+commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jan 30 16:36:40 2009 -0600
+
+ Add feature-removal-schedule.txt
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 255d28e1642e8fc32a6753226be1a96b481ce111
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:32:38 2009 +0100
+
+ 8xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:31:47 2009 +0100
+
+ 8xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 8xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e915f8bb73d74178bc21d3a457959883b1afd1c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:36 2009 -0500
+
+ common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
+
+ Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
+ the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
+ code in the process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ab76e9848a1f4db64d14233741d739a3b3360c93
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:50 2009 -0500
+
+ bzip2: move ifdef handling to Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Thu Feb 5 22:18:02 2009 -0500
+
+ Fix whitespace damage: double space changed to a tab
+
+ At some point an intentional double space at the end of the sentence
+ got changed into a tab in the GPL header line:
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ This patch fixes the damage.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 4f975678de995b55749d5e84590c268972a7c835
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:53:29 2009 +0100
+
+ cfi: make flash_get_info() non static
+
+ If on your board is more than one flash, you must know
+ the size of every single flash, for example, for updating
+ the DTS before booting Linux. So make this function
+ flash_get_info() extern, and you can have all info
+ about your flashes.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Feb 5 23:58:25 2009 -0800
+
+ net: removed board-specific CONFIGs from MPC5xxx FEC driver
+
+ Added new CONFIG options for the three type of MAC-PHY interconnect and
+ applied them all relevant board config files
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 638ed3e296e70fab286d157b7adedaaa4a09a474
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:47 2009 -0500
+
+ net/sntp.c: move ifdef into Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Feb 3 18:26:41 2009 -0600
+
+ tsec: Fix a bug in soft-resetting
+
+ SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
+ clock cycles, so it's been mostly working. But we had no guarantee, and at
+ slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
+ enforces a 2 microsecond gap between assertion and deassertion.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
+Author: Simon Munton <simon@nidoran.m5data.com>
+Date: Mon Feb 2 09:44:08 2009 +0000
+
+ Fix 100Mbs ethernet operation on sh7763 based boards
+
+ 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
+ used in the GECMR register. Following diff fixes the problem
+
+ Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Fri Feb 6 16:27:55 2009 -0800
+
+ Fix MPC8260 with ethernet on SCC
+
+ This fixes MPC8260 compilation with ethernet on SCC. Probably was a
+ typo or something...
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:56:15 2009 +0100
+
+ 82xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:55:38 2009 +0100
+
+ 82xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 82xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 08:08:06 2009 -0600
+
+ ppc: Fix roll over bug in flush_cache()
+
+ If we call flush_cache(0xfffff000, 0x1000) it would never
+ terminate the loop since end = 0xffffffff and we'd roll over
+ our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 87c9063963561d3d01064be34d0c30855a56587b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:58 2009 -0600
+
+ ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
+
+ Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
+ between the two current users (lib_ppc/board.c, 44x SPD DDR2).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 47d41cc3a11a03c6d56146d056145df73f47eb50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:57 2009 -0600
+
+ Add an architecture specific config.h for common defines
+
+ We have common defines that we duplicate in various ways. Having an
+ arch specific config.h gives us a common location for those defines.
+
+ Eventually we should be able to replace this when we have proper
+ Kconfig support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:56 2009 -0600
+
+ mpc8641hpcn: Change PCI MEM pci bus address
+
+ Now that the rest of u-boot can support it, change the PCI bus
+ address of the PCI MEM regions from 0x80000000 to 0xc0000000,
+ and use the same bus address for both PCI1 and PCI2. This will
+ maximize the amount of PCI address space left over to map RAM
+ on systems with large amounts of memory.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 1785dbeed43599eed1d8875673c96912cd770141
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:55 2009 -0600
+
+ drivers/block/ahci: Fix pci mapping bug
+
+ The code assumes that the pci bus address and the virtual
+ address used to access a region are the same, but they might
+ not be. Fix this assumption.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:54 2009 -0600
+
+ MPC8641HPCN: Enable CONFIG_ADDR_MAP
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:53 2009 -0600
+
+ mpc8641hpcn: Clean up PCI mapping concepts
+
+ Clean up PCI mapping concepts in the 8641 config - rename _BASE
+ to _BUS, as it's actually a PCI bus address, separate virtual
+ and physical addresses into _VIRT and _PHYS, and use each
+ appopriately.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit c9315e6b4f244981de0b2eaaa29a7838a165b494
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:52 2009 -0600
+
+ mpc86xx: Add support to populate addr map based on BATs
+
+ If CONFIG_ADDR_MAP is enabled, update the address map
+ whenever we write a bat.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:51 2009 -0600
+
+ powerpc: Move duplicated BAT defines to mmu.h
+
+ The BAT fields are architected; there's no need for these to be in
+ cpu-specific files. Drop the duplication and move these to
+ include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
+ used by the alaska board, and switch to using the BATU_BL_xxx defines
+ used by all the other boards. The BL_ defines previously in use
+ had to be shifted into the proper position for use, which was inefficient.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6e61fae4d360a1380b63e7d007b31477e366bcce
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:50 2009 -0600
+
+ drivers/pci: Create pci_map_bar function
+
+ It is no longer always true that the pci bus address can be
+ used as the virtual address for pci accesses. pci_map_bar()
+ is created to return the virtual address for a pci region.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2ecca3401775b125c3b9ff65766befb23989414b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:49 2009 -0600
+
+ mpc8641hpcn: Set up outbound pci windows before inbound
+
+ Because the inbound pci windows are mapped generously, set up
+ the more specific outbound windows first. This way, when we
+ search the pci regions for something, we will hit on the more
+ specific region. This can actually be a problem on systems
+ with large amounts of RAM.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit b81b773ead0687114dc8a800f99ea6e504447739
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:52 2009 -0600
+
+ mpc8641hpcn: Use physical address in flash banks defintion
+
+ If the VA and PA of the flash aren't the same, the banks list
+ should be initialized to hold the physical address. Correct this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:32 2009 -0600
+
+ pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
+
+ When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
+ we should give preference to memory regions that aren't system memory.
+
+ Its possible that we have over mapped system memory in the regions and
+ we want to avoid depending on the order of the regions.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:31 2009 -0600
+
+ pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
+
+ The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
+ can be confusing when reading the code.
+
+ Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
+ for system memory mapping purposes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8da601280a8acbc3385784780ed35130e53812f1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:47:22 2009 -0600
+
+ NAND: Add timeout for reset command
+
+ Without the timeout present an infinite loop can occur if the
+ NAND device is broken or not present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:39:40 2009 -0600
+
+ NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
+
+ Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
+ for disabling the "No NAND device found!!!" warning when
+ CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
+ for silencing the warning.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Mon Jan 19 16:32:59 2009 +0200
+
+ NAND: Fixed invalid pointers to static relocated chip names
+
+ Dear Wolfgang,
+
+ You are right, the patch was ugly.
+ The new one seems to be better.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
+Author: derek@siconix.com <derek@siconix.com>
+Date: Mon Jan 26 14:08:17 2009 -0700
+
+ env_nand: fix env memory release
+
+ This fixes a bug that tmp environment memory not being released.
+
+ Signed-off-by: Derek Ou <dou@siconix.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6989e4f546d960a407dd5425f800dff9751c8132
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Feb 5 09:33:50 2009 -0500
+
+ Coldfire: M527x: Add missing GPIO register address defines
+
+ Add missing GPIO registers address definition for Coldfire M5271.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:42:58 2009 -0500
+
+ Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
+
+ Modified mii_init to support boards with PHYs that are not set to
+ autonegotiate, but still want to use u-boot's mii commands to probe
+ the smi bus. Such PHYs will not set the Autonegotiate-done bit.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 11:44:30 2009 -0500
+
+ Coldfire: Applied baudrate formula of serial_init to serial_setbrg
+
+ Applied the patch for baudrate divider value truncation for
+ serial_init to serial_setbrg as well.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:07:05 2009 -0500
+
+ Coldfire: M5271EVB: Board header update (dependencies)
+
+ Cleanup for M5271EVB:
+ Added clarification on the use of CONFIG_SYS_CLOCK.
+ Modified to use u-boot's HUSH parser.
+ Cleanup on environment settings.
+ Removed compiler warning by defining CONFIG_SYS_CS0_*
+
+ Dependencies:
+ Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
+ This depends on a patch to include/asm-m68k/m5271.h
+ that defines the multiplier and divider ratios.
+
+ Removed the definition of CONFIG_SYS_FECI2C.
+ This depends on a patch that removes the use of it in
+ cpu/mcf52x2/cpu_init.c
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit e0db344fabfeb4f9649846f94838f51172f6a1f6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Jan 29 14:36:06 2009 -0500
+
+ Coldfire: M5271: Allow board header file to specify clock multiplier
+
+ M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
+
+ Allow the board header file to set their own multiplier and divider.
+ Added the #define for the multiplier and divider to the cpu header file.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 10:47:13 2009 -0500
+
+ Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
+
+ Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
+ Use read-modify-write to activate the FEC pins without disabling I2C.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit ee73cc59ab904976af3c33b454fc84f78618b2d1
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:45:34 2009 -0500
+
+ Coldfire: cmd_bdinfo cleanup
+
+ CONFIG_M68K bdinfo cleanup:
+
+ Fixed compiler warning about baudrate printing.
+ format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
+
+ Added printing of "cpufreq"
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:27:00 2009 -0500
+
+ Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
+
+ Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
+ was causing the bus clock (not CPU clock) to be declared twice as
+ fast as it actually is. This causes UARTS to operate at half the
+ specified baudrate.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 59d1bda7f92c8a28c3aba94e48063749d425949f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Feb 3 15:15:21 2009 +0100
+
+ ppc4xx: Make PCIE support selectable
+
+ On some platforms PCIE support is not required, but would be included
+ because the cpu supports it. To reduce fooprint it is now configurable
+ via CONFIG_PCI_DISABLE_PCIE.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b129eff5ede394cc1faeb6dbf6a987e91abce552
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Feb 3 22:13:16 2009 +0100
+
+ ppc4xx: Only fixup opb attached UARTs
+
+ This patch updates the fdt UART clock fixup code to
+ only touch CPU internal UARTs on 4xx systems.
