for new uImage format
+
+ This patch allocates a set of show_boot_progress() IDs for new uImage format
+ and adds show_boot_progress() calls in new uImage format handling code.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Add new uImage fromat support to fpga command
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Add new uImage format handling to other bootm related commands
+
+ Updated commands:
+
+ docboot - cmd_doc.c
+ fdcboot - cmd_fdc.c
+ diskboot - cmd_ide.c
+ nboot - cmd_nand.c
+ scsiboot - cmd_scsi.c
+ usbboot - cmd_usb.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to imgextract command
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to autoscript routine
+
+ autoscript() routine is updated to accept second argument, which
+ is only used for FIT images and provides a FIT subimage unit name.
+
+ autoscript() routine callers must now pass two arguments. For
+ non-interactive use (like in cmd_load.c, cmd_net.c), new environment
+ variable 'autoscript_uname' is introduced and used as a FIT
+ subimage unit name source.
+
+ autoscript command accepts extended syntax of the addr argument:
+ addr:<subimg_uname>
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit cd7c596e9f561dbbc17b717277438aee78cde14f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
+
+ This patch updates architecture specific implementations of
+ do_bootm_linux() adding new uImage format handling for
+ operations like get kernel entry point address, get kernel
+ image data start address.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 3dfe110149311425919e6d6a14b561b4207498f1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:32:59 2008 +0100
+
+ [new uImage] Add node offsets for FIT images listed in struct bootm_headers
+
+ This patch adds new node offset fields to struct bootm_headers
+ and updates bootm_headers processing code to make use of them.
+ Saved node offsets allow to avoid repeating fit_image_get_node() calls.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit bc8ed486b125452ba3bd8344f052f437329150c5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:32:53 2008 +0100
+
+ [new uImage] ppc: Add new uImage format support to FDT handling routines
+
+ Support for new (FIT) format uImages is added to powerpc specific
+ boot_get_fdt() routine which now recognizes, sanity checks FIT image
+ and is able to access data sections of the requested component image.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit a44a269a905f924b420020506a4d7d7eedcc0eaf
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:14:57 2008 +0100
+
+ [new uImage] Re-enable interrupts for non automatic booting
+
+ Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
+ environment variable is not set to 'yes'.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d985c8498c4e47095820da97aa722381d39172c5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:14:38 2008 +0100
+
+ [new uImage] Remove unnecessary arguments passed to ramdisk routines
+
+ boot_get_ramdisk() and image_get_ramdisk() do not need all
+ cmdtp, flag, argc and argv arguments. Simplify routines definition.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c87796483bc7c2900470dc747c367f602577608d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:12:37 2008 +0100
+
+ [new uImage] Add new uImage format support for ramdisk handling
+
+ This patch updates boot_get_ramdisk() routine adding format
+ verification and handling for new (FIT) uImages.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:01:05 2008 +0100
+
+ [new uImage] Add new uImage format support for kernel booting
+
+ New format uImages are recognized by the bootm command,
+ validity of specified kernel component image is checked and
+ its data section located and used for further processing
+ (uncompress, load, etc.)
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Mar 11 12:35:20 2008 +0100
+
+ [new uImage] Add new uImage format support for imls and iminfo commands
+
+ imls and iminfo can now recognize nad print out contents of the new (FIT)
+ format uImages.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Mar 11 12:34:47 2008 +0100
+
+ [new uImage] Add support for new uImage format to mkimage tool
+
+ Support for the new uImage format (FIT) is added to mkimage tool.
+ Commandline syntax is appropriately extended:
+
+ mkimage [-D dtc_options] -f fit-image.its fit-image
+
+ mkimage (together with dtc) takes fit-image.its and referenced therein
+ binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
+ final image that can be transferred to the target (e.g., via tftp) and then
+ booted using the bootm command in U-Boot.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eb6175edd6c120d8b89678243e5a2be362ee8e40
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Mar 10 17:53:49 2008 +0100
+
+ [new uImage] Make node unit names const in struct bootm_headers
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 21:24:06 2008 +0100
+
+ [new uImage] New uImage low-level API
+
+ Add FDT-based functions for handling new format component images,
+ configurations, node operations, property get/set, etc.
+
+ fit_ - routines handling global new format uImage operations
+ like get/set top level property, process all nodes, etc.
