--- /dev/null
+/* ---------------------------------------------------------------------------- */\r
+/* Atmel Microcontroller Software Support */\r
+/* SAM Software Package License */\r
+/* ---------------------------------------------------------------------------- */\r
+/* Copyright (c) 2015, Atmel Corporation */\r
+/* */\r
+/* All rights reserved. */\r
+/* */\r
+/* Redistribution and use in source and binary forms, with or without */\r
+/* modification, are permitted provided that the following condition is met: */\r
+/* */\r
+/* - Redistributions of source code must retain the above copyright notice, */\r
+/* this list of conditions and the disclaimer below. */\r
+/* */\r
+/* Atmel's name may not be used to endorse or promote products derived from */\r
+/* this software without specific prior written permission. */\r
+/* */\r
+/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */\r
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */\r
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */\r
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */\r
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */\r
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */\r
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */\r
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */\r
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */\r
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */\r
+/* ---------------------------------------------------------------------------- */\r
+\r
+#ifndef _SAMA5D2_ACC_COMPONENT_\r
+#define _SAMA5D2_ACC_COMPONENT_\r
+\r
+/* ============================================================================= */\r
+/** SOFTWARE API DEFINITION FOR Analog Comparator Controller */\r
+/* ============================================================================= */\r
+/** \addtogroup SAMA5D2_ACC Analog Comparator Controller */\r
+/*@{*/\r
+\r
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))\r
+/** \brief Acc hardware registers */\r
+typedef struct {\r
+ __O uint32_t ACC_CR; /**< \brief (Acc Offset: 0x00) Control Register */\r
+ __IO uint32_t ACC_MR; /**< \brief (Acc Offset: 0x04) Mode Register */\r
+ __I uint32_t Reserved1[7];\r
+ __O uint32_t ACC_IER; /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */\r
+ __O uint32_t ACC_IDR; /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */\r
+ __I uint32_t ACC_IMR; /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */\r
+ __I uint32_t ACC_ISR; /**< \brief (Acc Offset: 0x30) Interrupt Status Register */\r
+ __I uint32_t Reserved2[24];\r
+ __IO uint32_t ACC_ACR; /**< \brief (Acc Offset: 0x94) Analog Control Register */\r
+ __I uint32_t Reserved3[19];\r
+ __IO uint32_t ACC_WPMR; /**< \brief (Acc Offset: 0xE4) Write Protection Mode Register */\r
+ __I uint32_t ACC_WPSR; /**< \brief (Acc Offset: 0xE8) Write Protection Status Register */\r
+} Acc;\r
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */\r
+/* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */\r
+#define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) Software Reset */\r
+/* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */\r
+#define ACC_MR_SELMINUS_Pos 0\r
+#define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) Selection for Minus Comparator Input */\r
+#define ACC_MR_SELMINUS(value) ((ACC_MR_SELMINUS_Msk & ((value) << ACC_MR_SELMINUS_Pos)))\r
+#define ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) Select TS */\r
+#define ACC_MR_SELMINUS_ADVREF (0x1u << 0) /**< \brief (ACC_MR) Select ADVREF */\r
+#define ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */\r
+#define ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */\r
+#define ACC_MR_SELMINUS_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AD0 */\r
+#define ACC_MR_SELMINUS_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AD1 */\r
+#define ACC_MR_SELMINUS_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AD2 */\r
+#define ACC_MR_SELMINUS_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AD3 */\r
+#define ACC_MR_SELPLUS_Pos 4\r
+#define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) Selection For Plus Comparator Input */\r
+#define ACC_MR_SELPLUS(value) ((ACC_MR_SELPLUS_Msk & ((value) << ACC_MR_SELPLUS_Pos)))\r
+#define ACC_MR_SELPLUS_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AD0 */\r
+#define ACC_MR_SELPLUS_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AD1 */\r
+#define ACC_MR_SELPLUS_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AD2 */\r
+#define ACC_MR_SELPLUS_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AD3 */\r
+#define ACC_MR_SELPLUS_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AD4 */\r
+#define ACC_MR_SELPLUS_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AD5 */\r
+#define ACC_MR_SELPLUS_AD6 (0x6u << 4) /**< \brief (ACC_MR) Select AD6 */\r
+#define ACC_MR_SELPLUS_AD7 (0x7u << 4) /**< \brief (ACC_MR) Select AD7 */\r
+#define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enable */\r
+#define ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog comparator disabled. */\r
+#define ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog comparator enabled. */\r
+#define ACC_MR_EDGETYP_Pos 9\r
+#define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) Edge Type */\r
+#define ACC_MR_EDGETYP(value) ((ACC_MR_EDGETYP_Msk & ((value) << ACC_MR_EDGETYP_Pos)))\r
+#define ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) Only rising edge of comparator output */\r
+#define ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) Falling edge of comparator output */\r
+#define ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) Any edge of comparator output */\r
+#define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) Invert Comparator Output */\r
+#define ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog comparator output is directly processed. */\r
+#define ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog comparator output is inverted prior to being processed. */\r
+#define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) Selection Of Fault Source */\r
+#define ACC_MR_SELFS_CE (0x0u << 13) /**< \brief (ACC_MR) The CE flag is used to drive the FAULT output. */\r
+#define ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) The output of the analog comparator flag is used to drive the FAULT output. */\r
+#define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */\r
+#define ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) The FAULT output is tied to 0. */\r
+#define ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) The FAULT output is driven by the signal defined by SELFS. */\r
+/* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */\r
+#define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */\r
+/* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */\r
+#define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */\r
+/* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */\r
+#define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */\r
+/* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */\r
+#define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge (cleared on read) */\r
+#define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */\r
+#define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) Flag Mask */\r
+/* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */\r
+#define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current Selection */\r
+#define ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) Low-power option. */\r
+#define ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) High-speed option. */\r
+#define ACC_ACR_HYST_Pos 1\r
+#define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) Hysteresis Selection */\r
+#define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos)))\r
+/* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protection Mode Register -------- */\r
+#define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protection Enable */\r
+#define ACC_WPMR_WPKEY_Pos 8\r
+#define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protection Key */\r
+#define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos)))\r
+#define ACC_WPMR_WPKEY_PASSWD (0x414343u << 8) /**< \brief (ACC_WPMR) Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0. */\r
+/* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protection Status Register -------- */\r
+#define ACC_WPSR_WPVS (0x1u << 0) /**< \brief (ACC_WPSR) Write Protection Violation Status */\r
+\r
+/*@}*/\r
+\r
+#endif /* _SAMA5D2_ACC_COMPONENT_ */\r
projects / freertos / blobdiff