+ Only these UARTs are definitely clocked by gd->uart_clk.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 13 11:00:29 2009 -0500
+
+ Blackfin: move default boot SPI CS to common code
+
+ Move the default SPI CS that we boot from into common code so that it can
+ be used in other SPI drivers and environment settings.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Dec 10 12:33:54 2008 -0500
+
+ Blackfin: dynamically update UART speed when initializing
+
+ Previously, booting over the UART required the baud rate to be known ahead
+ of time. Using a bit of tricky simple math, we can calculate the new board
+ rate based on the old divisors.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+commit 97f265f14f23050f3cb997f617f3a6917b843ea2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:21:08 2008 -0500
+
+ Blackfin: add support for fast SPI reads with Boot ROM
+
+ Newer Blackfin boot roms support using the fast SPI read command rather than
+ just the slow one. If the functionality is available, then use it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67619982bfc5cd62710a48e3cbffc304cb78c341
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:46:52 2008 -0400
+
+ Blackfin: check for reserved settings in DDR MMRs
+
+ Some bits of the DDR MMRs should not be set. If they do, bad things may
+ happen (like random failures or hardware destruction).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:54:00 2008 -0400
+
+ Blackfin: set default voltage levels for BF538/BF539 parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:29:57 2008 -0400
+
+ Blackfin: use on-chip syscontrol() rom function when available
+
+ Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
+ to be used to properly program the memory and voltage settings as it will
+ include (possibly critical) factory tested bias values.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:44:52 2009 +0100
+
+ cfi_flash: Fix typo in cfi_flash.c
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small typo and compilation warning for systems with CFI
+ legacy support (e.g. hcu4). This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28745db969b72693754991c838f68a7fb4a8b1ab
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 11:21:38 2009 +0100
+
+ jedec_flash: Only use manufacturer defines from common flash.h
+
+ This patch removes the double defined manufacturer defines from
+ jedec_flash.c. Since the common defines in flash.h are 32bit
+ we now need the (16) cast. This patch also removes the compilation
+ warning (e.g. seen on hcu5):
+
+ ./MAKEALL hcu5
+ Configuring for hcu5 board...
+ jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:25:57 2009 +0100
+
+ cfi_flash: Silence compilation warning
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small compilation warning. This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:51 2009 -0600
+
+ flash/cfi_flash: Use virtual sector start address, not phys
+
+ include/flash.h was commented to say that the address in
+ flash_info->start was a physical address. However, from u-boot's
+ point of view, and looking at most flash code, it makes more
+ sense for this to be a virtual address. So I corrected the
+ comment to indicate that this was a virtual address.
+
+ The only flash driver that was actually treating the address
+ as physical was the mtd/cfi_flash driver. However, this code
+ was using it inconsistently as it actually directly dereferenced
+ the "start" element, while it used map_physmem to get a
+ virtual address in other places. I changed this driver so
+ that the code which initializes the info->start field calls
+ map_physmem to get a virtual address, eliminating the need for
+ further map_physmem calls. The code is now consistent.
+
+ The *only* place a physical address should be used is when defining the
+ flash banks list that is used to initialize the flash_info struct,
+ usually found in the board config file.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Feb 4 09:42:20 2009 +0100
+
+ Fix compiler warning
+
+ (shows up only when DEBUG is enabled)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:45:55 2008 -0400
+
+ Blackfin: update anomaly lists
+
+ Update the anomaly lists to match latest anomaly sheets.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
+Author: Ralph Kondziella <rk@argos-messtechnik.de>
+Date: Mon Jan 26 12:34:36 2009 -0700
+
+ ADS5121 Add PATA support
+
+ Original patch from Ralph Kondziella
+ plus clean up by Wolfgang Denk
+ plus changes by John Rigby
+ use ips clock not lpc
+ port forward to current u-boot release
+
+ Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit abfbd0ae4967df18102345db4f4b529a13da107b
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Mon Jan 26 10:45:07 2009 -0700
+
+ ADS5121 Add IC Ident Module (IIM) support
+
+ IIM (IC Identification Module) is the fusebox for the mpc5121.
+ Use #define CONFIG_IIM to turn on the clock for this module
+ use #define CONFIG_CMD_FUSE to add fusebox commands.
+ Fusebox commands include the ability to read
+ the status, read the register cache, override the register cache,
+ program the fuses and sense them.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jan 23 10:33:15 2009 -0700
+
+ ADS5121 Fix rev2 silicon pci iopad config
+
+ Reset config is not correct
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 4c154252c480b13f69ce1b71a9530b0515da76a6
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Nov 19 13:57:34 2008 -0700
+
+ ADS5121 DIU Add diu_bmp_addr env
+
+ Add support for using a bmp other than
+ FSL_Logo_BMP for the DIU splash screen.
+
+ Can now set the env var "diu_bmp_addr" to
+ the address of a BMP in flash to use instead
+ of the default FSL_Logo_BMP.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Oct 30 16:39:35 2008 -0600
+
+ ADS5121 DIU Make inclusion of FSL logo optional
+
+ Make inclusion of FSL logo optional and
+ turn it off by default.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bd99ec149abe94e7f6b2bda4766d701b4005053f
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Feb 1 12:27:53 2009 +0100
+
+ Compile warning fix in onenand_uboot.h
+
+ Regression since merge window after 2009.01
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a270d1e7295c3d829f42c0480117941dfc1c6477
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 06:33:55 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller (really with driver now)
+
+ Somehow I missed the real driver part in my last patch version. This patch
+ now adds the driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
+Author: Cliff Cai <cliff.cai@analog.com>
+Date: Sat Nov 29 18:22:38 2008 -0500
+
+ Blackfin: add driver for on-chip MMC/SD controller
+
+ This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
+
+ Signed-off-by: Cliff Cai <cliff.cai@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:47:34 2008 -0400
+
+ Blackfin: add port muxing for BF51x SPI
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc68f9f85959664d528daea2aef5ef54974331ce
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 6 06:16:19 2009 -0500
+
+ Blackfin: output booting source when booting
+
+ Knowing the booting source of the part is useful, especially when the part
+ can switch dynamically between sources.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8df3ce0f49c37947800ac7c84e751499882619fc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:30:46 2008 -0500
+
+ Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
+
+ Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
+ the Blackfin on-chip bootrom to boot out of SPI flash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b4a486e6fac502d8b883e344cc4012283945b3d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 04:06:26 2008 -0500
+
+ Blackfin: update asm-blackfin/posix_types.h to latest Linux version
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e5eb93e77391bcc308697116c544ea1340aaae8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:54:52 2008 -0500
+
+ Blackfin: add port I bits
+
+ Some people need to access port I, so make sure the pins are defined.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a6b272596d43de0db4943eac7af58c3534c4026
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Wed Nov 26 22:16:45 2008 -0500
+
+ Blackfin: add driver for on-chip ATAPI controller
+
+ This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 26 21:43:06 2008 -0500
+
+ Blackfin: add driver for on-chip NAND controller
+
+ This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4148e02abae9a099f4444b5e168ebc2b911d2295
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 12 07:18:15 2008 -0500
+
+ Blackfin: build with -mno-fdpic
+
+ Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
+ up u-boot, including ones that output FDPIC ELF by default.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 11 05:43:57 2008 -0500
+
+ Blackfin: fix up EBIU defines
+
+ The EBIU defines for EBSZ 256/512 were incorrect.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 12:45:24 2008 -0500
+
+ Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
+
+ Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
+ as usable with the source/destination addresses and the count size.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b93c68648426f906d63b98117496b6415f505f39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 08:50:23 2008 -0500
+
+ Blackfin: only flag L1 instruction for DMA memcpy
+
+ The performance difference from doing an 8 bit DMA memcpy vs an optimized
+ core memcpy can be pretty big when you add in the overhead of setting up the
+ MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
+ actually require it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 07:20:37 2008 -0500
+
+ Blackfin: dma_memcpy(): fix random failures
+
+ We have to make sure the DMA channel is actually disabled in hardware before
+ attempting to reprogram it. Otherwise the new settings are ignored and we
+ end up with random hangs/failures.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 00:04:03 2008 -0500
+
+ Blackfin: rewrite cache handling functions
+
+ Take the cache flush functions from the kernel as they use hardware loops in
+ order to get optimal performance.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Nov 3 22:30:05 2008 -0500
+
+ Blackfin: setup bi_enetaddr for single nets
+
+ For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
+ based on $ethaddr, so set it up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 40599239e7875b39e2a5c12e6545992041c72c52
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 22:48:47 2008 -0400
+
+ Blackfin: cache core/system clock values
+
+ Calculating the clocks requires a bit of calls to gcc math functions, so
+ cache the values after the first run since they'll most likely never
+ change once U-Boot is up and running.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6957a6209b02f6b69607fc47425f13731cc477f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 18:18:16 2008 -0400
+
+ Blackfin: enable --gc-sections
+
+ Start building all Blackfin boards with -ffunction-sections/-fdata-sections
+ and linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 21:08:54 2008 -0400
+
+ Blackfin: dont check baud if it wont actually get used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 400f5778f375bc99c73c8488c555def261ccfab7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:54:09 2008 -0400
+
+ Blackfin: add driver for on-chip SPI controller
+
+ This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 18 05:33:51 2008 -0400
+
+ Blackfin: only build post code when CONFIG_POST
+
+ Save some time by using CONFIG_POST in the Makefile rather than C files.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 8 11:57:57 2009 -0500
+
+ Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
+
+ Redo how pointers are managed to get rid of ugly casts and strict pointer
+ aliasing issues that are highlighted by gcc 4.3.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:46:21 2008 -0500
+
+ Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
+
+ No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
+ does exactly the same thing as common "CONFIG_RMII".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 06:36:15 2008 -0500
+
+ Blackfin: bfin_mac: use common debug()
+
+ Rather then defining our own DEBUGF(), just use the common debug().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 13:59:51 2008 -0400
+
+ Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
+
+ Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
+ of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ac45af4e63ea925f4accc98453aab1a1166c196d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 04:52:00 2008 -0400
+
+ Blackfin: bfin_mac: cleanup MII/PHY functions
+
+ Cleanup and rewrite the MII/PHY related functions so that we can reuse the
+ existing common linux/miiphy.h code and hook into the `mii` command.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6b310a05f0d10c751f22468040932139f71c71d3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 00:31:30 2008 -0400
+
+ Blackfin: bfin_mac: set MDCDIV based on SCLK
+
+ Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
+ use the real algorithm so it gets set correctly regardless of SCLK.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 930590f3e49c8f32256edf2e5861e1535a329c6c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:10:48 2009 +0100
+
+ ixp: move serial to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f90c8022f448bc5e93090e4b714368e52e912f0f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:04:58 2009 +0100
+
+ ixp: move pci init in arm/board instead of cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:56:49 2009 +0100
+
+ ixp: move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 012d5bab09a534e4800b02f50cf508e6837202ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f693f501d67434df1f815fd1824a71973ae08207
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: add missing os define
+
+ need by arm-elf toolchains and no impact on the arm-linux one
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:53:39 2009 +0100
+
+ ixp: remove the option to include the Microcode
+
+ instead the board will have to load it from flash or ram
+ which will be specified by npe_ucode env var
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b017baf2071d8daf643bce87250db898c606c66
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 30 09:45:23 2009 +0100
+
+ ixp/npe: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:04 2009 +0100
+
+ SX1: add hardware V2 support
+
+ In the V2 the 2 flash has been replace by one 32MB flash
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f877f2233dbcd7417c2f0babe6a849099b167f3c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: Fix second flash mapping
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:57:59 2009 +0100
+
+ move Samsung's board to board/samsung
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jan 29 12:07:21 2009 +0100
+
+ move ARM Ltd. to vendor dir
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:37 2009 -0500
+
+ ppc4xx: Clean up configuration file for Korat board
+
+ This patch updates the default environmental variables for the
+ Korat PPC 440EPx board, and makes additional minor fixes.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f20405e31680efc36293c59b4963db57c9d93df4
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:02 2009 -0500
+
+ ppc4xx: Add variable "korat_usbcf" for Korat board
+
+ The new environment variable "korat_usbcf" selects the USB
+ port used by the Korat board's CompactFlash controller.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
+Author: Gunnar Rangoy <gunnar@rangoy.com>
+Date: Fri Jan 23 12:56:31 2009 +0100
+
+ AVR32: macb - Search for PHY id
+
+ This patch adds support for searching through available PHY-addresses in
+ the macb-driver. This is needed for the ATEVK1100 evaluation board,
+ where the PHY-address will be initialized to either 1 or 7.
