* Patch by Stefan Roese, 06 Apr 2005:

[u-boot] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index a91ac93130230f2000a8f3687a8a515fba8fcda8..b0cdfc6dabfd06b0cdb89debaa741c07ce6864f4 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,106 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Patch by Stefan Roese, 06 Apr 2005:
+  Updates for OCOTEA board:
+  - Changed U-Boot size from 512kByte to 256kByte
+  - Fixed flash driver to support boot from soldered user flash
+  - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+    Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+  - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+  - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+  - update the pxa-regs.h file for PXA27x chips
+  - add PXA27x based ADSVIX board
+  - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+  Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+  Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+  (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+  Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+  - introduce two new configuration options instead:
+    CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+  reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+  add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+  fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+  - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+    the jumper for the HRCW source should select flash. If lowboot is
+    not selected, the jumper for the HRCW source should select the
+    BCSR.
+  - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+  Add support for Analogue & Micro Rattler boards.
+  Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+  Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+  bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+  - Add support for MicroSys CPU87 board
+  - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+  Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+  Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+  Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+  Add missing 440GX SDRAM Controller reset
+
 * Patch by Steven Scholz, 25 Oct 2004:
   Declare reset_cpu() in include/common.h instead locally