/*\r
- * FreeRTOS+TCP Labs Build 160919 (C) 2016 Real Time Engineers ltd.\r
- * Authors include Hein Tibosch and Richard Barry\r
+ * FreeRTOS+TCP V2.0.11\r
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.\r
*\r
- *******************************************************************************\r
- ***** NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ***\r
- *** ***\r
- *** ***\r
- *** FREERTOS+TCP IS STILL IN THE LAB (mainly because the FTP and HTTP ***\r
- *** demos have a dependency on FreeRTOS+FAT, which is only in the Labs ***\r
- *** download): ***\r
- *** ***\r
- *** FreeRTOS+TCP is functional and has been used in commercial products ***\r
- *** for some time. Be aware however that we are still refining its ***\r
- *** design, the source code does not yet quite conform to the strict ***\r
- *** coding and style standards mandated by Real Time Engineers ltd., and ***\r
- *** the documentation and testing is not necessarily complete. ***\r
- *** ***\r
- *** PLEASE REPORT EXPERIENCES USING THE SUPPORT RESOURCES FOUND ON THE ***\r
- *** URL: http://www.FreeRTOS.org/contact Active early adopters may, at ***\r
- *** the sole discretion of Real Time Engineers Ltd., be offered versions ***\r
- *** under a license other than that described below. ***\r
- *** ***\r
- *** ***\r
- ***** NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ***\r
- *******************************************************************************\r
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of\r
+ * this software and associated documentation files (the "Software"), to deal in\r
+ * the Software without restriction, including without limitation the rights to\r
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of\r
+ * the Software, and to permit persons to whom the Software is furnished to do so,\r
+ * subject to the following conditions:\r
*\r
- * FreeRTOS+TCP can be used under two different free open source licenses. The\r
- * license that applies is dependent on the processor on which FreeRTOS+TCP is\r
- * executed, as follows:\r
+ * The above copyright notice and this permission notice shall be included in all\r
+ * copies or substantial portions of the Software.\r
*\r
- * If FreeRTOS+TCP is executed on one of the processors listed under the Special\r
- * License Arrangements heading of the FreeRTOS+TCP license information web\r
- * page, then it can be used under the terms of the FreeRTOS Open Source\r
- * License. If FreeRTOS+TCP is used on any other processor, then it can be used\r
- * under the terms of the GNU General Public License V2. Links to the relevant\r
- * licenses follow:\r
- *\r
- * The FreeRTOS+TCP License Information Page: http://www.FreeRTOS.org/tcp_license\r
- * The FreeRTOS Open Source License: http://www.FreeRTOS.org/license\r
- * The GNU General Public License Version 2: http://www.FreeRTOS.org/gpl-2.0.txt\r
- *\r
- * FreeRTOS+TCP is distributed in the hope that it will be useful. You cannot\r
- * use FreeRTOS+TCP unless you agree that you use the software 'as is'.\r
- * FreeRTOS+TCP is provided WITHOUT ANY WARRANTY; without even the implied\r
- * warranties of NON-INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR\r
- * PURPOSE. Real Time Engineers Ltd. disclaims all conditions and terms, be they\r
- * implied, expressed, or statutory.\r
- *\r
- * 1 tab == 4 spaces!\r
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS\r
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR\r