+
+ This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
+ enabled tells the driver to search for the PHY address.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit af8626e0c08a780d9ded1d9c4883a89355f60e75
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:26 2009 +0100
+
+ Fix IP alignment problem
+
+ This patch removes volatile from:
+ volatile IP_t *ip = (IP_t *)xip;
+
+ Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
+ using volatile, which causes an exception since xip isn't aligned on a word
+ boundary.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 12a8b9db12f82a189ff143a58731007f5469da61
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Wed Jan 28 16:17:21 2009 -0800
+
+ Marvell 88E1118 interrupt fix
+
+ This patch adjusts the LED control so that interrupt lines are not reading LEDs
+ and effectively causing indefinite interrupts to the controller.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:14:26 2009 +0100
+
+ net: smc911x.c: Add LAN9211 to chip_ids[] array
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:53:39 2009 -0500
+
+ Move is_valid_ether_addr() to include/net.h
+
+ Import the is_valid_ether_addr() function from the Linux kernel.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 12:25:13 2009 +0100
+
+ net: Sort Makefile labels
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 23:06:42 2009 +0100
+
+ 85xx: Fix compile breakage with sbc8540 and sbc8560
+
+ This fixes an error which raises just a warning:
+ sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 28 13:48:55 2009 -0500
+
+ SPD823TS: do not define CONFIG_CMD_ENV
+
+ Since the SPD823TS board does not actually have any writable flash to save
+ its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
+ disabled.
+
+ This fixes the build error:
+ common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
+ common/cmd_nvedit.c:557: undefined reference to `saveenv'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:40:16 2009 +0100
+
+ OMAP3: Add Zoom1 board support
+
+ Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
+ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add Pandora support
+
+ Add Pandora support.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add EVM board
+
+ Add EVM board support.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:57 2009 +0100
+
+ OMAP3: Add Overo board
+
+ Add Overo board support.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit f904cdbb68167c647887f19929ad295dbaac8862
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Jan 27 18:19:12 2009 +0100
+
+ OMAP3: Add common power code, README, and BeagleBoard
+
+ Add BeagleBoard support, common power code and README.
+
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 28 08:31:10 2009 -0600
+
+ 85xx: Fix compile breakage with MPC8540EVAL
+
+ Configuring for MPC8540EVAL board...
+ mpc8540eval.c: In function 'checkboard':
+ mpc8540eval.c:53: error: invalid operands to binary /
+ make[1]: *** [mpc8540eval.o] Error 1
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Sun Jan 18 23:04:27 2009 -0500
+
+ usb_scan_devices: fix output with no devices
+
+ We should check the return of usb_new_device() so that if no USB device is
+ found, we print out the right message rather than always saying "new usb
+ device found".
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit f1c1f540243438246aefb703fdcf16957e3a72e1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 22 10:11:21 2009 +0100
+
+ USB: Add high-speed (480Mb/s) to all USB related outputs
+
+ With this patch the USB related connection speed output ("usb tree" command and
+ debug output) is now high-speed enabled.
+
+ This patch also fixes a compilation warning when debugging is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:19 2009 +0100
+
+ USB: Add dcache support to the EHCI driver
+
+ This patch adds routines to handle (flush/invalidate) the dcache for the
+ QH and qTD structures and data buffers. This is needed on platforms using
+ this EHCI support with dcache enabled (like the MIPS VCT board port).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:28 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:10 2009 +0100
+
+ USB: Add config option to call ehci_hcd_init() again after EHCI reset
+
+ This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
+ to call ehci_hcd_init() again after ehci_reset() is executed. This
+ is needed for the upcoming VCT EHCI support which needs to re-init
+ the hcd part again after the EHCI CMD_RESET is executed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 597eb28bd9691266b7b804364cda577cdb51d106
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:01 2009 +0100
+
+ USB: Fix speed detection on EHCI cntr with root hub transaction translators
+
+ This patch fixes an issue that the speed of USB devices was not detected
+ correctly on some EHCI controllers. This will be used on the upcoming VCT
+ EHCI support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:20 2009 +0530
+
+ usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
+
+ Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
+ configuration file.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 538ef967715322f64ee08efa2296d9682111b014
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:16 2009 +0530
+
+ usb : musb : Enabling DM6446 (TI DaVinci) USB module power
+
+ Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
+ controller hook up to USB core layer.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e142e9f35f8ec61e74bf8019428b003f5070c33b
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:13 2009 +0530
+
+ usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
+
+ Adding DM6446 (TI DaVinci) platform specific USB functionality for
+ USB Phy and VBUS initialization.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:09 2009 +0530
+
+ usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
+
+ Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
+ platform.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a142896934c755e679ba87e227a8e449f39b0012
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:03 2009 +0530
+
+ usb : musb : Adding host controller driver for Mentor USB controller
+
+ Adding Mentor USB core functionality and Mentor USB Host controller
+ functionality for Mentor USB OTG controller (musbhdrc).
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 1 18:27:27 2009 -0500
+
+ usb.h: use standard __LITTLE_ENDIAN from Linux headers
+
+ Rather than forcing people to define a custom "LITTLEENDIAN", just use the
+ __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
+ already setting up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 7b6e31eb17e3ff76238a60803fc531517d516223
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:56 2008 +0100
+
+ USB ehci ixp4xx support
+
+ Add USB ehci ixp4xx host controller. Test on ixdp465 board.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:22 2008 +0100
+
+ USB ehci remove infinite loop and use handshake function
+
+ USB ehci code cleanup. Use handshake instead of infinite while loop
+ to check the STD_ASS status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 8fea2914ac974029b65926ef8247d908f84d202d
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:32:41 2008 +0100
+
+ Add initial support for USB ehci pci
+
+ Add USB ehci pci support. This patch doesn't include any
+ pci_ids and it is not tested on real hardware.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
+Author: Bryan Wu <Bryan.Wu@analog.com>
+Date: Thu Jan 1 19:48:07 2009 -0500
+
+ usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
+
+ The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
+ does not like to be reset, so check for it.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1eb734fed3b79a5e6106dad16e88041894fdab30
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 12:15:35 2009 +0530
+
+ usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
+
+ This patch populates the 'priv' field of the USB keyboard device_t
+ structure. The 'priv' field is populated with the address of the
+ 'struct usb_device' structure that represents the USB device.
+
+ The 'priv' field can then be used in the 'usb_event_poll' function to
+ determine the USB device that requires to be polled. An
+ example of its usage in 'usb_event_poll' function is as below.
+
+ device_t *dev;
+ struct usb_device *usb_kbd_dev;
+
+ <snip>
+
+ dev = device_get_by_name("usbkbd");
+ usb_kbd_dev = (struct usb_device *)dev->priv;
+ iface = &usb_kbd_dev->config.if_desc[0];
+
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 366523c26b6320af171459b19e6e0e9e3baa83ca
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Thu Dec 18 10:05:37 2008 +0100
+
+ USB change speed
+
+ USB changes the speed according to the port status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
+Author: Remy Böhmer <linux@bohmer.net>
+Date: Sat Dec 13 22:51:58 2008 +0100
+
+ EHCI fix code and ixp4xx test.
+ USB ehci configuration parameter:
+
+ #define CONFIG_CMD_USB 1
+ #define CONFIG_USB_STORAGE 1
+ #define CONFIG_USB_EHCI
+ #define CONFIG_USB_EHCI_IXP4XX 1
+ #define CONFIG_EHCI_IS_TDI 1
+ #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
+ #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
+ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+ #define CONFIG_LEGACY_USB_INIT_SEQ 1
+
+ 2 USB Device(s) found
+ scanning bus for storage devices... 0 Storage Device(s) found
+ => usb tree
+
+ Device Tree:
+ 1 Hub (1.5MBit/s, 0mA)
+ | u-boot EHCI Host Controller
+ |
+ |+-2 Mass Storage (12MBit/s, 100mA)
+ Sony Storage Media 0C07040930296
+
+ =>
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
+Author: michael <michael@panicking.retis>
+Date: Thu Dec 11 13:43:55 2008 +0100
+
+ [PATCH] This patch add varius fix to the ehci.
+ - fix ehci_readl, ehci_writel
+ - introduce new define in ehci.h
+ - introduce the handshake function for waiting on a register
+ - fix usb_ehci_fsl with the new HC_LENGTH macro
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit db63299b1dd2894ade542278210bccd046de6435
+Author: michael <michael@panicking.retis>
+Date: Wed Dec 10 17:55:19 2008 +0100
+
+ [PATCH] Fix EHCI usb. I start to test on a
+ IXP465 board and I find some errors in the code. This
+ patch fix:
+ - descriptor initizialization (config, interface and endpoint
+ must be one next-to the other when the USB_DT_CONFIG message
+ is send.
+ - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
+ and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
+ - Introduce the linux version of the usb_config_descriptor and
+ usb_interface descriptor. This descriptor does't contains
+ u-boot extension.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 6b92487dcf9afe83a3570153d66940fdb293be76
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:22:09 2008 +0100
+
+ USB ehci freescale support
+
+ Add USB ehci freescale support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit aaf098cfeed04595d4c5100ffd39095d79edbf90
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:20:46 2008 +0100
+
+ USB ehci core support
+
+ Add USB ehci core support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 3e126484df7868e341545cce740b24b62b0cd3b7
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:19:19 2008 +0100
+
+ Prepare USB layer for ehci
+
+ Prepare USB layer for ehci support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 10 15:52:06 2008 +0100
+
+ USB storage cleanup patch
+
+ Cleanup usb storage
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit fe033ad6d0883063fe857237abb9436fab03208c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 06:02:55 2008 -0400
+
+ Blackfin: fixup misc warnings such as printf's and missing casts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 22:09:26 2008 -0400
+
+ Blackfin: convert old boards to use COBJS-y Makefile style
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:38:37 2008 -0400
+
+ Blackfin: bf533-stamp: rewrite resource swap logic
+
+ The old swap function tended to clobber unrelated pins and screw up masks.
