ppc4xx: Add missing file for Bamboo NAND booting support

[u-boot] / Makefile

diff --git a/Makefile b/Makefile
index a668d4556e6117c351d6fe85f6fc0d2bfb2ec3e7..463757c43b2cb29f5b7b7a05e0ace8d70a41926c 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -197,6 +197,9 @@ LIBS += cpu/$(CPU)/lib$(CPU).a
 ifdef SOC
 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 endif
+ifeq ($(CPU),ixp)
+LIBS += cpu/ixp/npe/libnpe.a
+endif
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
        fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
@@ -219,7 +222,7 @@ LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
 LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
        "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
 LIBS += common/libcommon.a
-LIBS += $(BOARDLIBS)
+LIBS += libfdt/libfdt.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
 .PHONY : $(LIBS)
@@ -430,6 +433,7 @@ inka4x0_config:     unconfig
        @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
 lite5200b_config       \
+lite5200b_PM_config    \
 lite5200b_LOWBOOT_config:      unconfig
        @mkdir -p $(obj)include
        @mkdir -p $(obj)board/icecube
@@ -438,6 +442,10 @@ lite5200b_LOWBOOT_config:  unconfig
        @ echo "... DDR memory revision"
        @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
        @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
+       @[ -z "$(findstring _PM_,$@)" ] || \
+               { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
+                 echo "... with power management (low-power mode) support" ; \
+               }
        @[ -z "$(findstring LOWBOOT_,$@)" ] || \
                { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
                  echo "... with LOWBOOT configuration" ; \
@@ -1030,6 +1038,15 @@ ASH405_config:   unconfig
 bamboo_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
 
+bamboo_nand_config:    unconfig
+       @mkdir -p $(obj)include
+       @mkdir -p $(obj)nand_spl
+       @mkdir -p $(obj)board/amcc/bamboo
+       @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+       @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
+       @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
+       @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 bubinga_config:        unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
 
@@ -1618,6 +1635,19 @@ r5200_config :           unconfig
 ## MPC83xx Systems
 #########################################################################
 
+MPC8313ERDB_33_config \
+MPC8313ERDB_66_config: unconfig
+       @echo "" >include/config.h ; \
+       if [ "$(findstring _33_,$@)" ] ; then \
+               echo -n "...33M ..." ; \
+               echo "#define CFG_33MHZ" >>include/config.h ; \
+       fi ; \
+       if [ "$(findstring _66_,$@)" ] ; then \
+               echo -n "...66M..." ; \
+               echo "#define CFG_66MHZ" >>include/config.h ; \
+       fi ;
+       @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
+
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
@@ -1724,12 +1754,18 @@ MPC8560ADS_config:      unconfig
 MPC8541CDS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
 
+MPC8544DS_config:      unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+
 MPC8548CDS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
 
 MPC8555CDS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
 
+MPC8568MDS_config:     unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+
 PM854_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
 
@@ -1765,6 +1801,9 @@ sbc8560_66_config:      unconfig
 stxgp3_config:         unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
 
+stxssa_config:         unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa
+
 TQM8540_config         \
 TQM8541_config         \
 TQM8555_config         \
@@ -1814,6 +1853,9 @@ EVB64260_config   \
 EVB64260_750CX_config: unconfig
        @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
 
+mpc7448hpc2_config:  unconfig
+       @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
+
 P3G4_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260