+ fit_image_ - routines handling component images subnodes
+ fit_conf_ - routines handling configurations node
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 30f1806f60978d707b0cff2d7bf89d141fc24290
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 16:20:02 2008 +0100
+
+ Release v1.3.2
+
+ Update CHANGELOG for release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun Mar 9 14:52:11 2008 +0100
actua1/actua2/actua3: Fix multiple unused variable warnings
- - actua1:
- actux1.c: In function 'checkboard':
- actux1.c:92: warning: unused variable 'revision'
+ - actua1:
+ actux1.c: In function 'checkboard':
+ actux1.c:92: warning: unused variable 'revision'
+
+ - actua2:
+ actux2.c: In function 'checkboard':
+ actux2.c:100: warning: unused variable 's'
+ actux2.c:99: warning: unused variable 'revision'
+ actux2.c: In function 'reset_phy':
+ actux2.c:130: warning: unused variable 'i'
+
+ - actua3:
+ actux3.c: In function 'checkboard':
+ actux3.c:114: warning: unused variable 'revision'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Feb 24 11:44:29 2008 +0900
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+
+ The previous patch was lacking of i386, microblaze, nios and nios2. This
+ patch tries to fix them.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 22:22:46 2008 +0100
+
+ [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
+
+ Do not use global fdt blob pointer, calculate blob size from routine
+ argument blob pointer.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d1cc52879c8966507dad9fb575481e6d3985e64e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 00:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 8cf30809a82902a471866d2f07725ce3b8a22291
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 29 16:00:24 2008 +0100
+
+ [new uImage] Add libfdt support to mkimage
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 29 16:00:23 2008 +0100
+
+ [new uImage] Add sha1.o object to mkimage binary build
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit df6f1b895c997978f03afe04502ee76b7ba34ab9
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 16:00:06 2008 +0100
+
+ [new uImage] Fix component handling for legacy multi component images
+
+ Use uint32_t when accessing size table in image_multi_count() and
+ image_multi_getimg() for multi component images.
+
+ Add missing uimage_to_cpu() endianness conversion.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 15:59:59 2008 +0100
+
+ [new uImage] Share common uImage code between mkimage and U-boot
+
+ This patch adds the following common routines:
+
+ 1) Dedicated mkimage print_header() is replaced with common
+ image_print_contents()
+ image_print_contents_noindent()
+
+ 2) Common os/arch/type/comp fields name <--> id translation routines
+ genimg_get_os_name()
+ genimg_get_arch_name()
+ genimg_get_type_name()
+ genimg_get_comp_name()
+ genimg_get_os_id()
+ genimg_get_arch_id()
+ genimg_get_type_id()
+ genimg_get_comp_id()
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 14:58:34 2008 +0100
+
+ [new uImage] Update naming convention for bootm/uImage related code
+
+ This patch introduces the following prefix convention for the
+ image format handling and bootm related code:
+
+ genimg_ - dual format shared code
+ image_ - legacy uImage format specific code
+ fit_ - new uImage format specific code
+ boot_ - booting process related code
+
+ Related routines are renamed and a few pieces of code are moved around and
+ re-grouped.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:51 2008 -0600
+
+ [new uImage] Respect autostart setting in linux bootm
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:50 2008 -0600
+
+ [new uImage] Provide ability to restrict region used for boot images
+
+ Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
+ to restrict what memory range is used for bootm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:49 2008 -0600
+
+ [new uImage] Use lmb for bootm allocations
+
+ Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
+ functions over to using lmb for allocation of the ramdisk, command line
+ and kernel bd info.
+
+ Convert PPC specific fdt_relocate() to use lmb for allocation of the device
+ tree.
+
+ Provided a weak function that board code can call to do additional
+ lmb reserves if needed.
+
+ Also introduce the concept of bootmap_base to specify the offset in
+ physical memory that the bootmap is located at. This is used for
+ allocations of the cmdline, kernel bd, and device tree as they should
+ be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f5614e7926863bf0225ec860d9b319741a9c4004
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:48 2008 -0600
+
+ [new uImage] Add autostart flag to bootm_headers structure
+
+ The autostart env variable was dropped as part of the initial new uImage
+ cleanup. Add it back here so the arch specific code can decide if it
+ wants to really boot or not.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:47 2008 -0600
+
+ [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
+
+ Introduce the LMB lib used on PPC in the kernel as a clean way to manage
+ the memory spaces used by various boot images and structures. This code
+ will allow us to simplify the code in bootm and its support functions.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 19 22:03:47 2008 -0600
+
+ [new uImage] ppc: Allow boards to specify effective amount of memory
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capable of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:46 2008 -0600
+
+ [new uImage] rework error handling so common functions don't reset
+
+ Changed image_get_ramdisk() to just return NULL on error and have
+ get_ramdisk() propogate that error to the caller. It's left to the
+ caller to call do_reset() if it wants to.