+ Rewrite the thing from scratch so it only uses the resources it needs.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 29d4ea0a9073c82469184331010136f52edf8db6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:08:42 2008 -0400
+
+ Blackfin: bootldr: implement BF53x/BF56x LDR loader
+
+ The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
+ arbitrary memory locations, so implement a basic one in software.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b35e3aeff6c2d747c37697997b3f8a808432329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:05:42 2008 -0400
+
+ Blackfin: implement real write support for OTP
+
+ Now that real documentation has been released for the OTP interface and
+ the on-chip ROM wrt writing/timings, implement support for reading/writing
+ as well as dumping/locking.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:04:05 2008 -0400
+
+ Blackfin: update on-chip ROM API
+
+ This brings the API for the on-chip ROM in line with the toolchain and
+ hardware documentation.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7633903bff432ec7b27905dce7396958553f2be6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:52:17 2008 -0400
+
+ Blackfin: allow serial console to be disabled
+
+ Some devices have no UART device pulled out, so allow people to disable the
+ driver completely in favor of other methods (like JTAG-console).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:51:20 2008 -0400
+
+ Blackfin: support console-over-JTAG
+
+ The Blackfin JTAG has the ability to pass data via a back-channel without
+ halting the processor. Utilize that channel to emulate a console.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf8f2efb5f39c5225da92391c14a07eecbeca881
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:49:06 2008 -0400
+
+ Blackfin: handle new anomalies with reset
+
+ Workaround fun new anomalies related to software reset of the processor.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:44:00 2008 -0400
+
+ Blackfin: pass RETX to Linux
+
+ Make sure we save the value of RETX at power on and then pass it on to the
+ kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:40:26 2008 -0400
+
+ Blackfin: clarify relocation comment during init
+
+ People often ask questions about the init process and when things go
+ from flash to relocated base, so clarify the comments a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:23:41 2008 -0400
+
+ Blackfin: just set SP register directly during init
+
+ No need to set the SP register indirectly to the configured value when it
+ can be set directly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:15:53 2008 -0400
+
+ Blackfin: add portmuxing for UARTs on the BF51x
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4f6a313240c531042f16909a3a170ab047b95779
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:26:29 2008 -0400
+
+ Blackfin: respect CONFIG_CLKIN_HALF
+
+ As pointed out by Ivan Koryakovskiy, the initialization code was not
+ actually respecting the CONFIG_CLKIN_HALF option when configuring the
+ PLL_CTL register.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:21:34 2008 -0400
+
+ Blackfin: use common memcpy routine during init
+
+ Rather than using a local custom memcpy function, just call the existing
+ optimized Blackfin version.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 362c943347364e9373af4c5530778491ab56ec2e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:27:06 2008 -0400
+
+ Blackfin: set default boot SPI CS for BF538/BF539
+
+ The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
+ Blackfin parts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:20:59 2008 -0400
+
+ Blackfin: punt unused BF533-STAMP definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 18 20:44:11 2008 -0400
+
+ Blackfin: resurrect BF533-STAMP video splash driver
+
+ This video driver used to live in the Blackfin cpu directory, but it was
+ lost during the unification process. This brings it back.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a750d038f2548d846ea1e046d873dc932d041319
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:31:29 2008 -0400
+
+ Blackfin: tighten up post memory coding style
+
+ No functional changes here; just cleanup code style a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:29:18 2008 -0400
+
+ Blackfin: bf537-stamp nand: fix more style errors in previous commit
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 41f3325ae9add641036d7cb362e884b698e53f07
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:31:17 2008 -0400
+
+ Blackfin: drop dead/wrong debug code in initdram()
+
+ The DEBUG code in initdram() is quite old and was never really useful, so
+ just drop it altogether. Common Blackfin debug code does a better job.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:30:28 2008 -0400
+
+ Blackfin: bf533-ezkit: shuffle flash defines a little
+
+ Some of the flash defines weren't in the correct location and caused build
+ problems in some configurations, so let's move types and defines to better
+ local locations.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be853bf86b41e91f4c422f0f56fdf87ea3191266
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:16:47 2008 -0400
+
+ Blackfin: overhaul i2c driver
+
+ The current Blackfin i2c driver does not work properly with certain devices
+ due to it breaking up transfers incorrectly. This is a rewrite of the
+ driver and relocates it to the newer place in the source tree.
+
+ Also remove duplicated I2C speed defines in Blackfin board configs and
+ disable I2C slave address usage since it isn't implemented.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:00:07 2008 -0400
+
+ Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
+
+ Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
+ 128kB when setting up the default flash protection region for U-Boot
+ itself.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:57:39 2008 -0400
+
+ Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
+
+ When setting up the global data, rather than relying on sizeof(), use the
+ common CONFIG_SYS_GBL_DATA_SIZE define.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 01815c2d06c5b838f2cd536703e47bd2c9148194
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:52:24 2008 -0400
+
+ Blackfin: implement general support for CONFIG_STATUS_LED
+
+ Here are the Blackfin-specific and board-independent pieces for status leds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6882b5a79a3247494b62c05015fa672557f1bfaa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:49:32 2008 -0400
+
+ Blackfin: do not init i2c in Blackfin board init
+
+ The common code takes care of calling i2c_init() when needed, so no point
+ in us doing it as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1118ea73698eee6e72ef5cbfc00e41746040304f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:42:20 2008 -0400
+
+ Blackfin: bfin_mac: update port muxing
+
+ Adds support more Blackfin parts and fixes broken muxing for older ones.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 05b75e48832fc4afeecf8e76d704349557dffa35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:35:44 2008 -0400
+
+ Blackfin: fix dcache handling when doing dma memcpy's
+
+ Our dcache invalidate function doesn't just invalidate, it also flushes.
+ So rename the function accordingly and fix the dma_memcpy() function so it
+ doesn't inadvertently corrupt the data destination.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68e5632494168095d75f120af70043b68afd2476
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:56:56 2008 -0400
+
+ Blackfin: dont generate ldrs with --force
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:55:30 2008 -0400
+
+ Blackfin: pass --bmode/--initcode when creating ldr
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:39:27 2008 -0400
+
+ Blackfin: minimize time cache is turned off when replacing cplb entries
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 21d631360430cf0ae9099612273cd4de28911ba9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:31:13 2008 -0400
+
+ Blackfin: split cache handling out of dma_memcpy()
+
+ Creating a new dma_memcpy() function that skips all cache checks allows us
+ to use the function in very early init where the cache is not yet setup.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d31eb38512bed377d5d4b3c696662e52120a2e4c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:30:49 2008 -0400
+
+ Blackfin: abort dma_memcpy() for L1 scratchpad
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 81b799add709177e838466461f7b9989488b0fd5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:27:52 2008 -0400
+
+ Blackfin: rename bootm.c to boot.c
+
+ The boot file contains functions for more than just "bootm", so rename it
+ accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:22:37 2008 -0400
+
+ Blackfin: set more sane default board config values
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36cd52a00794fb15ffab05d640acca92d7482993
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:24:59 2008 -0400
+
+ Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8054bc12e00669bd7588f2b30fef48aa94babac
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:27 2008 -0400
+
+ Blackfin: add bit defines for DDR parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 154502fe0796f3b7a4698378c5d2080ae28a9782
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:11 2008 -0400
+
+ Blackfin: add defines to describe active bootrom behavior
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 27 16:03:53 2009 -0600
+
+ mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
+
+ extend commit c70564e6b1bd08f3230182392238907f3531a87e
+ "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
+ to the simpc8313 build and fix this:
+
+ ...Large Page NAND...Configuring for SIMPC8313 board...
+ nand_boot_fsl_elbc.o: In function `nand_boot':
+ nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
+ make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
+ make: *** [nand_spl] Error 2
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54a7cc4912feefa45be961cc47cc159563725d2f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 09:25:31 2009 +0100
+
+ mpc8536ds.c: include sata.h to for needed function prototypes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:12 2009 -0600
+
+ Command usage cleanup
+
+ Remove command name from all command "usage" fields and update
+ common/command.c to display "name - usage" instead of
+ just "usage". Also remove newlines from command usage fields.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:11 2009 -0600
+
+ amcc: Clean up command usage output
+
+ Update taihu and taishan commands to use cmd_usage() function
+ to display usage messages.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 62c3ae7c6ef215b1afa614abdf61acf077752207
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:10 2009 -0600
+
+ Standardize command usage messages with cmd_usage()
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:09 2009 -0600
+
+ pcs440ep: Clean up led command definition
+
+ The pcs440ep's led command usage formatting is non-standard. It
+ was made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:08 2009 -0600
+
+ Clean up diufb command definitions
+
+ The diufb command usage formatting is non-standard. It was
+ made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 6450a8485836fc80615ae6de6a864c33369b44f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 00:29:26 2009 +0100
+
+ Update CHANGELOG, tiny coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:12:21 2009 -0500
+
+ SATA: do not auto-initialize during boot
+
+ Rather than have the board code initialize SATA automatically during boot,
+ make the user manually run "sata init". This brings the SATA subsystem in
+ line with common U-Boot policy.
+
+ Rather than having a dedicated weak function "is_sata_supported", people
+ can override sata_initialize() to do their weird board stuff. Then they
+ can call the actual __sata_initialize().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50970839712dda35399e2fa83fe818df9354d618
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Mon Jan 26 08:45:14 2009 -0500
+
+ part_efi: Fix partition size calculation due to inclusive ending LBA.
+
+ The ending LBA is inclusive. Hence, the partition size should be
+ ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
+
+ This is confirmed against the results from the parted tool.
+ (e.g. use parted /dev/sda -s unit S print) and observe the size.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
+Author: Tomasz Figa <tomasz.figa@gmail.com>
+Date: Tue Dec 30 18:35:57 2008 +0100
+
+ jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
+
+ This patch fixes a bug (?) introduced after inclusion of the new
+ JFFS2 code.
+
+ When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
+ fill in part->sector_size (keeping it as 0), but a correct value is
+ needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
+ to be in the same place of the memory, what obviously means
+ impossibility to use the JFFS2 partition.
+
+ This problem is fixed in this patch by including sector size
+ calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
+
+ Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
+
+commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 02:59:25 2008 -0500
+
+ saveenv: standardize enablement
+
+ Rather than special casing each environment type for enabling the saveenv
+ command, have them all behave the same. This avoids bitrot as new env
+ sources are added/removed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Mon Dec 29 17:36:01 2008 -0600
+
+ soft_i2c.c add option for repeated start in i2c_read()
+
+ This patch adds a #define to optionally change the behaviour of
+ i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
+ stop-start between sending the device address pointer write and
+ reading back the data. The current behaviour is retained as the
+ default.