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
*\r
+ * http://aws.amazon.com/freertos\r
* http://www.FreeRTOS.org\r
- * http://www.FreeRTOS.org/plus\r
- * http://www.FreeRTOS.org/labs\r
- *\r
*/\r
\r
/* Standard includes. */\r
and\r
xIPHeader.usHeaderChecksum\r
*/\r
-\r
/* Save options now, as they will be overwritten by memcpy */\r
#if( ipconfigDRIVER_INCLUDED_TX_IP_CHECKSUM == 0 )\r
- {\r
ucSocketOptions = pxNetworkBuffer->pucEthernetBuffer[ ipSOCKET_OPTIONS_OFFSET ];\r
- }\r
#endif\r
-\r
- memcpy( ( void *) &( pxUDPPacket->xEthernetHeader.xSourceAddress ), ( void * ) xDefaultPartUDPPacketHeader.ucBytes, sizeof( xDefaultPartUDPPacketHeader ) );\r
+ /*\r
+ * Offset the memcpy by the size of a MAC address to start at the packet's\r
+ * Ethernet header 'source' MAC address; the preceding 'destination' should not be altered.\r
+ */\r
+ char *pxUdpSrcAddrOffset = ( char *) pxUDPPacket + sizeof( MACAddress_t );\r
+ memcpy( pxUdpSrcAddrOffset, xDefaultPartUDPPacketHeader.ucBytes, sizeof( xDefaultPartUDPPacketHeader ) );\r
\r
#if ipconfigSUPPORT_OUTGOING_PINGS == 1\r
if( pxNetworkBuffer->usPort == ipPACKET_CONTAINS_ICMP_DATA )\r
/* The total transmit size adds on the Ethernet header. */\r
pxNetworkBuffer->xDataLength = pxIPHeader->usLength + sizeof( EthernetHeader_t );\r
pxIPHeader->usLength = FreeRTOS_htons( pxIPHeader->usLength );\r
+ /* HT:endian: changed back to network endian */\r
pxIPHeader->ulDestinationIPAddress = pxNetworkBuffer->ulIPAddress;\r
\r
#if( ipconfigUSE_LLMNR == 1 )\r
\r
if( ( ucSocketOptions & ( uint8_t ) FREERTOS_SO_UDPCKSUM_OUT ) != 0u )\r
{\r
- usGenerateProtocolChecksum( (uint8_t*)pxUDPPacket, pdTRUE );\r
+ usGenerateProtocolChecksum( (uint8_t*)pxUDPPacket, pxNetworkBuffer->xDataLength, pdTRUE );\r
}\r
else\r
{\r
\r
UDPPacket_t *pxUDPPacket = (UDPPacket_t *) pxNetworkBuffer->pucEthernetBuffer;\r
\r
+ /* Caller must check for minimum packet size. */\r
pxSocket = pxUDPSocketLookup( usPort );\r
\r
if( pxSocket )\r
destinationAddress.sin_addr = pxUDPPacket->xIPHeader.ulDestinationIPAddress;\r
\r
if( xHandler( ( Socket_t * ) pxSocket, ( void* ) pcData, ( size_t ) pxNetworkBuffer->xDataLength,\r
- &xSourceAddress, &destinationAddress ) != pdFALSE )\r
+ &xSourceAddress, &destinationAddress ) )\r
{\r
- xReturn = pdFAIL; /* xHandler has consumed the data, do not add it to .xWaitingPacketsList'. */\r
+ xReturn = pdFAIL; /* FAIL means that we did not consume or release the buffer */\r
}\r
}\r
}\r
/* There is no socket listening to the target port, but still it might\r
be for this node. */\r
\r
- #if( ipconfigUSE_DNS == 1 )\r
- /* A DNS reply, check for the source port. Although the DNS client\r
- does open a UDP socket to send a messages, this socket will be\r
- closed after a short timeout. Messages that come late (after the\r
- socket is closed) will be treated here. */\r
- if( FreeRTOS_ntohs( pxUDPPacket->xUDPHeader.usSourcePort ) == ipDNS_PORT )\r
- {\r
- vARPRefreshCacheEntry( &( pxUDPPacket->xEthernetHeader.xSourceAddress ), pxUDPPacket->xIPHeader.ulSourceIPAddress );\r
- xReturn = ( BaseType_t )ulDNSHandlePacket( pxNetworkBuffer );\r
- }\r
- else\r
- #endif\r
-\r
#if( ipconfigUSE_LLMNR == 1 )\r
- /* A LLMNR request, check for the destination port. */\r
+ /* a LLMNR request, check for the destination port. */\r
if( ( usPort == FreeRTOS_ntohs( ipLLMNR_PORT ) ) ||\r
( pxUDPPacket->xUDPHeader.usSourcePort == FreeRTOS_ntohs( ipLLMNR_PORT ) ) )\r
{\r
projects / freertos / blobdiff