+
+ Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
+ to a common location. In the future we will change get_fdt() and
+ fdt_relocate() to return success/failure and not call do_reset() at all.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d2bc095a639672def11d5d043b5688d0dbd692ec
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:45 2008 -0600
+
+ [new uImage] ppc: Re-order ramdisk/fdt handling sequence
+
+ Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
+ however it does mean we have to go in and fixup the initrd info since
+ we don't know where it will be.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 27953493ef025fb698d68c5dee39b36f01f4d530
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:44 2008 -0600
- - actua2:
- actux2.c: In function 'checkboard':
- actux2.c:100: warning: unused variable 's'
- actux2.c:99: warning: unused variable 'revision'
- actux2.c: In function 'reset_phy':
- actux2.c:130: warning: unused variable 'i'
+ [new uImage] ppc: Determine if we are booting an OF style
- - actua3:
- actux3.c: In function 'checkboard':
- actux3.c:114: warning: unused variable 'revision'
+ If we are bootin OF style than we can skip setting up some things
+ that are used for the old boot method.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
-commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sun Feb 24 11:44:29 2008 +0900
+commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:43 2008 -0600
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+ [new uImage] Don't pass kdb to ramdisk_high since we may not have one
- The previous patch was lacking of i386, microblaze, nios and nios2. This
- patch tries to fix them.
+ We don't actually need the kdb param as we are just using it to get
+ bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
+ boot via OF we might not actually fill out a kdb.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
Author: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit 4efbe9dbb129f857f27856936112c8c02f016be6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:26 2008 +0100
+
+ [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
+
+ Dual format image code must properly handle all three FDT passing methods:
+ - raw FDT blob passed
+ - FDT blob embedded in the legacy uImage
+ - FDT blob embedded in the new uImage
+
+ This patch enables proper raw FDT handling when no FIT imaeg support
+ is compiled in. This is a bit tricky as we must dected FIT format even
+ when FIT uImage handling is not enabled as both FIT uImages and raw FDT
+ blobs use tha same low level format (libfdt).
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:26 2008 +0100
+
+ [new uImage] POWERPC: Add image_get_fdt() routine
+
+ FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
+ (3) or embedded in the new uImage. For the (2) case embedding image must be
+ verified before we get FDT from it. This patch factors out legacy image
+ specific verification routine to the separate helper routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1efd43601f90de21ec6c0ebb9880823e822927b1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:07 2008 +0100
+
+ [new uImage] Add image_get_kernel() routine
+
+ Legacy image specific verification is factored out to a separate helper
+ routine to keep get_kernel() generic and simple.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:01:04 2008 +0100
+
+ [new uImage] Move image verify flag to bootm_headers structure
+
+ Do not pass image verification flag directly to related routines.
+ Simplify argument passing and move it to the bootm_header structure which
+ contains curently processed image specific data and is already being passed
+ on the argument list.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 823afe7cefe00dafefc6696c1cc7aa828c394234
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:00:47 2008 +0100
+
+ [Makefile] Sort COBJS in lib_<arch> Makefiles
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:00:47 2008 +0100
+
+ [new uImage] Optimize gen_get_image() flow control
+
+ When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
+ to do, update its control flow to better reflect that simple case.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Feb 4 08:28:17 2008 +0100
+
+ [new uImage] POWERPC: Split get_fdt() into get and relocate routines
+
+ PPC specific FDT blob handling code is divided into two separate routines:
+
+ get_fdt() - find and verify a FDT blob (either raw or image embedded)
+ fdt_relocate() - move FDT blob to within BOOTMAP if needed
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
Author: Jon Loeliger <jdl@freescale.com>
Date: Mon Feb 25 13:13:37 2008 -0600
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit d5934ad7756f038a393a9cfab76a4fe306d9d930
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Feb 4 08:28:09 2008 +0100
+
+ [new uImage] Add dual format uImage support framework
+
+ This patch adds framework for dual format images. Format detection is added
+ and the bootm controll flow is updated to include cases for new FIT format
+ uImages.