+
+ While most devices will work either way, I have a smart battery(*)
+ that requires repeated start, and someone at some point found a
+ device that required a stop-start.
+
+ (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 3429071700963ca2f944c51d695a7481af0cee33
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 22:07:14 2009 +0100
+
+ {delta,zylonite}/lowlevel_init.S: fix typo
+
+ Commit 9d803d8c mistakenly changed some constants
+ from 0x300 into 300 - this patch fixes it.
+
+ Pointed out by Tom Evans <tom@ceos.com.au>, see
+ http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
+ details.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1bc434373013af241835c14011ac3f291dccbf53
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sat Dec 20 19:40:41 2008 +0100
+
+ drivers/net/e1000.c: missing terminator for supported devices
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+
+commit 65f7d41031a70b1649b35020995c505edca91533
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 21:36:28 2009 +0100
+
+ fat.c: fix warning: array subscript is above array bounds
+
+ Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 107b801cf3fe39612d69d70581ebc3bf5e215554
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 15:11:41 2009 +0100
+
+ Fix gunzip in case of insufficient output buffer
+
+ U-Boot's gunzip() function does not handle the return code
+ of zlib's inflate() function correctly. gunzip() is implemented
+ to uncompress all input data in one run. So the correct return
+ code for the good case is Z_STREAM_END. In case of insufficient
+ output buffer memory inflate returns Z_OK. For gunzip() this
+ is an error.
+
+ It also makes sense to me to call inflateEnd() also in case
+ of an error.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:25:01 2009 +0100
+
+ MIPS: Add VCT board series support (Part 3/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ae691e5719c48f1d2826cb72722497d1d162765b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:49 2009 +0100
+
+ MIPS: Add VCT board series support (Part 2/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:39 2009 +0100
+
+ MIPS: Add VCT board series support (Part 1/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:20:20 2009 +0100
+
+ MIPS: Add flush_dcache_range() and invalidate_dcache_range()
+
+ This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
+ Those functions are needed for the upcoming dcache support for the USB
+ EHCI driver. I chose this API because those cache handling functions are
+ already present in the PPC architecture.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit de832a99414ff06a4b2cdc9f5280b387da039834
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:05:20 2009 +0100
+
+ nand_spl: Fix compile problem with board_nand_init() prototype
+
+ This patch removes the now obsolete and additionally wrongly defined
+ board_nand_init() prototype from nand_spl/nand_boot.c.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e8eac437189430d8e04a5d254ed92c58bc534a79
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jan 14 08:44:26 2009 -0500
+
+ CFI: Add geometry reversal for STMicro M29W320ET
+
+ Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
+
+ Modeled after flash_fixup_amd, this patch handles the geometry reversal
+ or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
+ Since I cannot test all STM's chips, the detection is implemented as
+ narrow as possible for now.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0f8e851e897b535959a0781171910cd97f33c30c
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:55 2008 +0100
+
+ CFI: increase performance of function find_sector()
+
+ Tested on TQM5200S-BD with Samsung K8P2815UQB
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:54 2008 +0100
+
+ CFI: avoid redundant function call in single word programming mode
+
+ The function find_sector() doesn't need to be called twice in
+ the case of AMD command set.
+ Tested on TQM5200S-BD with Samsung K8P2815UQB.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:15:23 2009 +0100
+
+ ppc4xx: Remove compilation warning in gdppc440etc.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:19:47 2009 +0100
+
+ ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
+
+ Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
+ Either they define or undef it. Because it's not used in any source
+ files this patch removes any references to it.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 13:12:40 2008 +0100
+
+ ppc4xx: Add GDsys PowerPC 440 ETX board support.
+
+ Board support for the Guntermann & Drunck PowerPC 440 ETX module.
+ Based on the AMCC Yosemite board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 11:00:07 2008 +0100
+
+ ppc4xx: Improve DDR autodetect
+
+ Added support for a second memory bank to DDR autodetection for 440
+ platforms.
+ Made hardcoded values configurable.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71a040f4f556cca4d30f06805d82e717b3ef1020
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:06:26 2008 +0900
+
+ sh: sh7763rdp: Update sh7763rdp config
+
+ Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 12:28:38 2008 +0100
+
+ mgcoge make ether_scc.c work with CONFIG_NET_MULTI
+
+ This change is needed for mgcoge because it uses two ethernet drivers.
+
+ Add a check for the presence of the PIGGY board on mgcoge. Without this
+ board networking cannot work and the initialization must be aborted.
+
+ Only allocate rtx once to prevent DPRAM exhaustion.
+
+ Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
+ soon) in eth.c.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:04:18 2008 +0900
+
+ sh: sh_eth: Change new network API
+
+ sh_eth used old network API. This patch changed new API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:31:02 2008 +0100
+
+ net: smc911x: Make register read/write functions weak
+
+ This patch changes the reg_read/_write to smc911x_reg_read/_write
+ and defines then as weak so that they can be overridden by board
+ specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8b69b563039989885969d24465c56f8ac4c07c4c
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:14 2008 +0100
+
+ powerpc: net: support for the SMSC LAN8700 PHY
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5254f149da9e6cd649d887b042ce577ef3ba78d
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Jan 24 18:10:37 2009 +0100
+
+ Initial support for Nomadik 8815 development board
+
+ The NMDK8815 board is distributed by ST Microelectornics.
+ Other (proprietary) code must be run to unlock the CPU before
+ U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
+
+ This is the initial port, with basic infrastructure and
+ a working serial port.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:18 2008 +0100
+
+ OMAP3: Add I2C support
+
+ Add I2C support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:17 2008 +0100
+
+ OMAP3: Add MMC support
+
+ Add MMC support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 12201a13547ec22ddcdae278e74465e54a3be60c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:16 2008 +0100
+
+ OMAP3: Add NAND support
+
+ Add NAND support.
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 91eee546737ae21d930af479530997174c342b13
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:15 2008 +0100
+
+ OMAP3: Add common board, interrupt and system info
+
+ Add common board, interrupt and system info code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:14 2008 +0100
+
+ OMAP3: Add common clock, memory and low level code
+
+ Add common clock, memory and low level code
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 0b02b184003e6a5023e05d5f31de54db279b1431
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:13 2008 +0100
+
+ OMAP3: Add common cpu and start code
+
+ Add common cpu and start code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit a8b6450546cd507d331b8fde384791d84bde5651
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:12 2008 +0100
+
+ OMAP3: Add OMAP3, memory and function prototype headers
+
+ Add OMAP3, memory and function prototype header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 2c803210a464abbac35752ca1c737514360b4c32
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:11 2008 +0100
+
+ OMAP3: Add pin mux, clock and cpu headers
+
+ Add pin mux, clock and cpu header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 685533646f4ff17a84ec9265cabb60af325b6e1f
+Author: Maxim Artamonov <scn1874@yandex.ru>
+Date: Wed Dec 3 05:38:17 2008 +0300
+
+ bugfix for i.mx31 CCM_UPCTL reg
+
+ Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
+
+commit 24113a44ed5cd3257a0237c3961e121812fca6db
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 03:15:38 2008 -0500
+
+ easylogo: add optional gzip support
+
+ Some images can be quite large, so add an option to compress the
+ image data with gzip in the U-Boot image. Then at runtime, the
+ board can decompress it with the normal zlib functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Fri Jan 2 20:47:45 2009 -0500
+
+ fat: fix unaligned errors
+
+ A couple of buffers in the fat code are declared as an array of bytes.
+ But it is then cast up to a structure with 16bit and 32bit members.
+ Since GCC assumes structure alignment here, we have to force the
+ buffers to be aligned according to the structure usage.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
+Author: Brad Bozarth <bflinux@yumbrad.com>
+Date: Thu Jan 1 22:45:47 2009 -0500
+
+ spi flash: fix crash due to spi flash miscommunication
+
+ Higher spi flash layers expect to be given back a pointer that was
+ malloced so that it can free the result, but the lower layers return
+ a pointer that is in the middle of the malloced memory. Reorder the
+ members of the lower spi structures so that things work out.
+
+ Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sat Dec 20 14:54:21 2008 +0300
+
+ FPU POST: fix warnings when building with 2.18 binutils
+
+ When compile u-boot with the 2.18 binutils the following
+ warning messages for each object file in post/lib_ppc/fpu/ is
+ produced at the linking stage:
+
+ post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
+ ...
+
+ This is because of the fact that, in general, the soft-float and
+ hard-float ABIs are incompatible; the 2.18 binutils do checking
+ of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
+ produce the worning like above if these are not compatible.
+
+ The incompatibility of ABIs is concerned only the float values:
+ e.g. the soft-float ABI assumes the float argument passing in the
+ pair of rX registers, and the hard-float ABI assumes passing of
+ the float argument in the fX register. When we don't pass the float
+ arguments between the functions compiled with different floatness,
+ then such an application will work correctly.
+ This is the case for the FPU POST: u-boot (compiled with soft-float)
+ doesn't pass to (and doesn't get from) the FPU POST functions any
+ floats; there are no functions exported from the post/lib_ppc/fpu/
+ objects which would work with float parameters/returns too. So, we
+ can reassure the linker not to worry about the difference in ABI
+ attributes of linking files just by setting the 'soft-float'
+ attribute for the objects in post/lib_ppc/fpu. And this patch does
+ this.
+
+ Also, to avoid passing both soft- and hard-float options in CFLAGS
+ when compiling the files from post/lib_ppc/fpu (which is OK, but
+ looks rather dirty) this patch removes the soft-float string from
+ CFLAGS in post/lib_ppc/fpu/Makefile.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a7c9310457e85b4598abe5b304108edf11332e2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:22 2008 -0600
+
+ Add support for Maxim's DS4510 I2C device
+
+ Initial support for the DS4510, a CPU supervisor with
+ integrated EEPROM, SRAM, and 4 programmable non-volatile
+ GPIO pins. The CONFIG_DS4510 define enables support
+ for the device while the CONFIG_CMD_DS4510 define
+ enables the ds4510 command. The additional
+ CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
+ CONFIG_DS4510_RST defines add additional sub-commands
+ to the ds4510 command when defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 16 14:51:56 2008 +0100
+
+ common: Iteration limit for memory test.
+
+ The iteration limit is passed to mtest as a fourth parameter:
+ [start [end [pattern [iterations]]]]
+ If no fourth parameter is supplied, there is no iteration limit and the
+ test will loop forever.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+
+commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 15 15:40:12 2008 +0100
+
+ serial: Rename driver vcth to vct to support other board variants
+
+ Moved driver vcth.c to vct.c to better reflect the VCT board series.
+ This driver is now used by the VCT platforms:
+
+ vct_premium
+ vct_platinum
+ vct_platinumsvc
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Dec 12 00:45:27 2008 +0900
+
+ nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c3284b030b1cd492b4f46c576aea01bef258599d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Dec 10 16:24:16 2008 +0100
+
+ common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
+
+ Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
+ similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
+ !CONFIG_AUTOBOOT_KEYED case.
