======================================================================
-Changes since U-Boot 1.1.4:
+Changes for U-Boot 1.1.5:
======================================================================
+* Fix sequoia separate object direcory building problems.
+
+* Cleanup compile warnings. Prepare for release 1.1.5
+
+* Fix compile problem in include/configs/ep82xxm.h
+ (must have never been tested before!)
+
+* MCC200: Fix uninitialized variable problem in LCD driver
+
+* Add board/cpu specific NAND chip select function to 440 NDFC
+ Based on idea and implementation from Jeff Mann
+ Patch by Stefan Roese, 20 Oct 2006
+
+* Make 4xx bootup message shorter on 440EPx/GRx platforms
+ Patch by Stefan Roese, 18 Oct 2006
+
+* Add (preliminary) support for V38B board
+
+* PPC405EP: Add support for board configuration of CPC0_PCI register
+ This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
+ Patch by Tolunay Orkun, 07 Apr 2006
+
+* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
+ - Add configuration of Open Drain GPIO Output selection
+ - Add configuration of initial value of GPIO output pins
+ Patch by Tolunay Orkun, 07 Apr 2006
+
+* Fix spelling; minor code cleanup.
+
+* Fix JFFS2 compilation problem
+ Patch by Stefan Roese, 12 Oct 2006
+
+* Cleanup of NAND update patch (remove changelog from cmd_nand.c)
+ Patch by Guido Classen, 10 Oct 2006
+
+* Several improvements to the new NAND subsystem:
+ - JFFS2 related commands implemented in mtd-utils style
+ - Support for bad blocks
+ - Bad block testing commands
+ - NAND lock commands
+ Please take a look at doc/README.nand for more details
+ Patch by Guido Classen, 10 Oct 2006
+
+* Define IH_CPU_AVR32
+ Make it possible to generate AVR32 uImage files with mkimage and
+ make cmd_bootm recognize them.
+ Patch by Haavard Skinnemoen, 22 Sep 2006
+
+* Fix buffer overflow problem in ft_build.c
+ Patch by Fredrik Roubert, 09 Oct 2006
+
+* Make bootp implementation RFC3046 compliant
+ Patch by Joakim Larsson, 27 Jun 2006
+
+* TQM5200: perform POST memory test only on STK52xx carrier board.
+ (and then only if PSC6_3 is read as "1" when booting).
+ Patch by Martin Krause, 21 Jun 2006
+
+* Move "ar" flags to config.mk to allow for silent "make -s"
+ Based on patch by Mike Frysinger, 20 Jun 2006
+
+* Coding style cleanup
+
+* Add support for EP82xxM boards
+ Patch by Aaron Sells, 20 Jun 2006
+
+* Fix comments in include/ppc440.h
+ Patch by Martin Hicks, 16 Jun 2006
+
+* Update for CAM5200 board:
+ - Map in a additional chip selects CS4 and CS5.
+ - Modify the port configration, configure six UARTs and no PCI,
+ ATA and USB.
+ - Add custom flash driver to handle specific byte swapping
+
+* Fix TLB setup for Ocotea board
+ Patch by Stefan Roese, 30 Sep 2006
+
+* Fix reset problem in sequoia sdram init code
+ Patch by Stefan Roese, 23 Sep 2006
+
+* Disable autoboot abort for FO300 when silent mode is enabled
+ (according to S1 switch setting).
+
+* Cleanup examples binaries
+
+* Add support for AMCC Rainier PPX440GRx eval board
+ Patch by Stefan Roese, 13 Sep 2006
+
+* Add NAND environment support for PPC440EPx Sequoia NAND boot config
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Update NAND boot documentation
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Fix alignment problem in "mtdparts" command
+
+* Add documentation on the latest build environment extensions to
+ the README file.
+
+* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+
+* Fix LOG_DIR directory creation error.
+ Add support for automatic creation of BUILD_DIR directory.
+
+* Fix build problem cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix build problem with CPCI440
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Change Yellowstone to use CFI write buffer
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Add support for AMCC Sequoia PPC440EPx eval board
+ - Add support for PPC440EPx & PPC440GRx
+ - Add support for PPC440EP(x)/GR(x) NAND controller
+ in cpu/ppc4xx directory
+ - Add NAND boot functionality for Sequoia board,
+ please see doc/README.nand-boot-ppc440 for details
+ - This Sequoia NAND image doesn't support environment
+ in NAND for now. This will be added in a short while.
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix mkimage -l bug with multifile images on 64bit platforms
+ Patch by David Updegraff, 06 Sep 2006
+
* Fix build problems on sorcery board.
* Fix coldfire build problems.
* Fix tools/easylogo build error.
-
* Fixed problems on PRS200 board caused by adding splash screen on MCC200
* Extended README entry on coding style
projects / u-boot / blobdiff