+
+ When the legacy (image_header based) format is detected appropriate
+ legacy specific handling is invoked. For the new (FIT based) format uImages
+ dual boot framework has a minial support, that will only print out a
+ corresponding debug messages. Implementation of the FIT specific handling will
+ be added in following patches.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
commit b29661fc1151077776454288051bc9a488351ce8
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Feb 24 15:21:36 2008 +0100
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+commit 5583cbf736474ef754e128a54fb78632f57b48fd
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:27:49 2008 +0100
+
+ [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2242f5369822bc7780db95c47985bb408ea9157b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:27:41 2008 +0100
+
+ [new uImage] Rename and move print_image_hdr() routine
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:20 2008 +0100
+
+ [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
+
+ Introducing routines for parsing new uImage format bootm arguments:
+ [<addr>]#<conf> - configuration specification
+ [<addr>]:<subimg> - subimage specification
+
+ New format images can contain multiple subimages of the same type. For example
+ a single new format image file can contain three kernels, two ramdisks and a
+ couple of FDT blobs. Subimage and configuration specifications are extensions
+ to bootm (and other image-related commands) arguments' syntax that allow to
+ specify which particular subimage should be operated on.
+
+ Subimage specification is used to denote a particular subimage. Configurations
+ are a bit more complex -- they are used to define a particualr booting setup,
+ for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
+ etc.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:19 2008 +0100
+
+ [new uImage] Add gen_get_image() routine
+
+ This routine assures that image (whether legacy or FIT) is not
+ in a special dataflash storage.
+
+ If image address is a dataflash address image is moved to system RAM.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:18 2008 +0100
+
+ [new uImage] Pull in libfdt if CONFIG_FIT is enabled
+
+ New uImage format (Flattened Image Tree) requires libfdt
+ functionality, print out error message if CONFIG_OF_LIBFDT
+ is not defined.
+
+ New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
+ This commit turns it on by default.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
Author: Michael Schwingen <michael@schwingen.org>
Date: Mon Feb 18 23:16:35 2008 +0100
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 5cf746c303710329f8040d9c62ee354313e3e91f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:59:09 2008 +0100
+
+ [new uImage] Move kernel data find code to get_kernel() routine
+
+ Verification of the kernel image (in old format) and finding kernel
+ data is moved to a dedicated routine. The routine will also hold
+ support for, to be added, new image format.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 7b325454fd231d4273de3fe373850f777fb086bf
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:58:20 2008 +0100
+
+ [new uImage] Cleanup FDT handling in PPC do_boot_linux()
+
+ Move FDT blob finding and relocation to a dedicated
+ get_fdt() routine. It increases code readability and
+ will make adding support for new uImage format easier.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:58:13 2008 +0100
+
+ [new uImage] Cleanup do_botm_linux() boot allocations
+
+ This patch moves common pre-boot allocation steps shared between PPC
+ and M68K to a helper routines:
+
+ common:
+ - get_boot_sp_limit()
+ - get_boot_cmline()
+ - get_boot_kbd()
+
+ platform:
+ - set_clocks_in_mhz()
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:57:17 2008 +0100
+
+ [new uImage] Move ramdisk loading to a common routine
+
+ Ramdisk loading code, including initrd_high variable handling,
+ was duplicated for PPC and M68K platforms. This patch creates
+ common helper routine that is being called from both platform
+ do_bootm_linux() routines.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:55:53 2008 +0100
+
+ [new uImage] Removed dead ramdisk code on microblaze architectures
+
+ Microblaze do_bootm_linux() includes ramdisk processing code but
+ the ramdisk does not get used anywhere later on.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5ad03eb3854c162684222a718b44c0716ea0db03
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:55:39 2008 +0100
+
+ [new uImage] Factor out common image_get_ramdisk() routine
+
+ Architecture specific do_bootm_linux() routines share common
+ ramdisk image processing code. Move this code to a common
+ helper routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:08 2008 +0100
+
+ [new uImage] Move FDT error printing to common fdt_error() routine
+
+ FDT error handling in PPC do_bootm_linux() shares the same message format.
