#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
#
VERSION = 1
-PATCHLEVEL = 2
+PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc3
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/powerpc/ppc/ \
+ -e s/ppc64/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
+CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
OBJS := $(addprefix $(obj),$(OBJS))
LIBS = lib_generic/libgeneric.a
+LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
+ "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
ifdef SOC
LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
+LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/nand/libnand.a
LIBS += drivers/nand_legacy/libnand_legacy.a
+LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/net/libnet.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
+ifeq ($(CPU),mpc85xx)
+LIBS += drivers/qe/qe.a
+endif
+LIBS += drivers/serial/libserial.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
env:
$(MAKE) -C tools/env all || exit 1
-depend dep:
+depend dep: version
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
tags ctags:
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
- @./mkconfig -a v38b ppc mpc5xxx v38b
+ @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -a Adder ppc mpc8xx adder
+AdderUSB_config: unconfig
+ @./mkconfig -a AdderUSB ppc mpc8xx adder
+
ADS860_config \
FADS823_config \
FADS850SAR_config \
@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
acadia_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/acadia
+ @mkdir -p $(obj)include $(obj)board/amcc/acadia
+ @mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
alpr_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/bamboo
+ @mkdir -p $(obj)include $(obj)board/amcc/bamboo
+ @mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
G2000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
+hcu4_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
+
+hcu5_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
+
HH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
sequoia_nand_config \
rainier_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/sequoia
+ @mkdir -p $(obj)include $(obj)board/amcc/sequoia
+ @mkdir -p $(obj)nand_spl/board/amcc/sequoia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
sc3_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx sc3
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+
+taihu_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
taishan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
yucca_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
+zeus_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+
#########################################################################
## MPC8220 Systems
#########################################################################
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
ep82xxm_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
gw8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
## Coldfire
#########################################################################
+M5235EVB_config \
+M5235EVB_Flash16_config \
+M5235EVB_Flash32_config: unconfig
+ @case "$@" in \
+ M5235EVB_config) FLASH=16;; \
+ M5235EVB_Flash16_config) FLASH=16;; \
+ M5235EVB_Flash32_config) FLASH=32;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${FLASH}" != "16" ] ; then \
+ echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \
+ echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+ else \
+ echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+ fi
+ @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
+
+M5249EVB_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
+
+M5253EVBE_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
+
cobra5272_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
r5200_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
+M5329AFEE_config \
+M5329BFEE_config : unconfig
+ @case "$@" in \
+ M5329AFEE_config) NAND=0;; \
+ M5329BFEE_config) NAND=16;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${NAND}" != "0" ] ; then \
+ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+
+M54455EVB_config \
+M54455EVB_atmel_config \
+M54455EVB_intel_config \
+M54455EVB_a33_config \
+M54455EVB_a66_config \
+M54455EVB_i33_config \
+M54455EVB_i66_config : unconfig
+ @case "$@" in \
+ M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
+ M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
+ M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
+ M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
+ M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
+ M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
+ M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${FLASH}" == "INTEL" ] ; then \
+ echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "... with INTEL boot..." ; \
+ else \
+ echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "... with ATMEL boot..." ; \
+ fi; \
+ echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+ echo "... with $${FREQ}Hz input clock"
+ @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
- echo "#define CFG_33MHZ" >>include/config.h ; \
+ echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
- echo "#define CFG_66MHZ" >>include/config.h ; \
+ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
+ @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+
+MPC8323ERDB_config: unconfig
+ @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config: unconfig
- @echo "" >include/config.h ; \
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
echo -n "... PCI HOST " ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
- echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
- echo "#define PCI_33M" >>include/config.h ; \
+ echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
- echo "#define PCI_66M" >>include/config.h ; \
- fi ;
- @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
+ echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)board/mpc8349itx
+ @mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
- echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
- echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
- @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx
+ @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config: unconfig
- @echo "" >include/config.h ; \
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
echo -n "... PCI HOST " ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
- echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
- echo "#define PCI_33M" >>include/config.h ; \
+ echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
- echo "#define PCI_66M" >>include/config.h ; \
+ echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+ @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "... 33 MHz PCI" ; \
+ echo "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
- echo -n "... 66 MHz PCI" ; \
+ echo "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
MPC8560ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _legacy_,$@)" ] ; then \
+ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+ echo "... legacy" ; \
+ fi
+ @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _legacy_,$@)" ] ; then \
+ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+ echo "... legacy" ; \
+ fi
+ @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _legacy_,$@)" ] ; then \
+ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+ echo "... legacy" ; \
+ fi
+ @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
- echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h
+ echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
#########################################################################
#########################################################################
MPC8641HPCN_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+sbc8641d_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d
#########################################################################
## 74xx/7xx Systems
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
+davinci_dvevm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
+
+davinci_schmoogie_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
+
+davinci_sonata_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
echo "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
echo "... configured for CS_AUTO boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
pdnb3_config \
scpu_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
- echo "#define CONFIG_SCPU" >>include/config.h ; \
+ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
echo "... on SCPU board variant" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
+trizepsiv_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
+
wepep250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa wepep250
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
ml401_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_ML401 1" >> include/config.h
- @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
xupv2p_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_XUPV2P 1" >> include/config.h
- @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#########################################################################
## Blackfin
#########################################################################
atstk1002_config : unconfig
- @./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
#########################################################################
#########################################################################