LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
LIBS-y += fs/libfs.o \
- fs/cbfs/libcbfs.o \
- fs/cramfs/libcramfs.o \
- fs/ext4/libext4fs.o \
- fs/fat/libfat.o \
- fs/fdos/libfdos.o \
- fs/jffs2/libjffs2.o \
- fs/reiserfs/libreiserfs.o \
- fs/sandbox/libsandboxfs.o \
- fs/ubifs/libubifs.o \
- fs/yaffs2/libyaffs2.o \
- fs/zfs/libzfs.o
+ fs/fat/libfat.o
LIBS-y += net/libnet.o
LIBS-y += disk/libdisk.o
-LIBS-y += drivers/bios_emulator/libatibiosemu.o
-LIBS-y += drivers/block/libblock.o
-LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
-LIBS-y += drivers/crypto/libcrypto.o
+LIBS-y += drivers/libdrivers.o
LIBS-y += drivers/dma/libdma.o
-LIBS-y += drivers/fpga/libfpga.o
LIBS-y += drivers/gpio/libgpio.o
-LIBS-y += drivers/hwmon/libhwmon.o
LIBS-y += drivers/i2c/libi2c.o
LIBS-y += drivers/input/libinput.o
-LIBS-y += drivers/misc/libmisc.o
LIBS-y += drivers/mmc/libmmc.o
LIBS-y += drivers/mtd/libmtd.o
LIBS-y += drivers/mtd/nand/libnand.o
LIBS-y += drivers/net/libnet.o
LIBS-y += drivers/net/phy/libphy.o
LIBS-y += drivers/pci/libpci.o
-LIBS-y += drivers/pcmcia/libpcmcia.o
LIBS-y += drivers/power/libpower.o \
drivers/power/fuel_gauge/libfuel_gauge.o \
drivers/power/mfd/libmfd.o \
drivers/power/pmic/libpmic.o \
drivers/power/battery/libbattery.o
LIBS-y += drivers/spi/libspi.o
-LIBS-y += drivers/dfu/libdfu.o
ifeq ($(CPU),mpc83xx)
LIBS-y += drivers/qe/libqe.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
-LIBS-y += drivers/rtc/librtc.o
LIBS-y += drivers/serial/libserial.o
-LIBS-y += drivers/sound/libsound.o
-LIBS-y += drivers/tpm/libtpm.o
-LIBS-y += drivers/twserial/libtws.o
LIBS-y += drivers/usb/eth/libusb_eth.o
LIBS-y += drivers/usb/gadget/libusb_gadget.o
LIBS-y += drivers/usb/host/libusb_host.o
LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
LIBS-y += drivers/usb/phy/libusb_phy.o
LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
-LIBS-y += drivers/video/libvideo.o
-LIBS-y += drivers/watchdog/libwatchdog.o
LIBS-y += common/libcommon.o
LIBS-y += lib/libfdt/libfdt.o
LIBS-y += api/libapi.o
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
-ifneq ($(CONFIG_OMAP_COMMON),)
-LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
-endif
-
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
-ifeq ($(SOC),s5pc1xx)
-LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
-endif
-ifeq ($(SOC),exynos)
-LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
-endif
-ifneq ($(CONFIG_TEGRA),)
-LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
-LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
-LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
-endif
+LIBS-$(CONFIG_ARM) += arch/arm/cpu/libcpu.o
LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
.PHONY : $(LIBS)
all: $(ALL-y) $(SUBDIR_EXAMPLES)
$(obj)u-boot.dtb: checkdtc $(obj)u-boot
- $(MAKE) -C dts binary
+ $(MAKE) $(build) dts binary
mv $(obj)dts/dt.dtb $@
$(obj)u-boot-dtb.bin: $(obj)u-boot.bin $(obj)u-boot.dtb
$(GEN_UBOOT) $(obj)common/system_map.o
endif
-# Tentative step for Kbuild-style makefiles coexist with conventional U-Boot style makefiles
-# U-Boot conventional sub makefiles always include some other makefiles.
-# So, the build system searches a line beginning with "include" before entering into the sub makefile
-# in order to distinguish which style it is.
-# If the Makefile include a "include" line, we assume it is an U-Boot style makefile.
-# Otherwise, it is treated as a Kbuild-style makefile.
-select_makefile = \
- +if grep -q "^include" $1/Makefile; then \
- $(MAKE) -C $1; \
- else \
- $(MAKE) -C $1 -f $(TOPDIR)/scripts/Makefile.build; \
- mv $(dir $@)built-in.o $@; \
- fi
-
-# We do not need to build $(OBJS) explicitly.
-# It is built while we are at $(CPUDIR)/lib$(CPU).o build.
-$(OBJS): depend
- if grep -q "^include" $(CPUDIR)/Makefile; then \
- $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@)); \
- fi
+$(OBJS):
+ @:
$(LIBS): depend $(SUBDIR_TOOLS)
- +$(call select_makefile, $(dir $(subst $(obj),,$@)))
+ $(MAKE) $(build) $(dir $(subst $(obj),,$@))
+ mv $(dir $@)built-in.o $@
$(LIBBOARD): depend $(LIBS)
- +$(call select_makefile, $(dir $(subst $(obj),,$@)))
+ $(MAKE) $(build) $(dir $(subst $(obj),,$@))
+ mv $(dir $@)built-in.o $@
$(SUBDIRS): depend
$(MAKE) -C $@ all
updater:
$(MAKE) -C tools/updater all
-select_makefile2 = \
- if grep -q "^include" $1/Makefile; then \
- $(MAKE) -C $1 _depend; \
- else \
- $(MAKE) -C $1 -f $(TOPDIR)/scripts/Makefile.build _depend; \
- fi
-
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h \
$(obj)include/generated/asm-offsets.h
- +for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
- $(call select_makefile2, $$dir); \
- done
TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
projects / u-boot / blobdiff