+
+ Do this by reversing the loop so we do at least one iteration before
+ checking for timeout.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Dec 8 17:24:08 2008 +0100
+
+ Added legacy flash ST Micro M29W040B
+
+commit 626d07348e5f9f302f4ea182161a89f7362a0488
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Mon Dec 8 20:04:51 2008 +1100
+
+ Fixed off-by-one errors in lib_m68k/interrupts.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a5989c42ae5e295f274a795c426c47819bbdbfda
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:05 2008 +1100
+
+ Removed all references to CONFIG_SYS_RESET_GENERIC
+
+ Generic i386 reset - #define made redundant by weak function
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:04 2008 +1100
+
+ Remove #ifdef CONFIG_SC520 in source code
+
+ CONFIG_SC520 is now used for conditional compile
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit ead056bc206f6b7ee6dc98766678b64635ea20b8
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:03 2008 +1100
+
+ Added MMCR reset functionality
+
+ Reset function specific to AMD SC520 microcontroller - Is more of a
+ 'hard reset' that the triple fault.
+
+ Requires CONFIG_SYS_RESET_SC520 to be defined in config
+
+ I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
+ but ld requires that a object file in a library arhive MUST contain
+ at least one function which does not override a weak function (and is
+ called from outside the object file) in order for that object file to
+ be extracted from the archive. This would be the only function on the
+ new file, and hence, will never get linked in.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:02 2008 +1100
+
+ Moved generic (triple fault) reset code
+
+ Moved from interrupts.c to cpu.c and made into a weak function to
+ allow vendor specific override
+
+ Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
+ added to the vendor specific code without the need to remember to
+ #undef usage of the generic method and if you forget to include your
+ custom reset method, you will always get the default.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 9933d609020c297788f53f334c8465fa7a99b10c
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:01 2008 +1100
+
+ Moved definition of set_vector() to new header file
+
+ This allows for future tidy ups and functionality that will require
+ set_vector ()
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 407976185e0dda2c90e89027121a1071b9c77bfb
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:00 2008 +1100
+
+ Moved sc520 specific code into new cpu/i386/sc520 folder
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85ffbbd51914925a542d8528be7f072e5ab02157
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:58 2008 +1100
+
+ Renamed cpu/i386/reset.S to resetvec.S
+
+ Brings i386 in line with other CPUs with a reset vector and frees up reset.c
+ for CPU reset functions
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a3f4c123f569474e80ea012b8db0de46afdb6443
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 24 01:01:49 2009 +0100
+
+ Makefile: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c620c01e96814558470698ed5cab1bf2f504d1b5
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:57 2008 +1100
+
+ Added initial eNET board support
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 11:37:26 2008 +0100
+
+ POWERPC 82xx: add the SCC as an HDLC controller
+
+ Right now this is only used by keymile.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 210c8c00aad3328145204adab434bb7d70b06b75
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit de0443614af4d16675ab436665aeb11ddc9f7214
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Nov 4 13:51:18 2008 +0100
+
+ Add a do_div() wrapper macro, lldiv().
+
+ Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
+ the dividend and returns the result of division, so it is useful
+ in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:14 2009 -0600
+
+ 85xx: Add a 36-bit physical configuration for MPC8572DS
+
+ We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
+ to allow for larger memory sizes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:13 2009 -0600
+
+ 85xx: Handle eLBC difference w/36-bit physical
+
+ The eLBC only handles 32-bit physical address in systems with 36-bit
+ physical. The previos generation of LBC handled 34-bit physical
+ address in 36-bit systems. Added a new CONFIG option to convey
+ the difference between the LBC and eLBC.
+
+ Also added defines for XAM bits used in LBC for the extended 34-bit
+ support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:12 2009 -0600
+
+ 85xx: Use BR_ADDR macro for NAND chipselects
+
+ Use the new BR_ADDR macro to properly setup the address field of the
+ localbus chipselects used by NAND.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jan 15 11:58:35 2009 -0500
+
+ Add secondary CPUs processor frequency for e500 core
+
+ This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
+ and prints each CPU's frequency separately. It also fixes up each CPU's
+ frequency in "clock-frequency" of fdt blob.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit bf5b1f0c0d28ce062e1d368680632dfb099de692
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:53 2008 +0800
+
+ 85xx: enable the auto self refresh for wake up ARP
+
+ The wake up ARP feature need use the memory to process
+ wake up packet, we enable auto self refresh to support it.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:43 2008 +0800
+
+ fsl-ddr: use the 1T timing as default configuration
+
+ For light loaded system, we use the 1T timing to gain better
+ memory performance, but for some heavily loaded system,
+ you have to add the 2T timing options to board files.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22cca7e1cd54590e967c73558b07ffbdccd39504
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:35 2008 +0800
+
+ fsl-ddr: make the self refresh idle threshold configurable
+
+ Some 85xx processors have the advanced power management feature,
+ such as wake up ARP, that needs enable the automatic self refresh.
+
+ If the DDR controller pass the SR_IT (self refresh idle threshold)
+ idle cycles, it will automatically enter self refresh. However,
+ anytime one transaction is issued to the DDR controller, it will
+ reset the counter and exit self refresh state.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:29 2008 +0800
+
+ fsl-ddr: clean up the ddr code for DDR3 controller
+
+ - The DDR3 controller is expanding the bits for timing config
+ - Add the DDR3 32-bit bus mode support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:22 2008 +0800
+
+ fsl-ddr: update the bit mask for DDR3 controller
+
+ According to the latest 8572 UM, the DDR3 controller
+ is expanding the bit mask, and we use the extend ACTTOPRE
+ mode when tRAS more than 19 MCLK.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit aca5f018a8386b85469482ed9867e3e29a2437d0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:40 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ IO space is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:39 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ memory is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a6e04c344ad1eefd47a75484441b385da815b8df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:38 2008 -0600
+
+ 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
+
+ Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
+ of TLBs. This is what we should have always been using from the start.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:37 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
+
+ Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
+ of _IO_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 10795f42cb94e71bcb262b615084f69dd886399a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:36 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
+
+ Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
+ of _MEM_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:34 2008 -0600
+
+ 85xx: separate FLASH BASE virtual from physical address
+
+ Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
+ maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 52b565f5ad23b682489055b187767d8bf1c2e444
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:33 2008 -0600
+
+ 85xx: separate PIXIS virtual from physical address
+
+ Added a PIXIS_BASE_PHYS for use as the physical address and maintain
+ PIXIS_BASE as the virtual address of the PIXIS fpga registers.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 30837e5b21d5a742983581ab9ee3fac085311d19
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Nov 11 08:52:09 2008 -0500
+
+ Add README file for MPC8572DS board
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 16:15:04 2008 -0400
+
+ Blackfin: use common strmhz() in system output
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5bb907a4925397789c90d074f4f7e92ce6b39402
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Thu Jan 22 15:05:24 2009 -0800
+
+ mpc83xx: New board support for SIMPC8313
+
+ This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
+ board boots from NAND devices and is configureable for either large or small
+ page devices. The board supports non-soldered DDR2, one ethernet port, a
+ Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
+ to the eLBC providing glue logic to a TMS320C67xx DSP.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jan 18 19:46:06 2009 -0500
+
+ nand: fixup printf modifiers to match types used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 389e6620e2271096df3316917528003627db4021
+Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
+Date: Tue Jan 20 16:57:55 2009 +0100
+
+ nand read.jffs2 (nand_legacy) in common/cmd_nand.c
+
+ Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
+ With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
+ "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
+ tested before ".jffs2s" and only the first two characters are compared.
+
+ Correction:
+ Test for ".jffs2s" first and compare the first 7 characters.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Fri Jan 16 18:55:54 2009 +0100
+
+ NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
+
+ This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
+ changes the default from 8 to 1 for the legacy and the new MTD
+ NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
+ in the board config files because none of the boards use multi
+ chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
+ define
+
+ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
+ but that's bogus and did not work anyhow.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c70564e6b1bd08f3230182392238907f3531a87e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 2 11:48:51 2008 +0800
+
+ NAND: Fix cache and memory inconsistency issue
+
+ We load the secondary stage u-boot image from NAND to
+ system memory by nand_load, but we did not flush d-cache
+ to memory, nor invalidate i-cache before we jump to RAM.
+ When the system has cache enabled and the TLB/page attribute
+ of system memory is cacheable, it will cause issues.
+
+ - 83xx family is using the d-cache lock, so all of d-cache
+ access is cache-inhibited. so you can't see the issue.
+ - 85xx family is using d-cache, i-cache enable, partial
+ cache lock. you will see the issue.
+
+ This patch fixes the cache issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 50657c273278f74378e1ac39b41d612b92fdffa0
+Author: Nishanth Menon <menon.nishanth@gmail.com>
+Date: Sat Dec 13 09:43:06 2008 -0600
+
+ NAND: Enable nand lock, unlock feature
+
+ Enable nand lock, unlock and status of lock feature.
+ Not every device and platform requires this, hence,
+ it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
+
+ Nand unlock and status operate on block boundary instead
+ of page boundary. Details in:
+ http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
+
+ Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
+ Includes preliminary suggestions from Scott Wood
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:40:55 2008 -0500
+
+ NAND: move board_nand_init to nand.h
+
+ Rather than putting the function prototype for board_nand_init() in the one
+ place where it gets called, put it into nand.h so that every place that also
+ defines it gets the prototype. Otherwise, errors can go silently unnoticed
+ such as using the wrong return value (void rather than int) when defining
+ the function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1ae39862044ebb1e682234b51f94421e3f871d6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 11:06:47 2008 +0100
+
+ OneNAND: Additional sync with 2.6.27
+
+ - Add subpage write support
+ - Add onenand_oob_64/32 ecclayout
+
+ This has been missing and without it UBI has some incompatibilies issues
+ with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
+ placed differently (2048 instead of 512) without this fix.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Thu Nov 13 15:14:33 2008 +0900
+
+ Add markbad function
+
+ Add missing markbad function
+ If not, it's hang when it entered the mtd->mark_bad().
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:47:24 2008 +0100
+
+ OneNAND: Bad block aware read/write command support
+
+ Update OneNAND command to support bad block awareness.