+ This patch moves error message printing to a helper fdt_error() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 42b73e8ee00d48004791dea64b8093fb974c57e1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Factor out common routines for getting os/arch/type/comp names
+
+ Move numeric-id to name translation for image os/arch/type/comp header
+ fields to a helper routines: image_get_os_name(), image_get_arch_name(),
+ image_get_type_name(), image_get_comp_name().
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e99c26694a384221d336f6448c06a57479c0baa4
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Remove standalone applications handling from boootm
+
+ Standalone applications are supposed to be run using the "go" command.
+ This patch removes standalone images handling from the do_bootm().
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
+
+ Support for OF_FLAT_TREE is to be obsoleted in the near future,
+ remove related code from the bootm routines.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 82850f3d32a2661868ec6876bed7a22c55cef718
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Use image API in SH do_bootm_linux() routine
+
+ Introduce image handling API for lately added Hitachi SH architecture.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4a995edec1ac163d9326d143ffe2b47e7543407f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Rename architecture specific bootm code files
+
+ Implementation of the do_bootm_linux() and other bootm helper routines is
+ architecture specific code. As such it resides in lib_<arch> directories
+ in files named <arch>_linux.c
+
+ This patch renames those files to a more clear and accurate
+ lib_<arch>/bootm.c form.
+
+ List of the renamed files:
+ lib_arm/armlinux.c -> lib_arm/bootm.c
+ lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
+ lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
+ lib_i386/i386_linux.c -> lib_i386/bootm.c
+ lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
+ lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
+ lib_mips/mips_linux.c -> lib_mips/bootm.c
+ lib_nios/nios_linux.c -> lib_nios/bootm.c
+ lib_nios2/nios_linux.c -> lib_nios2/bootm.c
+ lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
+ lib_sh/sh_linux.c -> lib_sh/bootm.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 7582438c285bf0cef82909d0f232de64ec567a8a
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Return error on image move/uncompress overwrites
+
+ Check for overwrites during image move/uncompress, return with error
+ when the original image gets corrupted. Report clear message to the user
+ and prevent further troubles when pointer to the corrupted images is passed
+ to do_bootm_linux routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f13e7b2e993c61fed1f607962501e051940d6e80
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:12:17 2008 +0100
+
+ [new uImage] Cleanup image header pointer use in bootm code
+
+ - use single image header pointer instead of a set of auxilliary variables.
+ - add multi component image helper routines: get component size/data address
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:17:10 2008 +0100
+
+ [new uImage] Cleanup cmd_bootm.c
+
+ - sort and cleanup headers, declarations, etc.
+ - group related routines
+ - cleanup indentation, white spaces
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit af13cdbc01eaf88880978bfb4f603e012818ba24
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:45 2008 +0100
+
+ [new uImage] Add memmove_wd() common routine
+
+ Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 15158971f49255ccef54f0979a942cfd3de2ae52
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
+
+ Use image header copy instead of a (possibly corrupted) pointer to
+ a initial image location.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Remove I386 uImage fake_header() routine
+
+ I386 targets are not using a uImage format, instead fake header
+ is added to ram image before it is further processed by bootm.
+
+ Remove this fixup and force proper uImage use for I386.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 559316faf7eae0614c91d77f509b57d6c4c091ba
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Move CHUNKSZ definition to image.h
+
+ CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
+ move this definition to a common header.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Move gunzip() common code to common/gunzip.c
+
+ Move gunzip(), zalloc() and zfree() to a separate file.
+ Share zalloc() and zfree() with cramfs uncompress routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d45d5a18b6b36688f2365623f9d550566c664b5b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
+
+ Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
+ readable in PPC variant of do_bootm_linux() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
+
+ PPC implementation of do_bootm_linux() routine is moved to
+ a dedicated file lib_ppc/ppc_linux.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:14:09 2008 +0100
+
+ [new uImage] Define a API for image handling operations
+
+ - Add inline helper macros for basic header processing
+ - Move common non inline code common/image.c
+ - Replace direct header access with the API routines
+ - Rename IH_CPU_* to IH_ARCH_*
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ed29bc4e8142b46b626f67524207b36e43d9aad6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:19:58 2008 +0100
+
+ Add missing cmd_ximg.o to common/Makefile
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
Author: Grzegorz Bernacki <gjb@semihalf.com>
Date: Mon Jan 28 10:15:02 2008 +0100
projects / u-boot / blobdiff