+ Also change the OneNAND command style to better match the
+ NAND version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:29:09 2008 +0100
+
+ OneNAND: Save version_id in onenand_chip struct
+
+ The version (ver_id) was not stored in the onenand_chip structure and
+ because of this the continuous locking scheme could be enabled on some
+ chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:28:53 2008 +0100
+
+ OneNAND: Fix compiler warnings
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Nov 4 14:55:06 2008 +0800
+
+ mpc83xx: enable eLBC NAND support for MPC8315ERDB board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Nov 4 09:24:07 2008 +0900
+
+ Sync with 2.6.27
+
+ Sync with OneNAND kernel codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit e7f325be9edeb84bb457301776bbac1f7257dafc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:35:31 2009 +0100
+
+ microblaze: Use cache functions (especially cache status)
+ in systems which are configured without flash
+
+commit e9b737deb2c30125362d20e24170617476026e94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:29:32 2009 +0100
+
+ microblaze: Add cache flush
+
+commit b4f8dda35bfad447b4106828232705b2e878d168
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:28:40 2009 +0100
+
+ microblaze: Add bootup messages to board.c
+
+commit 330e55459bc9983341da6c1d5c7fe00a664436fe
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:25:55 2008 +0100
+
+ microblaze: Change microblaze-generic config file
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:14:05 2008 +0100
+
+ microblaze: Rename ml401 to microblaze-generic
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6677876181cc8772bca8a372479a500d160f3993
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Jan 20 11:56:11 2009 -0600
+
+ 83xx: Use the proper sequence for updating IMMR.
+
+ This ensures that subsequent accesses properly hit the new window.
+
+ The dcbi during the NAND loop was accidentally working around this;
+ it's no longer necessary, as the cache is not enabled.
+
+ Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8b34557c546e5e9f34ebf83c93413dad973d93df
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:19 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC837XEMDS boards
+
+ MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
+ provides two PCI-E (x2) ports. Though, only one port can be used in x2
+ mode. Two ports can function simultaneously in x1 mode.
+
+ PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f11e34b31a7be124a3239653f33af9510502045
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:17 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC8315ERDB boards
+
+ MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
+ support them.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:12 2009 +0300
+
+ mpc83xx: Add support for MPC83xx PCI-E controllers
+
+ This patch adds support for MPC83xx PCI-E controllers in Root Complex
+ mode.
+
+ The patch is based on Tony Li and Dave Liu work[1].
+
+ Though unlike the original patch, by default we don't register PCI-E
+ buses for use in U-Boot, we only configure the controllers for future
+ use in other OSes (Linux). This is done because we don't have enough
+ of spare BATs to map all the PCI-E regions.
+
+ To actually use PCI-E in U-Boot, users should explicitly define
+ CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
+ only then U-Boot will able to access PCI-E, but at the cost of disabled
+ address translation.
+
+ [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:33:17 2009 -0800
+
+ MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
+
+ When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
+ not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
+ "Clocking in PCI Agent Mode".
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 75f35209f702bb26826855ed8c8e4d108ab5f412
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:32:26 2009 -0800
+
+ 83xx: PCI agent mode fixes for multi-board systems
+
+ When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
+ the boards will lock up the PCI bus by scanning against each other.
+
+ The boards lock against each other by trying to access the PCI bus before
+ clearing their configuration lock bit. Both boards end up in a loop,
+ sending and receiving "Target Not Ready" messages forever.
+
+ When running in PCI agent mode, the scanning now takes place after the
+ boards have cleared their configuration lock bit.
+
+ Also, add a missing declaration to the mpc83xx.h header file, fixing a
+ build warning.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 455a46915b82896cc2070eb326d075555c2bc580
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Fri Dec 12 13:12:45 2008 -0800
+
+ mpc83xx: Size optimization of start.S
+
+ Currently there are in excess of 100 bytes located at the beginning of the image
+ built by start.S that are not being utilized. This patch moves a few functions
+ into this part of the image. This will create a greater number of *available*
+ bytes that can be used by board specific code in NAND builds and will decrease
+ the size of the assembled code in other builds.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 21 23:08:12 2009 +0100
+
+ Prepare v2009.01
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 635e5f8fc82365e6e9734b3132bc95135a6de679
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 18 21:37:48 2009 +0100
+
+ Prepare 2009.01-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4cda437898f7873752f0201757cd33f12196ce87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Jan 17 13:32:42 2009 -0500
+
+ build system: treat all Darwin's alike
+
+ The x86 based version of Darwin behaves the same quirky way as the powerpc
+ Darwin, so only check HOSTOS when setting up Darwin workarounds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c088a108c75db565e07292fd668dfa5491e85bc2
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Jan 14 13:52:24 2009 +0100
+
+ fdt_resize(): fix actualsize calculations with unaligned blobs
+
+ The code in fdt_resize() to extend the fdt size to end on a page boundary
+ is wrong for fdt's not located at an address aligned on a page boundary.
+ What's even worse, the code would make actualsize shrink rather than grow
+ if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
+ causing fdt_add_mem_rsv to fail.
+
+ Fix it by aligning end address (blob + size) to a page boundary instead.
+ For aligned fdt's this is equivalent to what we had before.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit fadad1573fb16c90025f08a2861d6047d093cba7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jan 9 04:38:17 2009 -0500
+
+ ncb: use socklen_t
+
+ The recvfrom() function takes a socklen_t, not an int.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:16 2009 +0100
+
+ sh: serial: use readx/writex accessors
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e1fa628bdb64745811cdd26c4f953846c076180
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:15 2009 +0100
+
+ sh: serial: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c9935c992575922b7ef13eec0656ed8665d324e3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Jan 11 17:48:56 2009 +0900
+
+ sh: Fix compile error on lowlevel_init file
+
+ lowlevel_init of SH was corrected to use the write/readXX macro.
+ However, there was a problem that was not able to be compiled partially.
+ This patch corrected this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a5b04d00bfeb940c62232972ce644d50b45797f9
+Author: Kieran Bingham <kieranbingham@gmail.com>
+Date: Tue Dec 30 01:16:03 2008 +0000
+
+ sh: Fix up rsk7203 target for out of tree build
+
+ Fix up rsk7203 target to build successfully using out-of-tree build.
+
+ Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f7e78f3b74aae9caca2997bad865a72338326c0a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:49 2008 +0100
+
+ sh: use write{8,16,32} in all lowlevel_init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e4430779623af500de1cee7892c379f07ef59813
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:48 2008 +0100
+
+ sh: lowlevel_init coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:27:45 2008 +0100
+
+ sh: update sh2/sh2a timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1e15ff999322e81af4c0c0c548908f38944ba39c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:25:22 2008 +0100
+
+ sh: update sh timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0e3ece33801e377be67ffa29f083421ad820f28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 23:26:05 2009 +0100
+
+ Prepare 2009.01-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e92c9a860e44c14513c8909ce4299e253a775eeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 22:35:30 2009 +0100
+
+ cpu/mpc824x/Makefile: fix warning with parallel builds
+
+ Parallel builds would occasionally issue this build warning:
+
+ ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
+
+ Use "ln -sf" as quick work around for the issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ba605d4beec649438539e7df97b5fedb26592fb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:49 2009 +0100
+
+ ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
+
+ This patch adds esd's loadpci BSP command to CPCI4052 and
+ CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 600fe46fb3dab7f07604f9009904f31584415114
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:12 2009 +0100
+
+ ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6a1f490d224c600a09137e58d1026d150b8e679
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:17:36 2009 +0100
+
+ ppc4xx: Cleanup CPCI405 board code
+
+ This patch cleans up CPCI405 board support:
+ - wrap long lines
+ - unification of spaces in function calls
+ - remove dead code
+
+ Use correct io accessors on peripherals.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:16:35 2009 +0100
+
+ ppc4xx: Enable auto RS485 mode on PLU405 boards
+
+ This patch turns on the auto RS485 mode in the 2nd external
+ uart on PLU405 boards. This is a special mode of the used
+ Exar XR16C2850 uart. Because these boards only have a 485 physical
+ layer connected it's a good idea to turn it on by default.
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:28 2009 -0500
+
+ Some changes of TLB entry setting for MPC8572DS
+
+ - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
+ all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
+ can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
+
+ - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 950264317eb9594b2b5ee2fb65206200a1c6007a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:22 2009 -0500
+
+ Change DDR tlb start entry to CONFIG param for 85xx
+
+ So that we can locate the DDR tlb start entry to the value other than 8. By
+ default, it is still 8.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:02:35 2009 +0800
+
+ Change PCIE1&2 deciide logic on MPC8544DS board more readable
+
+ The IO port selection for MPC8544DS board:
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ This patch changes the PCIE12 and PCIE2 logic more readable.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:01:52 2009 +0800
+
+ PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
+
+ PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
+ PCIE1 bit.
+ On MPC8572DS board, PCIE refers to PCIE1.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:00:55 2009 +0800
+
+ Fix IO port selection issue on MPC8544DS and MPC8572DS boards
+
+ The IO port selection is not correct on MPC8572DS and MPC8544DS board.
+ This patch fixes this issue.
+ For MPC8572
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
+ PCIE2 0x3, 0x7
+ PCIE3 0x7
+
+ For MPC8544
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:44 2008 -0600
+
+ mpc8610hpcd: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 79e436cad3b4a7db88408c3f05175028f30d700d
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:26 2008 -0600
+
+ sbc8641d: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jan 12 14:50:35 2009 +0100
+
+ MPC86xx: fix build warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 032a1c934ef4dc003281f57302b6e693062c1868
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 5 16:09:44 2009 -0500
+
+ bf537-stamp/nand: fix board_nand_init prototype
+
+ The board_nand_init() function should return an int, not void.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 687f952e4119594ab913be11c90f7f018c2a7a79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 07:04:48 2008 -0500
+
+ Blackfin: drop CONFIG_SPI handling in board init
+
+ The eeprom SPI init functions are duplicated as the common code already
+ executes these for us.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e7e684b10d73a303902208594c7c3e7e0d753282
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:51:57 2008 -0400
+
+ Blackfin: fix out-of-tree building with ldscripts
+
+ Many of the Blackfin board linker scripts are preprocessed, so make sure we
+ output the linker script into the build tree rather than the source tree.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:48:54 2008 -0400
+
+ Blackfin: fix linker scripts to work with --gc-sections
+
+ Make sure all .text sections get pulled in and the entry point is properly
+ referenced so they don't get discarded when linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:45:44 2008 -0400
+
+ Blackfin: set proper LDRFLAGS for parallel booting LDRs
+
+ In order to boot an LDR out of parallel flash, the ldr utility needs a few
+ flags to tell it to generate the right header.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:41:59 2009 +0100
+
+ at91rm9200: move define from lowlevel_init to header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a48686fac2030287765f1970ea046bd5734b733
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:26 2009 +0100
+
+ m501sk: move to the common memory setup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d481c80d78f954133c035dae6c7d22de3625795d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:25 2009 +0100
+
+ at91rm9200: rename lowlevel init value to CONFIG_SYS_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Tue Jan 6 21:13:14 2009 +0100
+
+ at91: add at91sam9xeek board support
+
+ At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
+ it as another entry for at91sam9260 in the Makefile.
+
+ Check documentation at :
+ http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:15:57 2009 +0100
+
+ fix bmp_logo.h make dependencies to allow parallel build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e12d9a8fb48d24176efffccc072b445e60a3afe4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:24 2009 +0100
+
+ at91: Fix Atmel's at91sam9 boards out of tree build
+
+ introduced in commit 89a7a87f084c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0668236bafaa1c11c521652a2facebc74beecbf0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 30 22:56:11 2008 +0100
+
+ README: update mailing list name and hits to patch submission.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:01 2008 -0600
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:00 2008 -0600
+
+ XPedite5200 board support cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 21:58:04 2008 +0100
+
+ usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:37 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in sysinfo and gd
+
+ Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
+ and print it out, but don't save it.
+
+ This changes where its calculated and stored to be more consistent with the
+ CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
+
+ The localbus frequency is added to sysinfo and calculated when sysinfo is
+ set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
+
+ get_clocks() copies the frequency into the global data, as the other
+ frequencies are, into a new field that is only enabled for MPC85xx and
+ MPC86xx.
+
+ checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
+ from sysinfo, like the other frequencies, instead of calculating it on the
+ spot.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:36 2008 -0800
+
+ mpc86xx: Double local bus clock divider
+
+ The local bus clock divider should be doubled for both 8610 and 8641.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 446c381e3e16f19857b72ea0d06241267b8b9d58
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:35 2008 -0800
+
+ mpc8568: Double local bus clock divider
+
+ The clock divider for the MPC8568 local bus should be doubled, like the
+ other newer MPC85xx chips.
+
+ Since there are now more chips with a 2x divider than a 1x, and any new
+ 85xx chips will probably be 2x, invert the sense of the #if so that it
+ lists the 1x chips instead of the 2x ones.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 16 12:09:27 2008 +0800
+
+ 85xx: Fix the boot window issue
+
+ If one custom board is using the 8MB flash, it is set
+ as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
+ The current start.S code will be broken at switch_as.
+
+ It is because the TLB1[15] is set as 16MB page size,
+ EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
+
+ For the 8MB flash case, the EPN = 0xefxxxxxx,
+ RPN = 0xffxxxxxx. Assume the virt address of switch_as
+ is 0xef7ff18c, the real address of the instruction at
+ switch_as should be 0xff7ff18c. the 0xff7ff18c is out
+ of the range of the default 8MB boot LAW window
+ 0xff800000 - 0xffffffff.
+
+ So when we switch to AS1 address space at switch_as,
+ the core can't fetch the instruction at switch_as any
+ more. It will cause broken issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 58da8890d5fbd074746037722a423de9ac408616
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:50 2008 -0500
+
+ sbc8548: use proper PHY address
+
+ The values given for the PHY address were wrong, so the code
+ read no valid PHY ID, and fell through to the generic PHY
+ support, which would work on 1000M but would not auto negotiate
+ down to 100M or 10M.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:51 2008 -0500
+
+ sbc8548: enable command line editing by default.
+
+ Lets make things a bit more user friendly. It isn't 1985 anymore.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:49 2008 -0500
+
+ sbc8548: don't enable the 3rd and 4th eTSEC
+
+ These interfaces don't have usable connectors on the board, so don't
+ bother enumerating or configuring them.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 181a3650113883728927928b3ac81ad6dade4b2c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Dec 3 10:08:19 2008 -0500
+
+ Set IVPR to kenrel entry point in second core boot page
+
+ Assuming the OSes exception vectors start from the base of kernel address, and
+ the kernel physical starting address can be relocated to an non-zero address.
+ This patch enables the second core to have a valid IVPR for debugger before
+ kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
+ value for second core which runs kernel at different physical address other
+ than 0x0.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit a5d212a263c58cc746481bf1fc878510533ce7d6
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:34 2008 -0800
+
+ mpc8xxx: LCRR[CLKDIV] is sometimes five bits
+
+ On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
+ instead of four.
+
+ In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
+ should be safe as the fifth bit was defined as reserved and set to 0.
+
+ Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 58ec4866ed916c7e422f5107bb27b0822084728e
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:38 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in device tree
+
+ Export the localbus frequency in the device tree, the same way the CPU, TB,
+ CCB, and various other frequencies are exported in their respective device
+ tree nodes.
+
+ Some localbus devices need this information to be programed correctly, so
+ it makes sense to export it along with the other frequencies.
+
+ Unfortunately, when someone wrote the localbus dts bindings, they didn't
+ bother to define what the "compatible" property should be. So it seems no
+ one was quite sure what to put in their dts files.
+
+ Based on current existing dts files in the kernel source, I've used
+ "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
+ of the 85xx devices, and are looked for by the Linux code. The eLBC is
+ apparently not entirely backward compatible with the pq3 LBC and so eLBC
+ equipped platforms like 8572 won't use pq3-localbus.
+
+ For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
+ and is also looked for by the Linux code. On MPC8641, I've also used
+ "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
+ which don't use "fsl,elbc" or any other acceptable name to match on.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:22 2008 -0600
+
+ NAND FSL elbc: Use virt_to_phys to determine which bank is in use
+
+ The current code that determines which bank/chipselect is used for a
+ given NAND instance only worked for 32-bit addresses and assumed
+ a 1:1 mapping. This breaks in 36-bit physical configs.
+
+ The proper way to handle this is to use the virt_to_phys() and
+ BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
+ with the the virtual address the NAND code uses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 77c8115b1f1871811633eae77a5a700fac1f0e50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:21 2008 -0600
+
+ ppc: Use addrmap in virt_to_phys and map_physmem.
+
+ If we have addr map support enabled use the mapping functions to
+ implement virt_to_phys() and map_physmem().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:20 2008 -0600
+
+ 85xx: Add support to populate addr map based on TLB settings
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:13 2008 -0600
+
+ XPedite5200 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5200 -
+ a MPC8548-based PMC single board computer.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:27 2008 -0500
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards
+
+ Update X-ES Freescale boards to allow inbound PCI configuration
+ cycles when configured as agent/endpoint.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:23 2008 -0600
+
+ XPedite5370 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5370 -
+ a MPC8572-based 3U VPX single board computer with a PMC/XMC
+ site.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e92739d34e2d6b6aca93b2598248210710897ce8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:21 2008 -0600
+
+ Add support for PCA953x I2C gpio devices
+
+ Initial support for NXP's 4 and 8 bit I2C gpio expanders
+ (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
+ enables support for the devices while the CONFIG_CMD_PCA953X
+ define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
+ define enables an 'info' sub-command which provides summary
+ information for the given pca953x device.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7a8979591171676417ab36852d8811a8c46accd8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:26 2008 -0500
+
+ pci/fsl_pci_init: Enable inbound PCI config cycles
+
+ Add fsl_pci_config_unlock() function to enable a
+ PCI/PCIe interface configured in agent/endpoint mode to
+ respond to inbound PCI configuration cycles.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Dec 17 16:43:18 2008 +0100
+
+ avr32: Remove second definition of virt_to_phys()
+
+ The second definition introduced by 65e43a1063 conflicts with the
+ existing one.
+
+ Also, convert the existing definition to use phys_addr_t. The volatile
+ qualifier is still needed due to brain damage elsewhere.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b616f2b545f73757669b37386f0b37bb61fc6797
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 22:27:18 2008 +0200
+
+ MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:31 2008 +0100
+
+ MIPS: qemu_mips: update doc to use all disk and boot linux kernel
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 13095b2f07dacb1f863772266c1789d47a523a8a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:30 2008 +0100
+
+ MIPS: qemu_mips: move env storage just after u-boot
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aced78d852d0b009e8aaa1445af8cb40861ee549
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:48:27 2008 +0100
+
+ Prepare 2009.01-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:13:46 2008 +0100
+
+ include/configs/at91cap9adk.h: fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 45ca04f2377361593151d2d4da51f8ba4832d233
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 22:32:25 2008 +0100
+
+ board/trab/memory.c: Fix compile problems.
+
+ Apply changes from commit 44b4dbed to board/trab/memory.c, too.
+
+ Actually we'd need a major cleanup here - as it turns out,
+ board/trab/memory.c is more or less a verbatim copy of
+ post/drivers/memory.c ... but then, trab is EOL anyway,r
+ so this is not worth the effort.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff49ea8977b56916edd5b1766d9939010e30b181
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Dec 16 14:24:16 2008 -0600
+
+ NAND: Mark the BBT as scanned prior to calling scan_bbt.
+
+ Otherwise, recursion can occur if scan_bbt does not find a bad block
+ table, and tries to write one, and the attempt to erase the BBT area
+ causes a bad block check.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 584eedab66d0828f2d571a24b10526c4e65f547b
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Dec 11 05:51:57 2008 +0300
+
+ jffs2: include <linux/mtd/compat.h> instead of defining own min_t
+
+ Include <linux/mtd/compat.h> header for min_t definition instead of
+ providing our own one. Removes warnings in case of OneNAND support
+ enabled.
+
+ Although I thinks it's a bit silly to include <linux/mtd/compat.h>
+ just for min_t...
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b1ffecec37b57a59c139042267faac458e5324e9
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 23:04:37 2008 -0600
+
+ powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
+
+ Casting a pointer to a phys_addr_t when it's an unsigned long long
+ on a 32-bit system without first casting to a non-pointer type
+ generates a compiler warning. Fix this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 16:22:50 2008 +0100
+
+ trab: make trab_fkt standalone code independent of libgcc
+
+ Use our own local functions in lib_arm/ instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:44:06 2008 +0100
+
+ post/Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ ppc_4xxFP-objdump: string.o: File format not recognized
+ or
+ post/libpost.a(cpu.o): In function `cpu_post_test':
+ /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
+ or similar. We now make sure to run the 'postdeps" step before
+ attempting to build the specific POST libraries.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:41:02 2008 +0100
+
+ Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ include/autoconf.mk:212: *** missing separator. Stop.
+ Line numbers and affected boards were changing. Obviously some
+ Makefiles included autoconf.mk while it was still being written to.
+ As a fix, we now write to a temporary file first and then rename it,
+ so that it is really ready to use as soon as it appears.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 01:02:17 2008 +0100
+
+ Coding style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
Author: Mike Frysinger <vapier@gentoo.org>
Date: Thu Dec 11 18:39:08 2008 -0500
Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:26:31 2008 -0800
+
+ Fix compile error in building MBX860T.
+ Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
Author: Jerry Van Baren <gvb.uboot@gmail.com>
Date: Mon Nov 24 08:15:02 2008 -0500
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 58c696eed839af894e0265064669c402dc28b371
Author: Wolfgang Denk <wd@xpert.denx.de>
Date: Mon Nov 24 21:50:59 2008 +0100
Signed-off-by: Stelian Pop <stelian@popies.net>
+commit fed36ac5ae613773b6cd90e61e292c45440e10c8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
Author: Stefan Roese <sr@denx.de>
Date: Thu Nov 20 11:46:20 2008 +0100
projects / u-boot / blobdiff